Safavieh Furniture Edgecombe COF7010 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Table top
1x
B
Leg frame
4x
HW1
Hex bolt: 6x0.5x16mm
16x
HW2
Flat washer: 6mm
16x
HW3
Allen key
1x
NOTICE
*Please make sure that you have all parts indicated and they are in goodcondition beforeyou beginassemblyof
thisitem.Referto partlistand hardware listbelow forguidance.
*Thisitemshouldbe assembledon asoftsurfaceto prevent scratching the finish during assembly.
*Thisitemmayrequireperiodictightening.
*Ifyou arehavingdifficulty,ourfriendlyCustomer Careteam is always here to help.Pleaseemail
[e-mail]
PREPARATION
*Beforebeginningassemblyof product,make sure all parts arepresent.Comparepartswith packagecontentslist
and hardware contents list.
*Ifanypartis missingor damaged,do notattemptto assemble the product.
*Estimated AssemblyTime:20 minutes.
*Toolsrequiredfor Assembly(included):AllenKey
CARE AND MAINTENANCE
Alwaysuse feltpadsunder all articlesto preventdiscolorationor softeningof the lacquer.Plasticand rubber bases
onitems candiscolorwood.Wipe up spillsimmediatelyand avoidcommonhazards such as hotdishes,harsh
solvents andabrasives.Cleaningshouldbe donewithasoftlintfreecottonclothdampened wihtwateror furniture
polish.
On highlyused surfaces we recommend applying aquality paste waxwhichshould be used on a regularbasis to
provideadditional protection fromscratches and spills. Howoften youapplythewaxdepends on howmuchwear
thefurniturereceives.
Weight Capacity : 110 LBS
Warning : Do not stand on table
Warning : Do not over torque bolts
Item # COF7010
Product Dimension: 43.3Wx23.6Dx15.7H”
Part List and Hardware List

Step 1: Carefully place the Table top(A) face
down on a clean, non-marring surface, place
Leg frame(B) into the hole of table tops in
turn as picture.
Step 2: Keep Leg frame(B) and Table top(A) at the same
level, align the mounting positions of Leg frame(B) and
Table top(A), attach them by using Hex bolt(HW1) and Flat
washers(HW2) as picture.
Stpe 3: Repeat Step 2. Then tighten all Hex bolt(HW1) by
Allen key(HW3) in a sequential manner.
Your table is ready for use.
PREPARATION
*Beforebeginningassembly of product, make sureall parts are present.Compareparts with package contents listand hardware contents list.
*Ifanypartis missingor damaged,do notattemptto assemble the product.
*Estimated AssemblyTime:20 minutes.
*Toolsrequiredfor Assembly(included):AllenKey
*Ifyou arehavingdifficulty,our friendlyCustomerCareteamis alwayshere to [e-mail]
Hardware is located inside the box. You can find them placed near the sign ‘HARDWARE INSIDE’