Safavieh Outdoor Madalina PAT7509-1 User manual

begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so surace to prevent scratching the finish during
assembly.
*This item may require periodic ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged,do not atempt to assemble the product.
*Esmated Assembly Time: 10 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
WARNING
Store outdoor furniture on indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or stain with
a slightly damped sponge.
NOTICE
*Please make sure that you have all parts indicated and they are in good condion before you
Model# PAT7509 - 1/2
Product Dimensions:
26.77”x26.77x26.38”H (Corner Chair)
26.77”x51.57x26.38”H (Corner Bench)
26.77”x26.77x14.57”H (Stool)
26.77”x26.77x14.57”H (Table)
1
Weight capacity : 275 Lbs (single seat)
550 Lbs (two person seat)
Warning : Do not stand on Chair/bench/stool/table
Warning : Do not over torque bolts/screws

CARE AND MAINTENANCE
Insert Care and Maintenance here
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
D
E
CSH1
CSH2
F
G
H
I
J
CSH3
CSH4
HW1
HW2
HW3
HW4
HW5
HW6
Bench le frame
Bench back frame
Bench seat frame
Bench front frame
Bench right frame
Bench seat cushion
Bench back cushion
Corner right frame
Corner back frame
Corner seat frame
Corner front frame
Corner le frame
Corner seat cushion
Corner beak cushion
Allen bolt(M6x30 mm)
Allen bolt(M6x40 mm)
Plasc feet 1
Flat washer
Allen key
Plasc feet 2
2
HW7
Connection clip

CARE AND MAINTENANCE
Part List and Hardware List
A
B
C
D
E
CSH1
CSH2
HW1
HW2
HW3
HW4
Bench le frame
Bench back frame
Bench seat frame
Bench front frame
Bench right frame
Bench seat cushion
Bench back cushion
Allen bolt(M6x30 mm)
Allen bolt(M6x40 mm)
Plasc feet 1
Flat washer
Allen key
Plasc feet 2
3
HW5
HW6
Insert Care and Maintenance here

2
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
1
B
C
HW2
HW2
HW4
HW4 A
HW2
HW2
HW4
HW4
STEP 1
CONNECT BENCH BACK FRAME (B) & BENCH SEAT FRAME (C) & TIGHTEN
BOLT (HW2) WITH ALLEN KEY (HW5)
STEP 2
CONNECT PART FROM STEP 1 & LEFT FRAME (A) TIGHTEN BOLT (HW2)
WITH ALLEN KEY (HW5)
4

4
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
E
HW1
HW1
HW4
HW4
D
HW1
HW1
HW1
HW1
HW1 HW4
HW4
HW4
HW4
HW4
5
STEP 3
CONNECT PART FROM STEP 2 & FROM RIGHT FRAME (E) TIGHTEN BOLT (HW1)
WITH ALLEN KEY (HW5)
STEP 4
CONNECT PART FROM STEP 3 & BENCH FRONT FRAME (D) TIGHTEN
BOLT (HW1) WITH ALLEN KEY (HW5)

6
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
5
CSH1
HW1 HW1
HW1
HW1
HW3
HW3
HW3
HW3
HW1 HW1
HW6
CSH1
CSH2
STEP 5
CONNECT PART FROM STEP 4 & PLASTIC FEET 1 (HW3),PLASTIC FEET 2 (HW6)
TIGHTEN BOLT (HW1) WITH ALLEN KEY (HW5)
STEP 6
PUTON BECH CUSHION (CSH1) & BENCH BACK CUSHION (CSH2) TO
COMPLETE BENCH
6

CARE AND MAINTENANCE
Insert Care and Maintenance here
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION
Flat washer
Allen key
Corner right frame
Corner back frame
Corner seat frame
Corner front frame
Front le frame
Corner seat cushion
Corner back cushion
PICTURE
1X
1X
1X
1X
1X
1X
1X
15X
6X
4X
13X
1X
F
G
H
I
J
CSH3
CSH4
HW1
HW2
HW3
HW4
HW5
Plasc feet 1
Allen bolt(M6x30 mm)
Allen bolt(M6x40 mm)
7

2
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
1
HW4
F
H
HW2
G
HW2
HW2
HW2
HW4
HW4
STEP 1
CONNECT CORNER RIGHT FRAME (F) & CORNER SEAT FRAME (H) & TIGHTEN
BOLT (HW2) WITH ALLEN KEY (HW5)
STEP 2
CONNECT PART FROM STEP 1 & CORNER BACK FRAME (G) TIGHTEN
BOLT (HW2) WITH ALLEN KEY (HW5)
8

4
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
I
J
HW4
HW1
HW4
HW1
HW4
HW4
STEP 3
CONNECT PART FROM STEP 2 & CORNER FRONT FRAME (I) TIGHTEN
BOLT (HW1) WITH ALLEN KEY (HW5)
STEP 4
CONNECT PART FROM STEP 3 & FRONT LEFT FRAME (J) TIGHTEN BOLT (HW1)
WITH ALLEN KEY (HW5)
9

