Safavieh Outdoor Carson PAT7005C User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
H1
H2
H3
H4
H5
Seat Frame
Leg Frame
Cross bar of leg
Allen bolt L
Allen bolt L
Back frame
Screw -1
Screw -2
Allen key
Horizontal spread
1X
2X
1X
1X
3X
2X
5X
2X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7005
Product Dimensions:50.39" W x 23.62" D x 30.31" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
6x70mm
6x50mm
6x60mm
6x35mm

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12 3
E
E
E
Attach seat frame (A) to cross bar of leg (D),
use screws (E) and tighten with allen key
Ensure seat frame (A) is positioned on top of
cross bar(D).
(H4).
Step 1
Connect back frame (A) with seat frame (C)
as arrow direction.
Step 2 Attach leg frame (B) to back frame (A),use allen
bolts (H2),tighten with allen key(H4).
Attach leg frame (B) to seat frame (C),use allen
bolts (H1) & horizontal spread (H3),tighten
with allen key (H4).
Step 3
A
D
D
A
C
H5
C
A
D
B
B
H1
H2
H2
H2
H2
H1
H3
H3

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
H1
H2
H3
H4
Seat Frame
Leg Frame
Cross bar of leg
Allen bolt L
Allen bolt L
Back frame
Screw
Allen key
Horizontal spread
1X
2X
1X
1X
2X
2X
5X
2X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7005
Product Dimensions:24" W x 23.62" D x 30.31" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
6x60mm
6x50mm
6x60mm

Attach seat frame (C) to cross bar of leg (D),
use screws (E) and tighten with allen key (H4).
Connect back frame (A) with seat frame (C)
as arrow direction.
Attach leg frame (B) to back frame (A),use allen
bolts (H2),tighten with allen key(H4).
Attach leg frame (B) to seat frame (C),use allen
bolts (H1) & horizontal spread (H3),tighten
with allen key (H4).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12 3
Step 1 Step 2 Step 3
E
E
A
D
C
A
D
H1
H2
H2
H1
H2
H2
H3
H3
A
C

6x60mm
8x60mm
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
F
H1
H2
H3
Top Frame table
Short frame
Log frame
Leg
Butter
Allen bolt L2
Allen bolt L1
Washer
Allen key
1X
2X
2X
4X
4X
12X
4X
1X
4X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7005
Product Dimensions:19.68" W x 31.39" D x 15.75" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.

Attach B,C,D the arrow
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1
Step 1
Attach B,C,D to A and using H1 tighten with
allen key H3.
Step 2
Attach E to A and using F tighten with
allen key H3.
Step 3
B
H1 H1
H1
H3
H1
H1 H1
H1
H1 H1
H1
H1
H1
H1
E
E
E
E
F
F
F
F
H2
H2
H2
H2
C
B
CA
A
D
D