Safavieh Outdoor PAT 6721 User manual

MODEL : PAT 6721
Product Dimension :24.41”W x24.41”D x34.65”H
Please make sure that you have all parts indicated
before you begin assembly of this item
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use .
Dust regularly with small brush or vacuum .Spills should be taken care of
immediately before they harden or stain with a slightly dampened sponge
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
Support 1
Back
Seat
Right side
Left side
Suport 2
Allen Bolt
Screw
Bolt extra
Allen Key
M4x35
M6x50
M6x70
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the chair
Weight capacity : 300 lbs

Before beginning the assembly of the product , make sure all parts are present .
Compare the parts with package contents list and hardware contents list .
If any parts are missing or damaged,do not attempt to assemble the product .
Tool required for assembly ( included ) : Allen key
12
Step 1: attach left side (E) to back (B) with support 1 (A) and
support 2 (F) as shown on picture,using bolt (H1) and tighten
with the Allen key (H4) .
Then continue with left side ( E ) with same way .
Make sure tighten all bolt (H1 ) before continue step 2
Step 2: put the seat (D) inside chair and using screw (H2)
as shown on picture,tighten with screwdriver.

PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
MODEL# PAT6721
Product Dimension: 35.43”W x 35.43”D x 29.53”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
Table top
Wrench
NOTICE
Leg
Lid
D
Warning : Do not torque bolts / screws
Warning : Do not stand on the table
Weight capacity : 40 lbs.

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Wrench.
Step 1: turn the table top (A). Then attach the 4 legs (B) as
shown on the picture.
PREPARATION
Step 2: use the wrench (C) to tighten all bolts as shown
on the picture.
2
1
D