Safavieh Outdoor PAT7050 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
Seat Frame
Leg Frame
Back frame
Screw
Allen key
2X
1X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT7050
Product Dimensions:29.92" W x 48.82" D x 30.71" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
Screw
F
G
H
I
K
Cross Bar
Cushion Seat
Cushion Back
Bolt
M6x60
M6x80
M6X35
1X
1X
2X
2X
2X
6X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1 Step 2
H
G
G
B
C
H
DA
A
Attach leg frame (A) to cross bar (D) ,use screws (G),tighten with allen
key (K).
Tighten screws (H) with allen key (K) to attach seat frame (C) and
back frame (B).
G,H,I
K
G,H,I
K

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3 Step 4
K
K
B
A
A
B
C
D
I
A
A
D
B
C
A
A
C
B
Attach leg frame (A) to back frame (B) and seat frame ,use Bolt (I),
tighten with allen key(K).
I
Tighten Bolt (I) with allen key (K) to attach seat frame (C) and
Leg frame (A).
G,H,I
K
G,H,I
K

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
56
Step 5
E
F
F
Attach Ensure all screws are fully locked into position.
Place Seat Cushion (E), Back Cushion (F) into the Chair.
The Chair is ready to be used.
Step 6 Caution: This Chair can only be used on a flat, level surface

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
Seat Frame
Leg Frame
Back frame
Screw
Allen key
2X
1X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT7050A
Product Dimensions:26.27" W x 29.92" D x 30.71" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
Screw
F
G
H
I
K
Cross Bar
Cushion Seat
Cushion Back
Bolt
M6x60
M6x80
M6X35
1X
1X
1X
2X
2X
6X
chair

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg frame (A) to cross bar (D) ,use screws (G),tighten with allen
key (K).
Tighten screws (H) with allen key (K) to attach seat frame (C) and
back frame (B).
Step 2
G
G
A
A
D
B
C
H
H
G,H,I
K
G,H,I
K

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Attach leg frame (A) to back frame (B) and seat frame ,use Bolt (I),
tighten with allen key(K).
Tighten Bolt (I) with allen key (K) to attach seat frame (C) and
Leg frame (A).
Step 4
B
A
A
C
D
K
K
B
B
A
A
C
I
A
A
C
B
D
I
G,H,I
K
G,H,I
K

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
56
Step 5 Attach Ensure all screws are fully locked into position.
Place Seat Cushion (E), Back Cushion (F) into the Chair.
The Chair is ready to be used.
Step 6 Caution: This Chair can only be used on a flat, level surface
E
F

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
EAllen key
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT7050A
Product Dimensions: 23.62" W x 39.37" D x 14.57" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
8.5x20x2mm
M8x60 mm
Frame Table
Leg Table
Bolt
Washer
1X
4X
8X
8X
1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1 2
Step 1
Complete.
Step 2
D
C
E
B
B
B
B
A
Place the Table top (A) with its underside skywards onto a clean,
soft surface to avoid any scratch or damage to the product.
Ax loosely the Legs (B) into the mounting position at the corners of the
Table Top (A), using the Bolts (C) with Flat Washers (D), with the Allen Key(E),
as shown in the picture.
1 2