Safavieh Outdoor Kinnell PAT-7311 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
Seat Frame
Leg Frame
Back frame
Screws
Allen key
1X
2X
1X
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT-7311
Product Dimensions:48.82" W x 25.59" D x 25.59" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
E
F
G
H
I
Cushion Seat
Cushion Back
Bolts
M6x80
M6X40
2X
1X
1X
2X
4X
5X
chair
488
Extra seat leg

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach Leg Frame (B) to Seat Frame (C) ,use screws (G),tighten with allen
key (I).
Tighten bolts (H) with allen key (I) to attach Leg Frame (B) and
back frame (A)
Step 2
G
G
G
G
B
B
C
A
B
BC
A
B
B
C
I
H

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Adjust height for balance Adjust low for balance
H
B
B
C
A
D
Step 4
Adjust Pre-installed Levellers height for balance
Attach leg Extra seat (D) to Seat Frame (C) ,use Bolt (H),tighten with allen
key (I).
I

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 6 Caution: This Chair can only be used on a flat, level surface
Step 5 Attach Ensure all screws are fully locked into position.
Place Seat Cushion (E), Back Cushion (F) into the Chair.
The Chair is ready to be used.
F
E
E
F

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
Table Top
Allen key
1X
4X
8X
1X
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT7311
Product Dimensions: 39.37" W x 23.62" D x 16.93" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
Bolt M6X60
table
44
Table leg
Flat washer 8X
D
E

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg table (B) to Table top (A) ,use Bolts (C) and Washer (D),
tighten with allen
key (E).
B
E
C
B
B
B
Step 2 Caution: This Table can only be used on a flat, level surface
A
D

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
Seat Frame
Leg Frame
Back frame
Screws
Allen key
1X
2X
1X
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT-7311
Product Dimensions:25.98" W x 25.59" D x 25.59" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
E
F
G
H
Cushion Seat
Cushion Back
Bolts
M6x80
M6X40
1X
1X
1X
4X
4X
chair
242

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg frame (B) to Seat Frame (C) ,use screws (F),tighten with allen
key (H).
Tighten bolts (G) with allen key (H) to attach Leg Frame (C) and
back frame (A)
Step 2
B
C
B
F
F
F
F
C
B
A
B
B
B
A
G
H

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
D
E
Step 4 Caution: This Chair can only be used on a flat, level surface
Step 3 Attach Ensure all screws are fully locked into position.
Place Seat Cushion (D), Back Cushion (E) into the Chair.
The Chair is ready to be used.