Safavieh Outdoor Ruben PAT6753 User manual

MODEL PAT# 6753
Product Dimension: 45.28”W x 24.8”D x 34.61”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench
Weight capacity : 600 lbs
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
Seat
Right side
Left side
Joint bar
Allen bolt
Allen screw
Wrench
Allen Key
M6x35
M6x70
1x
1x
8x
4x
1x
1x
A
B
C
D
F1
1x
1x
E
Back
2x
F2
F3
F4

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and Wrench.
PREPARATION
Step 1: attach the right side (B) to the seat (A) and the joint bar (E)
as shown on the picture. Then use the Allen screw (F1) to tighten
all points by using the Allen Key ( F3).
Step 2: repeat same with the left side (C) as shown on the picture.

Step 3: attach the back (D) to the side as shown on the picture use the
Allen bolt (F2) . Tighten by the Allen Key (F3) and wrench (F4) as shown
on the picture. Make sure to put correct position hardware each position.
This step show this bench can use the back (D) same table .
Step 4: When turning the back side (D),as shown on the picture,
make sure to lock the back (D) on the left side (C).
C
B
D