Safavieh Cullen DTB1001 User manual

Model #: DTB1001
Product Dimensions: 38-69.5” W x 38” D x 30.3”H
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A Top 1X
B Legs 4X
HW1 Socket Bolts 8x1.25x55mm 8X
HW2 Split Lock Washer 8mm 8X
HW3 Flat Washer 8mm 8X
HW4 Allen Key 1X
NOTICE
* Please make sure that you have all parts indicated and they are in good condi on before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so suface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not atempt to assemble the product.
*Es mated Assembly Time: 20 minutes.
*Tools Required for Assembly: Allen Key (included) and screw driver (not included).
CARE AND MAINTENANCE
*Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and
rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards
such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton
cloth dampened with water or furniture polish. On highly used surfaces we recommend applying a
quality paste wax which should be used on a regular basis to provide additional protection from
scratches and spills. How often you apply the wax depends on how much wear the furniture receives.
Weight capacity: 40 LBS
Warning: Do not stand on Table
Warning: Do not over torque bolts
WARNING
! !

STEP1:TAKE OUT LEGS AND HARDWARE. PUT THE WASHERS (HW2. HW3) ON THE
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not atempt to assemble the product.
* Esm ted Assembly Time: .20 minutes
* Tools Required for Assembly: Allen Key (included) and screw driver (not included).
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
B
A
HW4
HW1
HW2
HW3
HW1
HW3
HW2
STEP2: INSERT FOUR LEGS (B) OF THE TABLE. MAKE SURE TO APPLY ALL THE BOLTS
BOLT (HW1) IN THE ORDER SHOWN IN THE PICTURE.INTO THE HOLES PROPERLY BUT DON’T TIGHTEN COMPLETELY.
STEP4: PUT THE TABLE UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL AS
STEP3: ROTATE THE WOOD LOCK AND REMOVE THE 4 SCREWS (JUST FOR
PACKAGING) IN THE ORDER SHOWN IN THE PICTURE. PICTURED ABOVE, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY (HW4).

4
12
LEAF OPENNING EXTENSION INSTRUCTION LEAF OPENNING EXTENSION INSTRUCTION
LEAF OPENNING EXTENSION INSTRUCTION LEAF OPENNING EXTENSION INSTRUCTION
STEP1: DRAG THE LEAF OF THE TABLE OUT STEP2: RAISE THE LEAF OF THE TABLE UPSTEP1: DRAG THE LEAF OF THE TABLE OUT
3
STEP3: PUSH THE LEAF OF THE TABLE IN STEP4: ROTATE THE WOOD LOCK TO LOCK THE LEAF OF THE TABLE

4
3
2
CLOSING LEAF INSTRUCTION
CLOSING LEAF INSTRUCTION
CLOSING LEAF INSTRUCTION
CLOSING LEAF INSTRUCTION
1
STEP1: ROTATE THE WOOD LOCK TO UNLOCK THE LEAF OF THE TABLE STEP2: DRAG THE LEAF OF THE TABLE OUT
STEP3: PUT THE LEAF OF THE TABLE DOWN STEP4: PUSH THE LEAF OF THE TABLE IN