Sami WEARABLE WS-2357 User manual

WEARABLE
User Manual
WS-2357
Thank you for purchasing the SamiWearable WS-2357. Read the
instructions carefully to obtain optimum results and preserve it for
future reference. Sami has developed wearable devices since 2015
and we use the best components possible for the product.
DESCRIPTION OF THE WEARABLE
CONTENTS
Wearable, magnetic SEAT charging cable, instruction manual.
CHARGING
Connect the device preferably to a power adapter. If not you can
then connect to a computer or laptop with the USB cable for
charging. Take out the device from the strap if needed and then put
it on the Magnetic SEAT for charging. Make sure the charging points
are in right position on SEAT. Kindly use only the USB cable included
with the wearable. If you use a power adapter for charging, the
output of the power adapter should be 5V, 1A. Charging time: 2 hours.
Please charge the device fully before using it.

HOW TO POWER ON / POWER OFF?
1) To turn ON the smart band, on the screen, long press the touch
button (the fixed-point touch control area) forfew seconds to
power on. The touch button is situated at the bottom of the
screen.
2) To turn OFF the smart band, in the home screen menu short
press the touch button until the Function (Settings) menu displays,
then long press the touch button to enter in the Function menu,
short press the touch button until thePower Off icon displays, long
press again the touch button for few seconds to make it power
off.
HOW TO CONTROL?
On the display screen, short press the touch button to change
between the different menus; Long press the touch button to enter;
long press the touch button to return. Long press the touch button to
achieve different functions.
GETTING STARTED:
- For Android
1) How to obtain the BT Connection APK (FLAGFIT 2.0)
Search for the FLAGFIT 2.0 APP in the Play Store; download it and
install it in your Android smartphone, or go to our website
www.sami.es anddownload the application.
2) Installation of the FLAGFIT 2.0 APK.
When installing the FLAGFIT 2.0 application on your Android, you must
allow all the Application Permissions, allow this FLAGFIT 2.0 app auto
run.
The first time you run this FLAGFIT 2.0, it will ask you to Enable

Notifications, please tap OK and tap the FLAGFIT 2.0 and confirm OK.
You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On
your Android permission management, allow all application
permissions.
3) How to make the wearable pair with your Android smart phone?
*First, turn on the Bluetooth of your Phone.
*Second, run the FLAGFIT 2.0app on your Phone, on the home page
of FLAGFIT 2.0, select “Me” (icon situated in the right bottom of the
FLAGFIT 2.0 homepage), select “Add device”, the APP will search
for new Bluetooth device(s), when the available Bluetooth device
displays, please select WS-2357 (the BT name of this device) to make it
pair. The pairing will be finished in a few seconds. When you pair for
the first time, the app FLAGFIT 2.0will ask you to fill some personal
information such as gender/ age/ height/ weight. When you finish
select OK/Confirm/Allow for any pop-up request such as allow
location, use of Bluetooth or allow to send notifications.
* Now you can start using your desired functions of the smart band.
Important: To enable all notifications of different software such as
WhatsApp, Facebook, Skype, Twitter, you may need to turn on the
notifications on the APP manually. On the FLAGFIT 2.0 homepage,
select the “Play”icon (situated at the centre bottom of the home
interface) then tap and select “Call reminder”to turn it on,and
tap and select “SMS reminder”to turn it ontap and select “More”to
enter in more menu of notifications，turn on all the APP notifications
those you want to active.
Please note that for correct functioning of the reminders you must
have allowed location access to the app.
For Android smart phone, in order to achieve all of the functions
which are supported by the FLAGFIT 2.0 app, must allow the FLAGFIT
2.0 app runs in background, must tap OK/Confirm/Allow/Yes for any
of the pop-up request at the 1st time of running of theFLAGFIT 2.0
APK/APP. And it may need you to turn on the FLAGFIT 2.0 app in the
Android smart phone’s Accessibility: go to the settings of the
smartphoneAccessibilityfind theFLAGFIT 2.0 app and turn it on.

