Safety 1st WILLOW User manual

20KG0m+
4 WHEEL STROLLER
WILLOW
Suitable for newborn to 20kg (approximately 5 years)
Illustration and designs may vary.

4017327 - Willow 4 Wheel Stroller - 11A/16
Components List
A. Folding Lock
B. Handle
C. Tether Strap
D. Storage Latch
E. Rear Brake
F. Rear Wheels (x2)
G. Shopping Basket
H. Canopy Window
I. Canopy
J. Seat Back
K. Harness Straps
L. Bumper Bar
E
G
D
F
B
A
C
J
I
H
L
M
K
N
O
P
Q
M.Safety Buckle
N. Anti-Bacterial Seat Pad
(Double-Sided)
O. Adjustable Footrest
P. Front Swivel Locks (x2)
Q. Front Swivel Wheels (x2)

5
017327 - Willow 4 Wheel Stroller - 11A/16
Assembling Stroller
1a
1b
STEP 1: OPENING STROLLER
• If the stroller has a security tie, please
remove it.
• Release the storage latch (Figure 1a).
• Simultaneously lift handle while
pulling on the frame until the locking
mechanism engages (Figure 1b).
• Push down on the handle to check
that locks have fully engaged.

6017327 - Willow 4 Wheel Stroller - 11A/16
Assembling Stroller
STEP 2: REAR WHEEL ASSEMBLY
• Slide rear wheels onto the frame
of the stroller (Figure 2a).
• Push the wheels in until you hear
them lock into place.
• Listen for ‘click’.
• To remove the rear wheel assembly,
pull and hold the metal tab while
removing rear wheel from the axle
(Figure 2b). Repeat on the other side.
2a
2b
3a
3b
STEP 3: FRONT WHEEL ASSEMBLY
• Align the shaft on the wheel with
the hole in the front leg and push in
(Figure 3a). Listen for a ‘click’.
• Repeat on the other side.
• To remove the front wheel assembly,
press the metal tab inwards while
pulling the wheel off (Figure 3b).

7
017327 - Willow 4 Wheel Stroller - 11A/16
Assembling Stroller
STEP 6: ATTACHING CANOPY
• Align both canopy ends with the
plastic sliders on the frame then slide
the ends of the canopy down until
they are fully engaged (Figure 4a).
• Attach the velcro tabs to secure
canopy to stroller back (Figure 4b).
4a
4b
STEP 5: ATTACH BUMPER BAR
• Align bumper bar with the plastic
sliders on the frame then slide the
ends of the bumper bar down until
it is secure in place (Figure 5a).
• Listen for the ‘click’, then repeat
on the other side.
• To remove bumper bar, press
the grey buttons on each side
of the bumper bar (Figure 5b),
and remove.
5a
5b

8017327 - Willow 4 Wheel Stroller - 11A/16
Using Stroller
OPERATING FRONT SWIVEL
WHEELS
• Position the front wheel
as per Figure 6a.
• To lock, align the swivel lock
button with the frame and
push downwards (Figure 6b).
• To unlock, push the swivel
lock button upwards (Figure
6c).
6b
6c
6a
7a
7b
LIFT TO
UNLOCK
PUSH TO
LOCK
OPERATING BRAKES
• To apply the brake, press down
firmly on the brake pedal using
the ball of your foot (Figure 7a).
• To release the brake, lift the brake
pedal until the brakes have fully
disengaged (Figure 7b).
Apply all brakes whenever
you park the stroller.
WARNING

9
017327 - Willow 4 Wheel Stroller - 11A/16
Using Stroller
USING CANOPY
• To use the canopy, pull the front edge
forward to open (Figure 9a, 9b).
• To extend canopy, flip the visor
outwards into position (Figure 9c).
• To further extend canopy, unzip and
pull the front edge forward to reveal
the breathable mesh extension
(Figure 9c).
• When not using, ensure the extension
is zipped, and then simply push the
canopy back until it is fully collapsed.
9a 9b 9c
8c
ADJUSTING THE BACKREST
• To set backrest upright, pull both
straps outwards until tight (Figure 8a).
• To lower backrest, squeeze clip on
both sides to loosen straps (Figure 8b)
and pull seat downwards (Figure 8c).
8a
8b
PULL
STRAPS

