Samsung AM072FXVAFH/AA User manual

Refer to the service manual in the GSPN(see the rear cover) for the more information.
AIR CONDITIONER CONTENTS
SYSTEM AIR CONDITIONER
1. Precautions
2. Product Specifications
3. Disassembly and Reassembly
4. Troubleshooting
5. PCB Diagram and Parts List
6. Wiring Diagram
7. Cycle Diagram
8. Key Options
9. Test Operation
10. Reference Sheet
OUTDOOR UNIT
AM072/096/120/144FXVAFH
AM072/096/120/144FXVAFR
AM072/096/120/144FXVAJH
AM072/096/120/144FXVAJR

Section 0
Samsung Electronics 1
Contents
1. Precautions.......................................................................................................... 1-1
1-1 Precautions for the Service ......................................................................................................................................1-1
1-2 Precautions for the Static Electricity and PL.....................................................................................................1-1
1-3 Precautions for the Safety ........................................................................................................................................1-1
1-4 Precautions for Handling Refrigerant for Air Conditioner ..........................................................................1-2
1-5 Precautions for Welding the Air Conditioner Pipe.........................................................................................1-2
1-6 Precautions for Additional Supplement of Air Conditioner Refrigerant...............................................1-2
1-7 Other Precautions........................................................................................................................................................1-2
2. Product Specifications ....................................................................................... 2-1
2-1 The Feature of Product ..............................................................................................................................................2-1
2-1-1 Feature ...............................................................................................................................................................2-1
2-1-2 Changes in comparison to basic mode................................................................................................2-3
2-1-3 Structure of product.....................................................................................................................................2-6
2-2 Product Specifications..............................................................................................................................................2-7
2-2-1 Outdoor Unit ...................................................................................................................................................2-7
2-3 Accessory and Option Specifications ...............................................................................................................2-11
2-3-1 Accessories.................................................................................................................................................... 2-11
3. Disassembly and Reassembly ........................................................................... 3-1
3-1 Necessary Tools.............................................................................................................................................................3-1
3-2 Disassembly and Reassembly.................................................................................................................................3-2
3-2-1 AM072FXVA66..............................................................................................................................................3-2
3-2-2 AM096FXVAJ6/AM120FXVAJ6............................................................................................................ 3-12
3-2-3 AM096FXVAF6/AM120FXVAF6/AM144FXVA66........................................................................3-22
3-3 Caution at compressor exchange ...................................................................................................................... 3-33
3-4 MCU................................................................................................................................................................................ 3-35
3-5 EEV KIT........................................................................................................................................................................... 3-36
4. Troubleshooting.................................................................................................. 4-1
4-1 Check-up Window Description..............................................................................................................................4-1
4-2 Service Operation........................................................................................................................................................4-2
4-2-1 Special Operation..........................................................................................................................................4-2
4-2-2 DVM S Models EEPROM Code Table......................................................................................................4-7
4-2-3 Number Display Method ...........................................................................................................................4-7
4-3 Appropriate Measures for Different Symptom.............................................................................................4-12
4-3-1 Outdoor Unit Operation Flow ............................................................................................................... 4-12
4-3-2 Main PCB has no power phenomenon............................................................................................. 4-15
4-3-3 Communication Error between Indoor and Outdoor Units during Tracking....................4-16
4-3-4 Communication Error between Indoor and Outdoor Units after Tracking........................ 4-18
4-3-5
Communication error between main and sub Unit of outdoor unit or between outdoor units .. 4-19
4-3-6 Internal Communication error of the Outdoor Unit C-Box....................................................... 4-20
4-3-7 Internal PCB Communication error of the Outdoor Unit C-Box..............................................4-21
4-3-8
MCU branch part setup error – inconsecutive connection with the use of 2 branch parts ..... 4-23
4-3-9 MCU branch part setup error-Repeated setup for the same address over 3 times........4-24
4-3-10 MCU branch part setup error-non-installed address setup................................................... 4-25
4-3-11 Setup Error for MCU Branch part – Setup Error for MCU Quantity Used.......................... 4-26

