SAFAVIEH COUTURE Zayna SFV4709 User manual

CARE AND MAINTENANCE
NOTICE
4X
B Chassis 1X
4X
C
Pedal
1X
SAFAVIEH
The base and hardware are located around the chair
4X
Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
C O U T U R E
SFV4709
Dimensions:21.26"WX24.41"DX36.02"H~44.1"H
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE WASHER/SCREWS
D
Air Bolt Pole
1X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
CARE AND MAINTENANCE
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.25*30MM
HW1
HW2
HW3
HW4

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
PREPARATION
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
C
A
↓
D
B
↓
STEP1 OPEN THE CARTON BOX AND TAKE OUT
BASE AND HARDWARE
STEP2 PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
STEP3 INSERT THE PEDAL AND SCREW IN THE
SCREW. REPEAT THE SAME STEPS FOR THE
OTHER THREE.
STEP4 PUT THE AIR BOLT POLE INTO THE CHASSIS
WOLE, IT WILL CONNECT FIRMLY ONCE SOMEONE SITS
AFTER FINISHED
STEP5 PUT THE FINISHED PART OF STEP3 AND STEP4
TOGETHER, IT WILL CONNECT FIRMLY ONCE
SOMEONE SITS AFTER FINISHED
STEP6 FINISHED.
HW2 HW1 HW3
HW4
The base and hardware are located around the chair