SAFAVIEH COUTURE Geode SFV4745 User manual

CARE AND MAINTENANCE
NOTICE
B󰾡 2X
C 2X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
A Seat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening SFV4745
Dimensions:
Front Leg
Back Leg
C O U T U R E
29.13''W*32.28''D*44.88''H
WARNING: DO NOT STAND ON
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
CHAIR
The legs and hardware are located underneath the
in the zipper compartment
Chair
D Plastic Washer 4X
Weight Capacity: 275 lbs

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE
STEP1
ROTATE THE LEGS UNTIL TIGHTEN AS SHOWN IN THE
PICTURE. CLOSE THE ZIPPER ON THE UNDERSIDE OF
THE SEAT.
STEP2
STEP3
A
A
The legs and hardware are located underneath the Chair in the zipper compartment
PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE
LEVEN. IF THE CHAIR WOBBLY, YOU CAN ADJUST LEGS
BY ADDING PLASTIC WASHER(D)BEFORE ROTATING.