Safavieh Outdoor PAT9016 User manual

PIECE QUANTITY
*
Part List and Hardware List
PREPARATION
NOTICE
DESCRIPTION PICTURE
*Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]
A
B
C
D
E
Front Chair leg
Cushion
Table Top
2
4
4
2
1
32
*Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*If any part is missing or damaged, do not attempet to assemble the product.
*EstimatedAssemblyTime:30minutes.
ToolsRequiredforAssembly(included):AllenKey
HW1
HW2
Allen Key 1
HW3
Hexagon Socket Screw
6x0.5x150mm
Flat Washer 6mm
Chair
32
Rear Chair leg
CARE AND MAINTENANCE
*Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from
standing water. Dust regularly with small brush or vacuum. Spills should be taken care of
immediately before they harden or stain with a slightly dampened sponge.
F
G
Table Glass
Table Leg
1
4
ITEM NO.:PAT9016
ProductDimensions:
Chair: W30.7''*D34.3''*H33.1''
Cofee Table: ￠23.6*H18.5''

*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
*Gradually tighten bolts in a star pattern: tighten one bolt and then the one opposite from it until all bolts are tightened.
PREPARATION
STEP2:
STEP1:
Assemble the chair leg(B&C) to the chair(A),
using bolt and washer(HW1&HW2) and Allen key(HW3).
STEP3:
HW3
HW1
HW2
HW3
HW1
HW2
Put the table cushion(D) to the chair.
STEP4:
Put the table glass(F) to the table top.
Assemble the table leg(G) to the table top(E),
using bolt and washer(HW1&HW2) and Allen key(HW3).
BB
CC
A
D
G
G
G
G
E
F