Safavieh Outdoor FOX6007 User manual

Model# FOX6007
Product Dimensions:24.4" W x 24.8" D x 33.5"H
220
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refer to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
* Before beginnning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
WARNING
A
B
C Back Frame
Seat Frame
Leg frame
1X
2X
1X
PIECE DESCRIPTION PICTURE QUANTITY
D
HW1
Cross bar of leg 2X
6X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
HW4
Allen key 4
Reinforcement plate
4X
2X
2X
HW5
HW6
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE
HW2 Screw: M4 x0.5 x20 mm
Allen Bolt: M8x0.5x75 mm
4X
4X
HW3
Sleeve nut: M8 x0.5x15mm
Screw: M7 x0.5 x90 mm
Allen key 5 1X
HW7
Screw driver 1X
HW8 Not Provied
CSH1Seat cushion 1X

2
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
1
Step 2
Attach Seat (A) to Back (C), taken Screw (HW1) to Reinforcement plate
(HW5) & Seat (A), using allen key ( HW7) to tighten(HW1).
Using (HW2) attach (HW5) & (C),using (HW8) to tighten (HW2).
HW1
HW1
HW1
HW1
B
D
D
B
C
A
HW2
HW2
HW1 HW5
HW5
HW1
Step 1
Attach leg frame (B) to bar (D), Screw (HW1), tighten with
allen key (HW7)

4
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
Step 4
Put Seat Cushion (CSH1) on the Chair. The Chair is ready to be used
Step 3
(C) & (A) attached to legs frame (B). Using bolt (HW3) and sleeve nut (HW4)
tighten by (HW6).
HW3
HW3
HW3
C
B
B
HW3
HW3
HW4
A
HW4
CSH1

Model# FOX6007
Product Dimensions:46.1" W x 24.8" D x 33.5"H
400
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refer to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
* Before beginnning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
WARNING
A
B
C Back Frame
Seat Frame
Leg frame
1X
2X
1X
PIECE DESCRIPTION PICTURE QUANTITY
D
HW1
Cross bar of leg 2X
6X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
HW4
Allen key 4
Reinforcement plate
4X
4X
3X
HW5
HW6
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE
HW2
Screw: M4 x0.5 x20 mm
Allen Bolt: M8x0.5x75 mm
1X
6X
HW3
Sleeve nut: M8 x0.5x15mm
Screw: M7 x0.5 x90 mm
Allen key 5
2X
HW7
1X
HW8
Screw driver 1X
HW9Not Provied
Screw: M7 x0.5 x70 mm
CSH1Seat cushion 1X

2
PREPARATION


 
 
 
1
Step 2
Attach Seat (A) to Back (C), taken Screw (HW1) & (HW2) to
Reinforcement plate (HW6) & Seat (A), using allen key ( HW8) to
tighten(HW1) & (HW2).
Using (HW3) attach (HW6) & (C),using (HW9) to tighten (HW3).
Step 1
Attach leg frame (B) to bar (D), Screw (HW1), tighten with
allen key (HW8)
HW1
HW1
HW1
HW1
B
B
D
D
A
C
HW1 HW6
HW6
HW3 HW3
HW3
HW6
HW2 HW1

4
PREPARATION


 
 
 
3
Step 4
Put Seat Cushion (CSH1) on the Chair. The Chair is ready to be used
Step 3
(C)C) & (A) attached to legs frame. Using bolt (HW4) and sleeve nut (HW5)
tighten by (HW7).
HW4
HW4
HW4
HW4
B
HW4
C
BA
HW5
HW5
CSH1

Model# FOX6007
Product Dimensions:23.6" W x 39.4" D x 17.7" H
40
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refef to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
WARNING
A
B
HW1
HW2
HW3
Top table
Cross bar of leg
Allen key 4
1X
2X
4X
8X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Screw: M7 x0.5 x90 mm
* Before beginnning assembly of product, make sure all parts are present. Compare parts
with part contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
table
Frame leg
1X
C
Screw: M6 x0.5 x30 mm
Part List and Hardware List
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE

PREPPREPARAARATIONTION
1
**BeBefforore beginning assembly of pre beginning assembly of product, makoduct, make sure sure all parts are all parts are pre presenesent. Compart. Compare parts with packe parts with packagage ce cononttenents lists list and hart and hardwdwarare ce cononttenents lists list.t.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
2
HW1
B
B
AAHW2
Step 1
Attach front leg (B) to bar (A), using Allen bolt
(HW1), tighten with allen key (HW3)
Step 2
Using Screw (HW2) to attach to Table top
then tighten by allen key (HW3)
HW1
HW1
HW1
HW2
B
B

PREPPREPARAARATIONTION
1
**BeBefforore beginning assembly of pre beginning assembly of product, makoduct, make sure sure all parts are all parts are pre presenesent. Compart. Compare parts with packe parts with packagage ce cononttenents lists list and hart and hardwdwarare ce cononttenents lists list.t.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
2
Step 4
Caution: This Table can only be used on a flat, level surface.
B
C
A
HW2
HW2
Step 3
Attach cross bar (C) to frame leg (B), using
screw (HW2) to tighten by allen key (HW3).
B