- For iPhone
1) How to obtain the BT Connection APP? (FLAGFIT 2.0)
On iPhone, please go to APP Store and search FLAGFIT 2.0 and install
the app.
2) How to make the wearable pair with your iPhone?
*First, turn on the Bluetooth of iPhone
* Run the FLAGFIT 2.0 app on the iPhone, on the home page of
FLAGFIT 2.0, select “Profile” (which is situated at the right bottom of
the FLAGFIT 2.0 homepage), select “+Add a new device”, the APP
will search for new Bluetooth device(s), when the available Bluetooth
device displays, please tap WS-2357 (the BT name of this device) to
make it pair. The pairing will be finished in few seconds.When you pair
for the first time, the app FLAGFIT 2.0 will ask you to fill some personal
information such as gender/age/height/weight. When you finish
select OK/Confirm/Allow for any pop-up request request such as
allow location, use of Bluetooth or allow to send notifications.
* Now you can start using your desired functions of the smart band.
Important: To enable all notifications of different softwares such as
WhatsApp, Facebook, Skype, Twitter, you may need to turn on the
notifications on the APP manually. On the FLAGFIT 2.0 homepage,
select the “Play/Smart”icon (which is situated at the centre bottom
of the interface) then tap and select “Call”and turn it ontap and
select “SMS”and turn it ontap and select “More”to enter in more
menu of notifications，turn on all the APP notifications those you want
to active.
Please note that for correct functioning of the reminders you must
have allowed location access to the app.
ATTENTION: For both iOS or Android, the wearable should be Bluetooth
paired with the smart phone through the FLAGFIT 2.0 app; should not
be paired through your smart phone’s Bluetooth settings. If you have
already paired it on the Bluetooth at your smartphone settings, unpair
it and forget the device to start the correct binding through the app.

PRODUCT FEATURES
BLUETOOTH (V 4.2LE)
TOUCH BUTTON (Fixed-point touch control). This model is not FULL
touch control.
TOUCH SCREEN. touch screen 0.96"
BUILT IN VIBRATING MOTOR
BUILD IN HEART RATE SENSOR
BUILD IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN
DISPLAY SCREEN INTERFACE
1)Time/Date/Steps/ Battery displaying/Bluetooth pairing status
2)Steps /Calories/Distance (Pedometer)
3)Heart rate monitor
4) Blood pressure test
5) Blood oxygen(SPO2) test
6) Training - Running/Riding/Skipping/Pingpong/Badminton/Tennis
7) Female health –this function is for ladies only. Set it at FLAGFIT 2.0
APK/APP.
8) Breath –relax yourself in a guided breathing exercise.
9) Message –long press the Touch button to enter to view new
messages, on message interface long press the Touch button to
return.
10) Functions –Info, Reset, Power Off, Find me(search for phone),
Lightness(Brightness)
11)Different dials (clock screens) –on home screen long press Touch
button to switch between different dials.
Data can be sync from the wearable to the smart phone on the
FLAGFIT 2.0 APK/APP.
Your smart phone will synchronized when the Bluetooth is paired with
this device.
FUNCTIONS
PHONE CALL NOTIFICATION - vibrating reminder for incoming phone
calls
MESSAGE NOTIFICATION - vibrating reminder/preview for incoming

messages, including SMS, WhatsApp, Facebook, Twitter, Skype
messages, etc.
CLOCK SCREENS - Different home digital clocks
ALARM CLOCK - supported on the FLAGFIT 2.0 APK/APP
SEDENTARY REMIDER( INACTIVITY REMINDER/ REMIND TO MOVE) -
supported on the FLAGFIT 2.0 APK/APP
FIND THE DEVICE (Looking for the SMART BAND) - supported on the
FLAGFIT 2.0 APK/APP
SHAKE TO TAKE SELFIE (remote camera control) - Support at the
FLAGFIT 2.0 APK/APP.
GESTURE CONTROL (Raise your hand to light up the screen. Before using
this function, you may need to makeadjustment in FLAGFIT 2.0
APK/APP
GPS MAP TRACE TRACKING-supported on the FLAGFIT 2.0 APK/APP. On
the home page of FLAGFIT 2.0 APK/APP, tap “Today/Home”tap the
map icon which is situated on right top tap “Start” to view the
real-time GPS map. The GPS map trace can be viewed and can be
stored.
MULTIPLE LANGUAGES - supported on the FLAGFIT 2.0 APK/APP, some
icons may always appear in English.
LADIES’ PHYSIOLOGICAL CYCLE CALCULATOR - supported
GOAL OF STEPS TRACKING- supported on the FLAGFIT 2.0 APK/APP
**** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE
APPROXIMATE

CLEANING:
In order to avoid any damage on the plating or printing of your
wearable please do not use any chemical product for cleaning such
as alcohol 96º. We recommend you to use a slightly wet cloth.
TECHNICAL SPECIFICATIONS:
Display screen: Fixed-point capacitive touch screen 0.96".
Screen resolution: 80x160 pixels.
Internal Memory: RAM 160KB, ROM 248KB+32MB
System:Nucleus
CPU:RealtekRTL8752c
Charge I/O port : USB magnetic SEAT charging cable
Battery: Built in Li-Polymer 90 mAh
Stand by time: 10~15 DAYS
Working time: 5~7 DAYS
Bluetooth: 4.2LE
Water-resist Rating: IP67 (this device resists raindrops, it’s not water
proof)
Weight: 23g (including the strap)

Declaration of Conformity
Hereby we,
Name of manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code & City:
28947 - FUENLABRADA( MADRID )
Country:
SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description:
Smart Band
Type designation(s):
WS-2357
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position:ADMINISTRATOR
Date: 24/ 02 / 2021