Safavieh Outdoor PAT7076 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
Cross bar
Leg frame
Seat frame
Screw
1X
2X
1X
6X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7076
Product Dimensions:23.6" W x 16.1" D x 13.9" H
4 mm
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
M6X 55
Allen key 2X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 2
Attached Frame leg (B) and Apron bar
(C) to Seat fame (A). Using Screw (D)
tighten with Allen key (E)
Caution: This Chair can only be used on a flat, level surface
Step 1
D
E

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
G
F
H
Left leg frame
Cross bar
Seat frame
Back frame
Right leg frame
Screw
1X
1X
1X
1X
2X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7076
Product Dimensions:26,4" W x 35.4" D x 33.1" H
4 mm
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Bolt M6X55
M6X 90
Allen key
1X
4X
4X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 2
Attached Back frame (A) to Seat frame (B).
Using Screw (F) tighten with Allen key (H)
H
FF
H
G
Attached Right leg frame (C) to the Croos bar (E), the Back
frame (A) and Seat frame (B). Using Screw (F) and Bolt (G)
tighten with Allen key (H)
Step 1

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
34
Caution: This Chair can only be used on a flat, level surface
F
H
G
Step 3
Attached Right leg frame (D) to the Croos bar (E), the
Back frame (A) and the Seat frame (B). Using Screw (F)
and Bolt (G) tighten with Allen key (H)
Step 4

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
F
Cross bar
Leg frame
top table
Apron bar
Screw
1X
2X
2X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7076
Product Dimensions:21.6" W x 21.6" D x 14.9" H
4 mm
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
M6X 55
Allen key
10X
2X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 2
Attached Apron bar (C) to Top table (A).
Using Screw (E) tighten with Allen key (F)
E
F
Attached Leg frame (B) and the Croos bar (D) to the Top
table (A). Using Screw (E) tighten with Allen key (F)
Step 1
E
F