Sami WEARABLE WS-2378 User manual

WEARABLE
User Manual
WS-2378
Thank you for purchasing the Sami wearable WS-2378. Read the instructions
carefully to obtain optimum results and preserve it for future reference.
DESCRIPTION OF THE WEARABLE.
CONTENTS.
Wearable, USB magnetic charging cable, instruction manual.
CHARGING.
Connect the device to a computer or laptop with the USB Magnetic cable for
charging. Put in contact the magnetic end of the USB cable with the charging
points positioned in the back of your device. Kindly use only the USB cable
included with the wearable. If you use a power adapter for charging, the
output of the power adapter should be 5V, 1A. Charging time: 1-2 hours approx.
Please charge the device fully before using it. Take care with the magnet side
of the cable, if you connect to the AC and you have contact with a metal
surface, you may damage the charging cable.

HOW TO POWER ON / POWER OFF?
1) To turn ON the smart band, long press the side button ON for a few
seconds.
2) To turn OFF the smart band, long press the side button ON for a few
seconds. Then choose the option of Power off.
HOW TO CONTROL?
This device is equipped with a full touch display screen, it supports full screen
touch control.
1) In the home page slide the screen as in the following diagram to enter to
the different interfaces :
TOUCH SCREEN
Hear Rate, SPo2, Sleep, Weather, Remote Player, Daily Data.
BUTTON PRESS MENÚ ACCESS
1) Short tap in the icon to select/enter in that menu. In the submenus slide
from left/right or top/bottom to go to the next/previous page. Short press
the side button to return to the previous interface.
2) You can download and install more dials on the dial market by the app.

GETTING STARTED:
- For Android
1) How to obtain the BT Connection APK (Infowear)
Search for the Infowear APP in the Play Store; download it and install it in your
Android smartphone, or go to our website www.sami.es and download the
application.
2) Installation of the Infowear APK.
When installing the Infowear application on your Android, you must allow all the
Application Permissions, allow this Infowear app auto run.
The first time you run this Infowear app, it will ask you to Enable Notifications,
please tap OK and tap the Infowear and confirm OK. You must tap
OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission
management, allow all application permissions.
3) How to make the wearable pair with your Android smart phone?
*First, turn on the Bluetooth of your Phone.
*Second, run the Infowear app on your Phone, on the home page of Infowear,
find the pairing request by the setting all your values requested and then select
“watch”. You must have the screen of the watch on and the APP will search for
new Bluetooth device(s), when the available Bluetooth device displays, please
select WS-2378 (the BT name of this device). Select the device on the app to
make it pair. Select “confirm tick”on the watch and the pairing will be finished
in a few seconds. When you pair for the first time, the Infowear app will ask you
to o enable GPS and Bluetooth, and authorize Infowear to get access to the
location service while using the app. Please accept all the requests for the
correct functioning of the device. When you finish select OK/Confirm/Allow for
any pop-up request.
4) In the case that on the watch you have the QR CODE on the screen, then in
the APP Infowear click the icon of scan on the top left of the menu and scan
the qr code of the watch with the camera.
Important: To enable all notifications of different softwares such as WhatsAPP,
Facebook, Skype, Twitter, you will need to turn on the notifications on the APP
manually. On the VeryFit homepage, select the icon “Device” (situated on the
right bottom of the screen), select “WS-2378”select “message notification”
turn on “Allow notification”and turn on all the APP notifications you want to
active. To confirm you must click on the icon
- For iPhone
1) How to obtain the BT Connection APP (VeryFit)
Search for the Infowear APP in the APP Store; download it and install it in your
iOS smartphone
2) Installation of the Infowear t APP.
When installing the Infowear application on your iOS, you must allow all the
Application Permissions, allow this Infowear app auto run.
The first time you run this Infowear app, it will ask you to Enable Notifications,
please tap OK and tap the Infowear and confirm OK. You must tap
OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission
management, allow all application permissions.
3) How to make the wearable pair with your Android smart phone?
*First, turn on the Bluetooth of your Phone.

