Salter NM10-GB User manual

NM10-GB
Instruction manual

IB-NM10-GB-1217-01
FKA Brands Ltd
Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK
Customer Support: [phone] |[email protected]
INSTRUCTIONS FOR USE:
1. Plug adaptor into a 220-240V AC
outlet and plug the receptacle end
into the input jack, located along the
handle of the neck massager.
2. Place massager around neck (Fig. 1)
or area of back you wish to massage.
Convenient straps help assist in easy
positioning and intensity control.
Note: Do not use this product for
more than 15 mins at a time.
There is a 15 minute auto shut-o on this
appliance for your safety. This feature
should not be considered as a substitute
for ‘OFF’. Always remember to switch the
appliance o when not in use.
MAINTENANCE:
Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only with a
soft, slightly damp sponge.
• Never allow water or any other liquids to come into contact with the
appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint
thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects which might cut or puncture the fabric
surface.
To avoid breakage, DO NOT wrap the power cord around the appliance.
DO NOT hang the unit by the cord.
Power Button
To turn on the massage function, press the
power button once. Press a second time to
switch o.
Heat Button
For soothing heat, when massage is on, simply
press the heat button and the massage nodes
on the neck unit will illuminate. To deselect,
press the button again and the corresponding
massage nodes will stop glowing.
Speed Control
The massager will start up at its highest
speed setting. Press the speed control button
during use to change the speed between the 3
settings - high, med and low.
PRODUCT FEATURES: Convenient and Portable, perfect for use at home or in the oce.
Fig. 1