Light and rigid construction due to the compact and strong
structural design of the unit. Slim unit design also fullls the
stringent space requirement of today’s building design. High Air
Volume FCU with the height of only 430mm is most suitable for
applications that demand for high air ow but with space saving
in mind.
High quality copper pipes with slit prole aluminum ns are being
transformed into high efciency heat exchanger through advance
design, manufacturing equipment and processes.
Through stringent static and dynamic balancing tests of motors,
coupled with high quality thermal and acoustic insulation in the
unit, superb low noise performance is achieved.
Standard fan coil units come with low ESP (0Pa) and high ESP
(30Pa and 60Pa) options to suit different applications. In addition,
80Pa fan coil units are available as non-standard options. High Air
Volume FCU comes with Standard ESP and High ESP options to
add to the product line up.
Unique design of the fan coil units allow easy on-site modications
of water pipes conguration (left or right). Accessories are also
available to ensure trouble-free installation.
The fan coil units are equipped with high quality electrical motor
with low noise bearing that do not require lubrication and thus
minimum maintenance effort required. Blowers and also motors
can be dismantled individually if cleaning of heat exchanger is
needed. High efciency lter provides better ltration than normal
lter with longer operational life and easy to clean.
One piece molded drain pan with integral thermal insulation
and professional welding skill enable all condensate water to be
collected and prevent condensation at the outside of the drain pan.
Heat exchanger with 2MPa operating pressure design will withstand
all operation condition to provide leak-free fan coil units.
All fan coil units are manufactured in a ISO9001:2000 and
ISO14000:2004 certied manufacturing facility whereby highest
products’ quality is always the top priority. The products’ high
quality standard has been recognized through successfully
obtaining the CE marking certication which in turn comply with
the stringent EU requirements.
Slim and Compact
Design
High Efciency Heat
Exchanger
Low Noise
Multiple ESP Options
Simple Installation
Features