*Second, run the Infowear app on your Phone, on the home page of Infowear,
find the pairing request by the setting all your values requested and then select
“watch”. You must have the screen of the watch on and the APP will search for
new Bluetooth device(s), when the available Bluetooth device displays, please
select WS-2378 (the BT name of this device). Select the device on the app to
make it pair. Select “confirm tick”on the watch and the pairing will be finished
in a few seconds. When you pair for the first time, the Infowear app will ask you
to o enable GPS and Bluetooth, and authorize Infowear to get access to the
location service while using the app. Please accept all the requests for the
correct functioning of the device. When you finish select OK/Confirm/Allow for
any pop-up request.
4) In the case that on the watch you have the QR CODE on the screen, then in
the APP VeryFit click the icon of scan on the top left of the menu and scan the
qr code of the watch with the camera.
* Now you can start using your desired functions of the smart band.
Important: To enable all notifications of different softwares such as WhatsAPP,
Facebook, Skype, Twitter, you will need to turn on the notifications on the APP
manually. On the Infowear homepage, select the icon “Device” (situated on
the right bottom of the screen), select “Infowear”select “message
notification”turn on “Allow notification” and turn on all the APP notifications
you want to active. To confirm you must click on the icon located on the
top right
PRODUCT FEATURES
BLUETOOTH (BLE 5.0)
TOUCH SCREEN. TFT LCD 1.32" full touch screen
BUILT IN VIBRATING MOTOR
BUILT IN HEART RATE SENSOR
BUILT IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN
ALLUMINIUM MIDDLE FRAME
WATER PROOF 5 ATM
BUILT IN GPS
1) Time/Date/Battery displaying
2) Several Sports as –Outdoor running / Treadmill / Outdoor cycling / Cycling
/ Walking / Skating / Freestyle / Basketball / Cricket / Badminton / Tennis / Trail
Run / Trekking / Volleyball / Rope Skipping / Climbing Machine / Yoga /
Baseball.
Enter to the sports mode by selecting the sports icon, select
the sport type enter the sports countdown automatically.
During sports, to pause sports short press any side button, and
to restore sports short press the side button again. To end up
sports long press any side button and then confirm end.
This watch has a built in GPS which can track your activity on outdoor sports.

3) Exercise record
4) Heart Rate
5) Alert High Heart Rate
6) Blood oxygen
7)Sleep
8)Weather forecast

9)Music control –control music via bt on your mobile. Watch cannot
playback or store music
10) Stopwatch
11) Timer
12) Find phone
13) Alarm Clock
Up to 5 Alarm Clocks, manage through app.
14) Settings: Built in watches faces/Brightness/Vibration/Raise to wake
dial/Sytem Settings (Restart/Power Off/Reset)/ APP Qr Code/ About (info of
device)

Data can be sync from the wearable to the smart phone on the Infowear
APK/APP.
Your smart phone will synchronize when the Bluetooth is paired with this device.
FUNCTIONS
PHONE CALL NOTIFICATION - vibrating reminder for incoming phone calls and
display on screen. This function needs to be turned on manually at the Infowear
APK/APP.
MESSAGE NOTIFICATION - vibrating reminder for incoming messages and
display on screen, including SMS, WhatsApp, Facebook, Twitter, Skype
messages, etc. This function needs to be turned on manually at the Infowear
APK/APP. Memory for 10 messages.
CLOCK SCREENS (Different home digital clocks) - In the home screen of the
smart band, long press the screen for a few seconds to change the style of the
digital clock. You can also select the cloud dials from the APK/APP
SLEEP MONITOR - supported on the watch and Infowear APK/APP
ALARM CLOCK - supported on the watch and Infowear APK/APP
FIND THE DEVICE (Looking for your mobile phone) supported on the Infowear
APK/APP
SEDENTARY REMIDER (REMIND TO MOVE) –set it on the Infowear APK/APP
Do Not Disturb Mode –set it on the Infowear APK/APP
GESTURE CONTROL (Raise your hand to light up the screen).
IN BUILT GPS: view it on the BT APP/APK Infowear when you do your sports.
When in new location, the GPS will calibrate automaticlly.
TECHNICAL SPECIFICATIONS:
Display screen: TFT LCD screen 1.32". Full colour touch screen
Screen resolution: 360*360
Internal Memory: 128kb
MCU: Dialog 14695
Touch Sensor: G+F
Acelleration and gyroscopes:ST LIS2DW12
GPS: BCM47755
Heart rate sensor: HX3690
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 480mAh
Stand by time: 30-40 days
Working time: 7-10 days
Bluetooth: 5.0
Water-resist Rating: 5ATM this device resists 50 meters waterproof (5ATM). Not
valid for hot water shower due to vapor.
Weight: 62g

Declaration of Conformity
Hereby we,
Name of manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code & City:
28947 - FUENLABRADA ( MADRID )
Country:
SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description:
Smart Band
Type designation(s):
WS-2378
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 10/05/2023