Safavieh Furniture BST8500A User manual

ITEM ID: BST8500A/B/C/D
PRODUCT DIMENSION: 19.3"W X20.9"D X44.2"H
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of
this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list
and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
CAREANDMAINTENANCE
Adhesive felt pads should always be applied to areas of furniture which make direct contact with flooring, said
application will prevent damage to the furniture and or surfaces on which the furniture lies. Objects placed on
articles of furniture should rest on non abrasive material as to prevent damage to the wood finish. Objects whose
composition consist of plastic and rubber are known to discolor and damage the wood surfaces on which they
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
PIECE DESCRIPTION QUANTITY Weight Capacity: 225LBS
A BACK REST 1X
B LEFT LEG FRAME 1X
C RIGHT LEG FRAME 1X
D SHORT STRETCHER 1X
E MIDDLE STRETCHER 1X
F LONG STRETCHER 1X
HW1 SCREW 12X
HW2 ALLEN WRENCH 1X
PartListandHardwareList
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT ROCK BACK AND FORTH OR
SIDE TO SIDE ON CHAIR
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much the
furniture wears.
PICTURE
HW3 WOOD PLUG 6X

STEP3:
Please make sure screws are secured tightly. Insert
STEP1:
Assemble Short Stretcher (D), Middle Stretcher( E), and
STEP2:
Position the frame assembly into the bottom of chair seat. Align
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
HW1
HW2
B
D
C
HW1
HW2
(FL) (FR) A
E
F
(FL)
(FR)
(FL)
(FR)
HW3 HW3
HW3
HW3HW3 HW3
STEP3:
Please make sure screws are secured tightly. Insert
Wood Plug (HW3) to cover the hole in stretcher.
STEP1:
Assemble Short Stretcher (D), Middle Stretcher( E), and
Long Stretcher ( F) using Screw (HW1) and Allen Wrench (HW2).
(Do not tighten yet.)
STEP2:
Position the frame assembly into the bottom of chair seat. Align
and tighten bolt on chair seat and frame using the Screw (HW1) with
Allen Wrench (HW2). Tighten all the screw in Step1 and Step2
STEP4: Before use, please make sure screws are secured tightly
before sitting.