Safavieh Furniture MED2200 User manual

Weight Capacity: 50 lbs.
Warning:Do not stand on TV Stand.
Warning:Do not over torque bolts.
!WARNING !
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before
you begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
PREPARATION
CARE AND MAINTENANCE
Dust regularly with a soft, dry cloth. Never use oiled or treated cloths on lacquered finishes.
Some finishes can be wiped with a damp (not wet) cloth, followed at once by rubbing with
a dry cloth to remove fingerprints and smudges. For persistent spots, gently clean with
a soft cloth and a solution of water and mild soap, make sure to wipe dry. Use adhesive felt
pads, coasters and placemats to protect your furniture.
PIECE DESCRIPTION QUANTITY
A
B
C
D
E
F
G
1X HW1
HW2
HW3
HW4
1X
HW5
HW6
HW7
HW8
1X
1X
5X
1X
Model# MED2200
Product Dimensions: 53.1"W x 15.7"D x 29.5"H
Part List and Hardware List
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 40 minutes.
* Tools Required for Assembly : Allen Key,Screwdriver,Wooden hammer.
H
I
J
2X
2X
1X
1X
PICTURE
PIECE DESCRIPTION QUANTITY
6X
8X
12X
6X
4X
4X
24X
2X
2X
8X
8X
20X
6X
PICTURE
HW9
HW10
HW11
HW12
HW13
2X
4X
2X
HW14
HW15
HW16
+
Top Panel
Bottom Panel
Side Panel Left
Middle Panel
Side Panel Right
Back Panel
Shelf
Leg
Left Door
Right Door
Cambolt M6 x 45 mm
Camlock
Dowel
Screw M5 x 45 mm
Screw M5 x 14 mm
Wedge
Screw M3.5 x 18 mm
Bolt
Door Holder
Door Wheel
Screw M4 x 14 mm
Screw M4 x 12 mm
Screw M4 x 40 mm
Cloth Strap
Washer
Plastic Screw Anchor

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 40 minutes.
* Tools Required for Assembly : Allen Key,Screwdriver,Wooden hammer.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
x6
A
1
x6
x6
A
D
E
C
2
3
STEP1:Install HW on part . STEP :Insert HW in part ,insert HW in part , , ,2 1 A
A 23 C D E
C D E A2

STEP3:Insert part in the frame of part , , , . STEP4:Insert HW in part , , , use HW to install part on , , .
F
F
x6
x6
4
3
B
F A C D E 3 C D E 4 B C D E

STEP5:Use HW to install part on . STEP6:Insert HW in the gap behind part , use HW to install HW .
x20
B
H
H
H
H
H
5
X8
67
12
15
14
5 H B
6
12 15
F 7
14 A
6

G
G
STEP7:Install HW on part , , . STEP8:Use HW to install HW , on part , .
x8
8
Put part on HW .
8 C D E
G 8
11 9 10 I J
x12
x2
x2
x12
x2
x2
I
J
9
10
11
11
10
9

STEP9:Push down the middle button of HW , install part between part and ,
Push up the middle button of HW , use screwdriver to fasten the screw at the middle of part .
9 J A B
109
+
J

STEP10:Push down the middle button of HW , install part between part and ,
Push up the middle button of HW , use screwdriver to fasten the screw at the middle of part .
9 A B
109
I
+
I

STEP11:Test the sliding function of part , . STEP12:Drill a hole on wall, insert HW in the hole,
13
15
16
I J
Use HW , to install the another end of HW on wall.
16
13 15 14