Safavieh Outdoor Monico PAT9036 User manual

*Please make sure that you have all parts indicated and they are in good condion before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so surface to prevent scratching the finish during
assembly.
*This item may require periodic ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]
*Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*If any part is missing or damaged, do not aempet to assemble the product.
*Esmated Assembly Time: 30minutes.
*Tools Required for Assembly (included): Allen Key
NOTICE
PREPARATION
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from
standing water. Dust regularly with small brush or vacuum. Spills should be taken care of
immediately before they harden or stain with a slightly dampened sponge.
PIECE QUANTITY
DESCRIPTION PICTURE
A
B
C
HW1
1
1
4
2
8
Table Top
Table Leg
Connector
Bolt M6*40
HW2 Allen Key
Part List and Hardware List
ITEM NO.:PAT9036
Product Dimensions:
Chair: 23 56"x26 .67"x40"
Table: Dia35 56'x31.11"
Weight Capacity:
Chair:220LBS
Table:110LBS
Warning: Do not stand on the table
Warning: Do not over torque bolts

*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
*Esmated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
*Gradually ghten bolts in a star paern: ghten one bolt and then the one opposite from it unl all bolts are ghtened.
PREPARATION
STEP2:STEP1:
STEP3:
Follow the step 1 to assemble all the legs to the table top
Assemble the Connector (C) between the legs, using bolt(HW1)
and Allen key (HW2)
Assemble the table leg(B) to the table top(A),using bolt(HW1)
and Allen key(HW2).