10 017327 - Willow 4 Wheel Stroller - 11A/16
Using Stroller
TO FIT THE RAINCOVER
• Spread the raincover over the
stroller and pull over the seat
(Figure 11).
• Use elastic straps to secure to
stroller.
10
ADJUSTING FOOTREST
• Press both adjustment buttons
simultaneously and adjust to the
desired position (Figure 11). Listen
for ‘click’ to lock in place.
11

11
017327 - Willow 4 Wheel Stroller - 11A/16
Using Stroller
DG E
B
FC
A A
A1
SECURING YOUR CHILD
5 points of the harness can be adjusted by moving each straps’ slider (gure A1).
To tighten or loosen the waist and/or shoulder straps, hold and lift the plastic
adjuster. Adjust straps to desired position. The waist strap needs to fit firmly around
the child.
1. Slip one shoulder strap (A)
over each shoulder and position
crotch strap between legs (B)
2. Place buckle prong (D) on top of buckle prong (C)
3. Insert the prongs into the buckle housing (E) until it clicks into position. Repeat the
above steps for the opposite side (F and G). Pull straps to ensure they are locked
into the buckle assembly.
4. The harness should resemble this image.
5. The buckle is released by squeezing the top and bottom prongs together until
harness disengages. (Figure 5).
C
D
2
E
3
DG
FC
4
SQUEEZE
5

12 017327 - Willow 4 Wheel Stroller - 11A/16
• Use this harness at all times.
• A five-point harness is provided to secure your child.
• When not in use disconnect shoulder straps from the waist strap and
buckle.
• The adjusted harness should closely fit the child.
WARNING:
TETHER STRAP
• Correct use of the tether strap will
prevent stroller runaway
and possible injury to the stroller
occupant.
• Whenever a child is in the stroller and
brakes are not engaged,
the large loop should be around your
wrist, as per Figure 14.
WARNING:
USE THIS STRAP TO STOP THE STROLLER ROLLING AWAY.
14
ADJUSTING HARNESS HEIGHT
• The harness can be set at varying heights to
accommodate the child, depending on the
model.
• To change the shoulder harness height, position
the shoulder straps near the child’s shoulders
and push the shoulder harness tongue out of
the current harness slot and through the back
of the seat. Pull the shoulder harness tongue
through the desired slot.

13
017327 - Willow 4 Wheel Stroller - 11A/16
15c
FOLDING STROLLER
• Before beginning: fold the canopy
back, unlock the swivel wheels,
apply all brakes, and adjust the
seat backrest to full layback
position.
• Press and pull folding lock on
the handle (Figure 15a) while
firmly holding in the secondary
lock on the handle underside
(Figure 15b).
• Press down on the handle to fold the stroller
while keeping the folding locks engaged.
• The storage latch will automatically engage
when fully folded (Figure 15c).
16
CARRYING STROLLER
• Fold the stroller, and ensure that
storage latch is applied before
continuing.
• Carry stroller by holding frame
between the seat mount bracket
and the storage latch (Figure 16).
Using Stroller
CANOPY
FOLDED
BRAKES
APPLIED
SWIVELS
UNLOCKED
BACKREST
LOWERED
15b
15a

14 017327 - Willow 4 Wheel Stroller - 11A/16
17b
UNFOLDING STROLLER
• Release the storage latch
(Figure 17a).
• Lift handle until stroller is fully open
and locking mechanism engages
(Figure 17b).
• Push down on the handle to check
that the locks have been fully
engaged.
17a
Using Stroller

15
017327 - Willow 4 Wheel Stroller - 11A/16
• Always store in a clean and dry place.
• Clean the frame by wiping with a damp cloth.
• Do not use abrasives, bleach or strong detergents.
• Spot clean fabrics with warm water and mild soap.
• Ensure fabric is dry before storing.
• Occasionally clean and lubricate wheels with a light lubricating oil.
• Regularly check for loose parts and tighten when required.
• Damaged or broken parts should be immediately replaced.
Care and Maintenance

017327 - Willow 4 Wheel Stroller - 11A/16
-----
Specifications are subject to change without notice.
Copy or reproduction without permission is prohibited.
© 2016 Dorel Australia Pty Ltd. All Rights Reserved.
www.dorel.com.au
[email protected]