Sami WEARABLE WS-2381 User manual

WEARABLE
User Manual
WS-2381
Thank you for purchasing the Sami wearable WS-2381. Read
the instructions carefully to obtain optimum results and
preserve it for future reference. Sami has developed
wearable devices since 2015 and we use the best
components possible for the product.
DESCRIPTION OF THE WEARABLE.
CONTENTS
Wearable, USB Magnetic charging cable, instruction manual.

CHARGING
Connect the device to a computer or laptop with the USB
Magnetic cable for charging. Put in contact the magnetic
charging cable with the charging points positioned in the
back of your device. Kindly use only the USB cable included
with the wearable. If you use a power adapter for charging,
the output of the power adapter should be 5V, 1A. Charging
time: 1:30 - 2 hours. Please charge the device fully before
using it. Take care with the magnet side of the cable, if you
connect to the AC and you have contact with a metal
surface, you may damage the charging cable.
NOTE: Do not have the charger connected to AC and the
magnets touching any metallic surface, this will create a high
heating of the cable and will damage it.
HOW TO POWER ON / POWER OFF?
1)To turn ON the smart band, long press the ENTER button
for few seconds to make it Power On.
2)To turn OFF the smart band on menu go to MORE, keep
pressed enter button, than you will have several options
including power off. Long press again with ENTER button
to power off.
3)

HOW TO CONTROL?
1)This watch is not touch screen, it is controlled by the 2 sides
buttons, ENTER / BACK.
2)Press the ENTER button, to scroll through the menu, long
press to confirm.
3)Press BACK button to return.
GETTING STARTED:
- For Android
1) How to obtain the BT Connection APK (WOFIT)
Search for the WOFIAPP in the Play Store; download it and
install it in your Android smartphone, or go to our website
www.sami.es and download the application.
2) Installation of the WOFIT APK.
When installing the WOFIT application on your Android, you
must allow all the Application Permissions, allow this WOFIT
app auto run.
The first time you run this WOFIT, it will ask you to Enable
Notifications, please tap OK and tap the WOFIT and confirm
OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up
request. On your Android permission management, allow all
application permissions.
3) How to make the wearable pair with your Android smart
phone
*First, turn on the Bluetooth of your Phone.
*Second, run the WOFIT app on your Phone, on the home
page of WOFIT, select “ADD A DEVICE”, the APP will search for
new Bluetooth device(s), when the available Bluetooth
device displays, please select WS-2381 (the BT name of this
device) to make it pair. The pairing will be finished in a few
seconds. When you pair for the first time, the app WOFIT will
ask you to fill some personal information such as
gender/age/height/weight. When you finish select

OK/Confirm/Allow for any pop-up request.
* Now you can start using your desired functions of the smart
band.
Important: To enable all notifications of different softwares
such as WhatsAPP, Facebook, Skype, Twitter, you may need
to turn on the notifications on the APP manually. On the WOFIT
homepage, select the Device icon (icon situated at the
bottom of the interface) then select the device WS-2381 
and then select notifications where you can manage all the
APP notifications you want to active.
- For iPhone
1) How to obtain the BT Connection APP? (WOFIT)
On iPhone, please go to APP Store and search WOFIT and
install the app.
2) How to make the wearable pair with your iPhone
*First, turn on the Bluetooth of iPhone
* Run the WOFIT app on the iPhone, on the home page of
WOFIT, tap “ADD A DEVICE” the APP will search for new
Bluetooth device(s), when the available Bluetooth device
displays, please tap WS-2381 (the BT name of this device) to
make it pair. The pairing will be finished in few seconds. When
you pair for the first time, the app WOFIT will ask you to fill some
personal information such as gender/age/height/weight.
When you finish select OK/Confirm/Allow for any pop-up
request.
*Now you can start using your desired functions of the smart
band.
Important: To enable all notifications of different softwares
such as WhatsAPP, Facebook, Skype, Twitter, you may need
to turn on the notifications on the APP manually. On the WOFIT
homepage, select the Settings icon (middle icon situated at
the bottom of the interface) then select notifications, and

