Safavieh Outdoor Hikaru PAT7083 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
G
F
Cross bar
Corner block
Top table
Leg frame
Screw
1X
2X
1X
4X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7083
Product Dimensions:35.4" W x 78.7" D x 29.9" H
4 mm
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Screw M6 x 45
M6 x 60
Allen key
2X
12X
2X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 2
Attached Cross bar (C) to Leg frame (B).
Using Screw (E) tighten with Allen key (G)
G
EF
G
Attached the Leg frame (B) and Corner block (D) to the
Top table (A). Using Screw (F) tighten with Allen key (G)
Step 1

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
34
Caution: This table can only be used on a flat, level surface
Step 3
Unlock. Drag the wings to the sides and then open a
wing in of the middle wing of the table. After push the
side wing to the middle wing and lock.
Step 4

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Model# PAT7083
Product Dimensions:18.5" W x 24.4" D x 36.6" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
chair

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
123
Step 2 Step 3
Step 1

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Model# PAT7083
Product Dimensions:20.5" W x 24.4" D x 36.6" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
chair

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
123
Step 2 Step 3
Step 1