Safavieh Outdoor Sophie PAT5001A User manual

CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch
the surface. Wipe the surface with a soft, damp cloth
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening Model#PAT5001A-BENCH
Part List and Hardware List Product Dimensions:45.25"W x22 " D x38.5" H
PIECE DESCRIPTION PICTURE QUANTITY
ASEAT WITH BACK 1x
BLEFT LEG 1x
CRIGHT LEG 1x
DBOTTOM BAR 1x
ENUTS 6x
FSCREWS 2x
GSPANNER 1x

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included):SPANNER.
Nuts has been kept on product itself, two spare nuts can found in hardware bag
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
step1 step2
Attach the left leg (B) and the right leg (C) to the seat with
back (A) using the nuts and spanner provided. Connect the bottom bar (D) to the left leg (B) and the
right leg (C), using screws and spanner provided.

CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch
the surface. Wipe the surface with a soft, damp cloth
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening Model#PAT5001A-CHAIR
Part List and Hardware List Product Dimensions:24"W x 22" D x38.5" H
PIECE DESCRIPTION PICTURE QUANTITY
ASEAT WITH BACK 1x
BLEFT LEG 1x
CRIGHT LEG 1x
DBOTTOM BAR 1x
ENUTS 6x
FSCREWS 2x
GSPANNER 1x

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included):SPANNER.
Nuts has been kept on product itself, two spare nuts can found in hardware bag
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
step1 step2
Attach the left leg (B) and the right leg (C) to the seat with
back (A) using the nuts and spanner provided. Connect the bottom bar (D) to the left leg (B) and the
right leg (C),using screws and spanner provided.

CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch
the surface. Wipe the surface with a soft, damp cloth.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model#PAT5001A-TABLE
Part List and Hardware List
Product Dimensions:39.25"W x 23.5" D x 21.75" H
PIECE DESCRIPTION PICTURE QUANTITY
A TABLE TOP 1X
B LEGS 2X
C BOTTOM FRAME 1X
D FASTENING NUT 8X
E SPANNER 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): SPANNER
Nuts has been kept on product itself, two spare nuts can found in hardware bag.
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
Step 1 Step 2
Attach the frame (C) to the legs (B) using the nuts provided. Put the table top (A) upside down, insert the legs (B)
into the screws on the table top, fasten the nuts with
spanner provided.