SAFAVIEH COUTURE Arcelia SFV3544A User manual

Product dimensions: 40"W x 20"D x 68"H
Item# SFV3544
NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [e-mail]
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents
list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.
*Tools Required for Assembly (not included): Screwdriver
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards
such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth
dampened with water or furniture polish. On highly used surfaces we recommend applying a quality paste
wax which should be used on a regular basis to provide additional protection from scratches and spills. How
often you apply the wax depends on how much wear the furniture receives.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A
ACRYLIC LEG 4X
B
2X
C
HW1
ACRYLIC KNOB
2X
Weight Capacity: 300 LBS
Warning: Do not stand on Cabinet.
Warning: Do not over torque bolts.
CABINET 1X
WARNING
PHILLIPS SCREW:M4x0.7x25mm

PREPARATION
.
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.
*Tools Required for Assembly (not included): Screwdriver
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Step 1 : Place the cabinet(A) lie down and the front side face
up. Attach acrylic leg(B) to the cabinet by screwing inserted
bolt on it.
Step 2 : Open the Cabinet doors, use Screw Driver to loosen
the bolt(HW1) on it from outside of door.
B
A

HW1
C
Step 3 : Align the hardware to the predrilled holes of front
panel of door, insert bolt(HW1) from inside of door and
tighten by Screw Driver in the same way.
PREPARATION
.
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.
*Tools Required for Assembly (not included): Screwdriver
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]