turn on all the APP notifications you want to active.
On your phone you must allow the pop up window of WOFIT
to access your location. This is important for reconnection
between the wearable and the phone.
PRODUCT FEATURES
BLUETOOTH (V 5.0)
IPS SCREEN. IPS color screen 0.96"
BUILT IN VIBRATING MOTOR
BUILD IN HEART RATE SENSOR
BUIL IN UV SENSOR
BUILD IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN (Quick
View)
DISPLAY SCREEN INTERFACE
1) Time/Date/Battery
2) Workouts - Exercise
3) Steps (Pedometer)
4) Sleep monitor
5) SpO2 - Long press ENTER to start testing

6) Hear Rate
7) ECG - Electrocardiogramme Start test from the APP WOFIT
8) Blood Pressure
9) Stress
10) Body Fat - put your two fingers on the side electrodes
11) Body Temperature
12) More - Long press ENTER button to enter to Stopwatch -
Find phone - Native info - Power Off - Reset
13) Messages
14) UV rate
Data can be sync from the wearable to the smart phone on
the WOFIT APK/APP. Your smart phone will synchronized when
the Bluetooth is paired with this device.
FUNCTIONS
PHONE CALL NOTIFICATION - vibrating reminder for incoming
phone calls
MESSAGE NOTIFICATION - vibrating reminder for incoming
messages, including SMS, WhatsApp, Facebook, Twitter,
Skype messages, etc.
CLOCK SCREENS (Different home digital clocks) –More Clocks
can be downloaded at the WOFIT APK/APP. In the app go to
the device menu, select “Watch Face styles”
SLEEP MONITOR - built in.
ALARM CLOCK - 8 alarm clocks supported on the WOFIT
APK/APP
HEART RATE FEATURE - built in
ECG FEATURE - built in
OXYGEN FEATURE - built in
BLOOD PRESSURE FEATURE - built in
STRESS FEATURE - built in
BODY TEMPERATURE FEATURE - built in
BODY FAT FEATURE - built in
UV SENSOR FEATURE - built in

STOPWATCH- built in
SEDENTARY REMIDER(REMIND TO MOVE) - supported on the
WOFIT APK/APP
FIND THE DEVICE (Looking for the SMART BAND) - supported on
the WOFIT APK/APP. Find it at the device menu
GESTURE CONTROL (Quick View) (Raise your hand to light up
the screen. Before using this function, you need to make the
adjustment on the smart phone APP)
TRAINING: different sport mode to track your activity.
GPS MAP TRACE (view it on the BT APP/APK WOFIT). On the
home page of the WOFIT, scroll down and select Outdoor
running, tap Start, select the Map icon (this icon is on the right
bottom of the screen), to view the map. On the home page
of the Da Fit, scroll down and select Outdoor running, tap the
history record icon(this icon is situated on the right top of the
screen) to view the GPS trace history.
GOAL TRACKING- supported on the WOFIT APK/APP
**** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE
APPROXIMATE
CLEANING:
In order to avoid any damage on the plating or printing of
your wearable please do not use any chemical product for
cleaning such as alcohol 96º. We recommend you to use a
slightly wet cloth.

TECHNICAL SPECIFICATIONS:
Display screen: 0.96" IPS
Screen resolution: 160x80 pixels.
Internal Memory: 64mb ROM
System: Nucleus
CPU: RTL8762D
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 260 mAh
Stand by time: 20-30 DAYS
Working time: 10-15 DAYS
G-Sensor: STK8321
Health Sensor: 9202 + Double VP60
BF/ECG Sensor: VC8808
UV Sensor: UV10A
Bluetooth: v5.0
Water-resist Rating: IP68 (This device is not waterproof; do not
drown it into water)
Weight: 36 g

Declaration of Conformity
Hereby we,
Name of manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code & City:
28947 - FUENLABRADA( MADRID )
Country:
SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description:
Smart Band
Type designation(s):
WS-2381
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 22/05/2023