ARCHITECT’S & ENGINEER’S
SPECIFICATION
The microphone shall be of a dynamic
type with hypercardioid polar pattern. The
microphone shall provide its output on a male
XLR-type connector. Output impedance shall
be 600 ohms.
The microphone shall be constructed of a
zinc casing and shall contain a triple-plated
multi-stage windscreen and noise filter for the
removal of pops, sibilance and onstage noise,
an aluminum humbucking voice coil for the
elimination of magnetic field interference and
true hum rejection, a Neoprene transformer
cover for the reduction of microphonics, a
high-output Neodymium element, and a multi-
axis shock-mount to minimize handling noise.
The microphone shall be equipped with
an On/Off switch. The microphone shall have
frequency response from 50 Hz to 15 kHz, sen-
sitivity of -71 dBV at 94 dB SPL, and a maxi-
mum SPL of 137 dB. Dimensions shall be 1.8″
(46 mm) head length, 4.2″(107 mm) main
unit length and 6″(152 mm) total length.
Weight shall be 10.5 oz. (300 g). The micro-
phone shall carry a three-year warranty.
The microphone shall be a SAMSON R11.
Specifications subject to change without notice. © 1998 SAMSON
R11 SPECIFICATIONS
Type: Dynamic
Polar Pattern: Hypercardioid
Frequency Response: 50 Hz - 15 kHz
Sensitivity (0 dB = 1 V / 0.1pa @ 1 kHz): -71 dB ± 3 dB
Max. SPL 137 dB
Output Impedance (@ 1 kHz): 600 Ω(Lo Z)
Connector: 3-pin XLR male
Switch: On/Off
Dimensions: 6″•152mm
Weight: 10.5 oz. •300g