SAFAVIEH COUTURE SFV8200A-K User manual

CARE AND MAINTENANCE
PREPARATION Product Dimensions: W: 79.2" x D: 83.8 x H: 50.7"
Item ID : SFV8200A-K
NOTICE
Warning : Do not stand on the bed.
Warning : Do not over torque bolts.
WEIGHT CAPACITY: LBS.
800
WARNING:
* Please make sure that you have all parts indicated and they are in good
condition before you begin assembly of this item. Refer to part list and
hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching
the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email cutomer[email protected]
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contens list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 30 minutes.
* Tools Required for Assembly (included): Wrench & L Key
Adhesive felt pads should always be applied to areas of furniture which make
direct contact with flooring, said application will prevent damage to the furniture
and or surfaces on which the furniture lies. Objects placed on articles of furniture
should rest on non abrasive material as to prevent damage to the wood finish.
Objects whose composition consists of plastic and rubber are known to discolor
and damage the wood surfaces on which they rest. Wipe up spills immediately
and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water
or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from scratches and spills. How often you apply the wax depends on how much
wear the furniture receives.

PIECE
QUANTITY PIECE QUANTITY
A 1X HW1 4X
B 1X HW2 4X
C 2X HW3 4X
D 4X HW4 4X
E 4X HW5 4X
HW6 12X
HW7 1X
HW8 1X
Hex Bolt
Wrench
Allen Key
Split Washer
Washer
Hex Nuts
Bed End Frame
Long Side Frame
Cross Slat
Center Support Leg
Part List and Hardware List
DESCRIPTION PICTURE DESCRIPTION PICTURE
Long Bolt
Curve Iron Plate
Headboard
8 x 0,5 x 80 mm
20 x 8 x 45 mm
Ø 8mm
Ø 8mm
Ø 8mm
13 x 0,2 x 42 mm
L Key 12
0,4 mm

PREPARATION
STEP 1 :
Assemble Headboard (A) and Long side frame (C) with Long bolt
(HW1), Curve iron plate (HW2), Split washer (HW3), Washer
(HW4), and Hex Nuts (HW5) and fasten it by Wrench (HW7).
STEP 2 :
Assemble Bed end frame (B) and Long side frame (C) with Long
bolt (HW1), Curve iron plate (HW2), Split washer (HW3), Washer
(HW4), and Hex Nuts (HW5) and fasten it by Wrench (HW7).
A
CHW
1
HW
5
HW
4
HW
3
HW
2
HW
2
HW
3
HW
4
HW
5
HW
1
B
C
C
C
A
B
C
C
A
B
*Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Wrench & Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email customer[email protected]

PREPARATION
STEP 3 :
Assemble Cross slat (D) and Center support leg (E) with Hex bolt
(HW6), and fasten it by Allen key (HW8).
STEP 4 :
Assemble Cross slat (D) - Center support leg (E) and Long side frame (C)
with Hex bolt (HW6), and fasten it by Allen key (HW8).
C
E
A
B
D-E
D
HW
8HW
6
C
D-E
HW
8
HW
6
C
E
D
*Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Wrench & Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email customer[email protected]

NOTICE
CARE AND MAINTENANCE
PREPARATION Product Dimensions: W: 63.7" x D: 82.6" x H: 50.7"
Item ID : SFV8200A-Q
Warning : Do not stand on the bed.
Warning : Do not over torque bolts.
WEIGHT CAPACITY: LBS.
800
WARNING:
* Please make sure that you have all parts indicated and they are in good
condition before you begin assembly of this item. Refer to part list and
hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching
the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [e-mail]
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contens list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 30 minutes.
* Tools Required for Assembly (included): Wrench & L Key
Adhesive felt pads should always be applied to areas of furniture which make
direct contact with flooring, said application will prevent damage to the furniture
and or surfaces on which the furniture lies. Objects placed on articles of furniture
should rest on non abrasive material as to prevent damage to the wood finish.
Objects whose composition consists of plastic and rubber are known to discolor
and damage the wood surfaces on which they rest. Wipe up spills immediately
and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water
or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from scratches and spills. How often you apply the wax depends on how much
wear the furniture receives.

PIECE
QUANTITY PIECE QUANTITY
A 1X HW1 4X
B 1X HW2 4X
C 2X HW3 4X
D 4X HW4 4X
E 4X HW5 4X
HW6 12X
HW7 1X
HW8 1X
Headboard
Bed End Frame
Long Side Frame
Cross Slat
Center Support Leg
Part List and Hardware List
DESCRIPTION PICTURE DESCRIPTION PICTURE
Long Bolt
Curve Iron Plate
Split Washer
Washer
Hex Nuts
Hex Bolt
Wrench
Allen Key
8 x 0,5 x 80 mm
20 x 8 x 45 mm
Ø 8mm
Ø 8mm
Ø 8mm
13 x 0,2 x 42 mm
L Key 12
0,4 mm

PREPARATION
STEP 1 :
Assemble Headboard (A) and Long side frame (C) with Long bolt
(HW1), Curve iron plate (HW2), Split washer (HW3), Washer
(HW4), and Hex Nuts (HW5) and fasten it by Wrench (HW7).
STEP 2 :
Assemble Bed end frame (B) and Long side frame (C) with Long
bolt (HW1), Curve iron plate (HW2), Split washer (HW3), Washer
(HW4), and Hex Nuts (HW5) and fasten it by Wrench (HW7).
A
CHW
1
HW
5
HW
4
HW
3
HW
2
HW
2
HW
3
HW
4
HW
5
HW
1
B
C
C
C
A
B
C
C
A
B
*Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Wrench & Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email custom[email protected]

PREPARATION
STEP 3 :
Assemble Cross slat (D) and Center support leg (E) with Hex bolt
(HW6), and fasten it by Allen key (HW8).
STEP 4 :
Assemble Cross slat (D) - Center support leg (E) and Long side frame (C)
with Hex bolt (HW6), and fasten it by Allen key (HW8).
C
E
A
B
D-E
D
HW
8HW
6
C
D-E
HW
8
HW
6
C
E
D
*Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Wrench & Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email custom[email protected]