
Important Safety and Environmental Instructions
Read all instructions. Do not throw away this safety guide.
Before use, please read these safety warnings carefully and use the tea maker properly.
These safety warnings are indicated for the safe and proper use of this product, prevent
danger to the user or others, and damage property.
• Do not touch hot surfaces. Use handle or knob..
• To protect against fire, electric shock, and injury
to persons, do not immerse kettle, plug, or cord in
water or other liquid.
• Unplug when not in use and before cleaning.
Allow cooling before putting on or taking off parts.
Contact Customer Support.
• Do not use third-party replacement parts or
accessories, as this may cause injuries.
• Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions
or has been damaged in any manner. Contact
Customer Support.
• Do not use outdoors.
• Do not place on or near a hot gas or electric
burner. Always attach the plug to the appliance
first, then plug the cord into the wall outlet. To
disconnect, turn any control to “off” then remove
the plug from a wall outlet.
• Do not use the appliance for other than intended
use. For household use only.
• Do not use your kettle for any purpose other than
described in this manual.
• Not for commercial use. Household use only.
• To avoid burns and risk of personal injury, use
extreme caution when carrying your tea maker
containing hot water or tea.
• Do not use the kettle if your hands are wet.
• Position the kettle properly on the power base
before switching on.
• DO NOT HEAT AN EMPTY KETTLE: The concealed
heating element in the bottom of the kettle is
protected by an automatic safety device. If your
kettle is accidentally heated without being filled or
is allowed to boil dry, the automatic safety device
will be activated, device will automatically cool
down and then turn off. If this happens, unplug the
kettle, fill it with cold water, and wait a few minutes
before replacing it on the base and plugging it in.
• Use the kettle only with a delivered power base.
• Do not use any other kettle on the delivered base
or any other base with a delivered kettle. Use only
the original, delivered pair together.
• After using the kettle, wait until the kettle has
cooled down before removing the lid.
• To avoid possible steam damage, turn spout
away from walls or cabinets during use.
• Scalding may occur if the lid is removed during
the brewing cycles. If the kettle is overfilled, boiling
water may be ejected.
• Never use your kettle without the parts in place.
• Keep your unit away from flammable materials.
Use on a flat, stable, heat-resistant surface away
from heat sources or liquid. The kettle is only to be
used with the stand provided.
• Warning: Avoid spillage on the connector.
• Warning: Potential injury from misuse.
• Do not remove the lid while the water is boiling.
• This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt
to modify the plug in any way.
• Keep the power cord away from hot surfaces.
Do not plug in the power cord or operate the Unit
controls with wet hands.
• Your kettle should only be used with 120V, 60 Hz
electrical systems. Do not plug into another type
of outlet.
• If you place the kettle different from the its base,
use a protective pad under the kettle after it has
been heated to prevent damage to surfaces.
• To reduce the risk of fire or electric shock, do
not remove the bottom cover from the base or
disassemble the base or kettle in any way. There
are no user-serviceable parts inside. Repair
should be done by authorized service personnel
only. Opening base or kettle will result in a void of
the one-year warranty.
General Safety
While Boiling
Plug & Cord
Do not throw away this safety and environmental guide.
2