SAFAVIEH COUTURE Tulsa SFV5108 User manual

NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email customersuppo[email protected]m
Model# SFV5108
PREPARATION Product Dimensions: 46.90" W x 20.90" D x 16.90" H
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
Parts List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
A Leg 1X
B Leg 1X
C Leg 1X
Weight Capacity: 550 lbs
D Leg 1X
WARNING: DO NOT STAND ON BENCH
E Seat 1X WARNING: DO NOT OVER TORQUE BOLTS
/ Plastic washer 4X

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 3：PLEASE TIGHTEN THE LEGS.
STEP 1：TURN THE BENCH SEAT UPSIDE DOWN.
STEP 2：INSERT THE LEGS AND SCREW THE LEGS BUT DON'T TIGHTEN
COMPLETELY. REPEAT THE SAME STEPS FOR THE OTHER THREE LEGS.
STEP 4：PUT THE BENCH UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL.
IF THE BENCH SLIGHT WOBBLE, YOU CAN ADJUST THE LEGS BY ADDING
PLASTIC WASHER AFTER ROTATING.
E
E
A
C
D
B
E
C
D
A
B
A
D
B
C