Safavieh BST8507A User manual

PIECE DESCRIPTION QUANTITY PIECE DESCRIPTION QUANTITY
A BACK REST 1X HW1 JCBC BOLT M6 X 50MM 4X
B LEFT LEG FRAME 1X HW2 BARREL NUT M6 X 13MM 4X
CRIGHT LEG FRAME 1X HW3 SCREW M7 X 35MM 6X
D STRETCHER 2X HW4 ALLEN WRENCH M4 1X
HW5 WOOD PLUG 4X
Part List and Hardware List
PICTURE
WARNING: DO NOT ROCK BACK AND FORTH OR SIDE TO SIDE ON CHAIR
CARE AND MAINTENANCE
Adhesive felt pads should always be applied to areas of furniture which make direct contact with flooring, said
application will prevent damage to the furniture and or surfaces on which the furniture lies. Objects placed on
articles of furniture should rest on non abrasive material as to prevent damage to the wood finish. Objects whose
composition consist of plastic and rubber are known to discolor and damage the wood surfaces on which they
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much the furniture
wears.
PICTURE
PRODUCT DIMENSION: 21.65"W X 20.47"L X 41.54"H
MODEL: BST8507A/B/C/D/E/F
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list
and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
WARNING: DO NOT STAND ON CHAIR
Weight Capacity: 225LBS
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of
this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]

STEP 3: Please make sure screws are secured tightly. Insert Wood
Plug (HW5) to cover the hole in Stretcher (C).
Complete
HW4
STEP 1: Insert Barrel Nut (HW2) into holes on Stretcher (C) and
assemble Stretcher (C) using JCBC Bolts (HW1) in line with
Barrel Nut (HW2) and Allen Key (HW4).
STEP 2: Attach the leg frame to the chair seat. Secure it using JCBC
Screw (HW3) Tighten it with Allen key (HW4).
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
HW5 HW5
HW5
HW5
FR
FL
HW2
HW1
HW4
FL
FR
HW4
HW3