6
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
5
HW1
HW1
HW1
HW1
HW3
HW3
HW3
10
STEP 5
CONNECT PART FROM STEP 4 & PLASTIC FEET 1 (HW3) TIGHTEN
BOLT (HW1) WITH ALLEN KEY (HW5)
STEP 6
HW7

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
78
STEP 7STEP 8
11

begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so surace to prevent scratching the finish during
assembly.
*This item may require periodic ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged,do not atempt to assemble the product.
*Esmated Assembly Time: 10 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
WARNING
Store outdoor furniture on indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or stain with
a slightly damped sponge.
NOTICE
*Please make sure that you have all parts indicated and they are in good condion before you
Model# PAT7509 - 2/2
Product Dimensions:
26.77”x26.77x26.38”H (Corner Chair)
26.77”x51.57x26.38”H (Corner Bench)
26.77”x26.77x14.57”H (Stool)
26.77”x26.77x14.57”H (Table)
1
Weight capacity : 275 Lbs (single seat)
550 Lbs (two person seat)
Warning : Do not stand on Chair/bench/stool/table
Warning : Do not over torque bolts/screws

CARE AND MAINTENANCE
Insert Care and Maintenance here
Part List and Hardware List
Stool/Table front &rear frame
Stool top frame
Stool cushion
Stool/Table side frame
Table top frame
Table glass
QUANTITY
PIECE
2X
DESCRIPTION
Allen key
PICTURE
K
L
M
CSH5
N
P
HW1
HW3
HW4
HW5
Allen bolt(M6x30 mm)
Plasc feet 1
Flat washer
2X
1X
1X
1X
1X
40X
8X
24X
2X
2
HW7
Connection clip

CARE AND MAINTENANCE
Insert Care and Maintenance here
Part List and Hardware List
Table side frame
Table front & rear frame
Table top frame
Table glass
QUANTITY
PIECE DESCRIPTION
Allen key
PICTURE
2X
2X
1X
1X
20X
4X
12X
1X
N
P
HW1
HW3
HW4
HW5
K
L
Flat washer
Allen bolt(M6x30 mm)
Plasc feet 1
Model# PAT7509 - 2/2
Product Dimensions:
26.77”x26.77x14.57”H (Table)
3

2
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
1
K
N
K
L
L
STEP 1
CONNECT TABLE SIDE FRAME (K) & TABLE TOP FRAME (N) & TIGHTEN
BOLT (HW1) WITH ALLEN KEY (HW5)
STEP 2
CONNECT PART FROM STEP 1 & TABLE FRONT & REAR FRAME (L)
TIGHTEN BOLT (HW1) WITH ALLEN KEY (HW5)
HW1
HW1
HW4
HW4
HW4
HW1
HW1
HW4
HW4
HW4
HW4
HW4
HW4
4

4
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
P
STEP 4
PUTON TABLE GLASS (P) TO COMPLETE TABLE
STEP 3
CONNECT PART FROM STEP 2 & PLASTIC FEET 1 (HW3) TIGHTEN BOLT (HW1) WITH
ALLEN KEY (HW5)
HW1
HW1
HW1
HW1
HW3
HW3
HW3
HW3
5

CARE AND MAINTENANCE
Insert Care and Maintenance here
Part List and Hardware List
Stool front & rear frame
Stool top frame
Stool cushion
Stool side frame
QUANTITY
PIECE
2X
DESCRIPTION
Allen key
PICTURE
1X
1X
20X
4X
12X
1X
K
L
M
CSH5
HW1
HW3
HW4
HW5
2X
Plasc feet 1
Flat washer
Allen bolt(M6x30 mm)
Model# PAT7509 - 2/2
Product Dimensions:
26.77”x26.77x14.57”H (Stool)
6

4
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
7
L
L
STEP 1
CONNECT STOOL SIDE FRAME (K) & STOOL TOP FRAME (M) & TIGHTEN
BOLT (HW1) WITH ALLEN KEY (HW5)
STEP 2
CONNECT PART FROM STEP 1 & STOOL FRONT & REAR FRAME (L)
TIGHTEN BOLT (HW1) WITH ALLEN KEY (HW5)
K
K
M
HW1
HW1
HW4
HW4
HW4
HW1
HW1
HW1
HW1
HW4
HW4
HW4
HW4
HW4

4
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
8
STEP 4
PUTON STOOL CUSHION (CSH5) TO COMPLETE STOOL
STEP 3
CONNECT PART FROM STEP 2 & PLASTIC FEET 1 (HW3) TIGHTEN BOLT
(HW1) WITHALLEN KEY (HW5)
HW1
HW1
HW1
HW1
HW3
HW3
HW3
HW3
HW7

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not atempt to assemble the product.
*Esmated Assembly Time : 10 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
9
5 6
STEP 5STEP 6
PUTON STOOL CUSHION (CSH5) TO COMPLETE STOOL