Safavieh Outdoor PAT7008 User manual

Model# PAT7008
Product Dimensions:23.2" W x 26.4" D x 32.5"H
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refer to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
* Before beginnning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
Part List and Hardware List
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE
A
B
C
Leg Frame
Back Frame
Seat frame
2X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
220
WARNING
Allen key 4
HW1 Screw: M6 x0.5 x80 mm 2X
HW2 Screw: M6 x0.5 x60 mm 6X
1X
HW3
PIECE DESCRIPTION PICTURE QUANTITY
CSH1 Seat Cushion 1X
CSH2 1X
Back Cushion

2
PREPARATION


 
 
 
1
Step 1
Attach leg frame (A) to back frame (C) ,use screws (HW1), tighten
with allen key (HW3). Use screw (HW2) to connect leg frame (A)
with seat frame (B), tighten with allen key (HW3).
Step 2
Tighten screw (HW2) with allen key (HW3) to attach back frame(C).
Complete.
HW1
HW2
HW2
HW1
HW2
HW2
A
A
C
B
HW2
HW2
C

3
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
StepStep 3
Put Seat Cushion (CSH1) and Back Cushion (CSH2) on the Chair.
The Chair is ready to be used
CSH2
CSH1