SAFAVIEH COUTURE SFV4113-K User manual

* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 45 minutes.
* Tools Required for Assembly (included): Allen Key, (Not included): Phillips Screwdriver.Spanner;
PREPARATION
CARE AND MAINTENANCE
NOTICE
* Please make sure that you have all parts indicated and they are in good condion before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during
assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
* Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
* The use of steam or water-based cleaners may cause excessive shrinking or staining.
Weight capacity: 800lbs
Warning: DO NOT STAND ON BED
Warning: DO NOT OVER TORQUE BOLTS
!!
WARNING
C O U T U R E
Item ID: SFV4113-K
Product Dimensions: 85 5/8”W x 94”D x 32 2/3”H

PIECE QUANTITY
DESCRIPTION CARTON CALL PIECE QUANTITY DESCRIPTION CARTON CALL
Part List and Hardware List
1X
H
CENTRE SUPPORT RAIL 2X
6X
5X
I
J
K
CENTRE LEGS
SLATS
1 of 2
2 of 2
2 of 2
2 of 2
1 of 2
HW5
Nut 8mm
10X
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2
Spanner
Screw 4x0.5x30mm
Small cross bolt 6x0.5x40mm
Allen key
Big cross bolt 8x0.5x90mm
Flat washer 8mm
Medium cross bolt 8x0.5x40mm
1X
10X
6X
1X
4X
4X
6X
BACK LEGS (RIGHT)
1 of 2
1 of 2
1 of 2
1 of 2
HW1 Wooden dowel Ø10mm
Metal thread 8x0.5x70mm
Semicircle washer 7x15x30mm
Spring washer 8mm
14X
10X
10X
14X
HW2
HW3
HW4
HW6
HW7
HW8
HW9
HW10
HW11
HW12
HEADBOARD
FOOTBOARD
SIDE RAILS (LEFT)
A
B
C
1 of 2
1X
2 of 2
2 of 2
2 of 2
1X
1X
1X
D
E
F
G
SIDE RAILS (RIGHT)
FRONT LEGS (LEFT)
FRONT LEGS (RIGHT)
BACK LEGS (LEFT)
1 of 2
1 of 2
1 of 2
1X
1X
1X

* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 45 minutes.
* Tools Required for Assembly (included): Allen Key, ; (Not included): Phillips Screwdriver.Spanner
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
PREPARATION
D
HW1
STEP 1: Assemble wooden dowel (HW1) in the headboard (A) STEP 2: Aach (I) and centre legs (F) by centre support rail
A
HW1
HW1
HW1
I
J
HW9
HW8
J
J
small cross bolt (HW8) as shown.
B
HW1
HW1
C
HW1
HW1
and side rails (C&D)

C
D
B
A
HW2
STEP 3: Assemble Side rail (C & D) to the footboard (B) and (A) using Metal thread (HW2) headboard

STEP 4: Assemble Semicircle washer (HW3), spring washer (HW4) and nut (HW5) in the structure in Step 3
HW3
HW4
HW5
HW6

STEP 5: Assemble front leg (E & F), back leg (G & H) on to the structure in Step 4 using the Metal thread (HW2), spring washer (HW4), Big cross bolt (HW10),
Flat washer (HW11), Medium cross bolt (HW12) as shown.
HW9
HW10
HW4 HW11
HW2
HW12
HW9
HW12
HW9
E
F
G
H

HW4
HW5
HW4
HW6
HW3
STEP 6: Assemble Semicircle washer (HW3), spring washer (HW4) and nut (HW5) in the structure in Step 5 as shown.
Insert the central support rail into the bed frame.

K
K
K
HW7
STEP 7: Insert the slats into the side and central rail and secure using screw (HW7).