Section 0
2Samsung Electronics
Contents
4-3-12 MCUMCU branch part setup error – Overlapping Indoor unit Address setup.............. 4-27
4-3-13
MCU branch part setup error – Set as being used without connection to an Indoor unit .. 4-28
4-3-14
MCU branch part setup error – Connect an Indoor unit to a branch part not being used ......4-29
4-3-15 MCU branch part setup error – Connect more Indoor units than what is actually set up in
MCU ................................................................................................................................................................4-30
4-3-16 MCU subcooler entrance/exit sensor error (Open/Short).......................................................4-31
4-3-17 Outdoor Temperature Sensor Error..................................................................................................4-32
4-3-18 Cond Out Temperature Sensor Error (Open/Short) ...................................................................4-33
4-3-19 Outdoor Cond Out sensor breakaway error................................................................................. 4-34
4-3-20 Compressor Discharge or Top 1/2 Temperature sensor error ...............................................4-35
4-3-21 Compressor Discharge or Top temperature sensor breakaway error................................ 4-36
4-3-22 E269 : Suction Temperature sensor breakaway error ............................................................... 4-37
4-3-23 High Pressure sensor error (Open/Short)....................................................................................... 4-38
4-3-24 Low Pressure sensor error (Open/Short)........................................................................................4-39
4-3-25 Suction Temperature sensor error (Open/Short)........................................................................4-40
4-3-26 Liquid Pipe Temperature sensor error (Open/Short)................................................................. 4-41
4-3-27 EVI In Temperature sensor error (Open/Short) ............................................................................ 4-42
4-3-28 EVI Out Temperature sensor error (Open/Short) ........................................................................ 4-43
4-3-29 Suction-2 Temperature Sensor Error (OPEN/SHORT)................................................................4-44
4-3-30 Measures of other outdoor unit error ............................................................................................. 4-45
4-3-31 E407 : Comp. Down due to High Pressure Protection Control ............................................. 4-46
4-3-32 E410 : Comp. Down due to Low Pressure Protection Control...............................................4-47
4-3-33 E416 :
Suspension of starting due to Compressor discharge temperature sensor
/ Top temperature sensor
........................................................................................................4-48
4-3-34 3-phase Input Wiring error................................................................................................................... 4-49
4-3-35 E428 : Suspension of starting by abnormal compression ratio............................................ 4-50
4-3-36 EVI EEV Open error .................................................................................................................................. 4-51
4-3-37 Refrigerant leakage error......................................................................................................................4-52
4-3-38 Prevention of heating / cooling operation due to outdoor temperature........................ 4-53
4-3-39 Prevention of heating refrigerant charge due to outdoor temperature ..........................4-54
4-3-40 CH wire breaking error...........................................................................................................................4-55
4-3-41 Fan starting error...................................................................................................................................... 4-56
4-3-42 Fan lock error .............................................................................................................................................4-58
4-3-43 Momentary Blackout error ......................................................................................................................... 4-59
4-3-44 Outdoor Fan Motor overheating....................................................................................................... 4-60
4-3-45 Fan IPM Overheat error.......................................................................................................................... 4-61
4-3-46 Compressor starting error.................................................................................................................... 4-62
4-3-47 Inverter Overcurrent error....................................................................................................................4-64
4-3-48 Overvoltage / Low voltage error ....................................................................................................... 4-67
4-3-49 DC Link voltage sensor error............................................................................................................... 4-68
4-3-50 Fan Motor Overcurrent error............................................................................................................... 4-69
4-3-51 Input / Output Current sensor error.................................................................................................4-70
4-3-52 Outdoor Fan PCB Overvoltage / Low voltage error...................................................................4-71
4-3-53 Hall IC(Fan) error.......................................................................................................................................4-72
4-3-54 Inverter Overheat error.......................................................................................................................... 4-73
4-3-55 Option setting error of outdoor unit ............................................................................................... 4-74
4-3-56 Model mismatching of Indoor unit. ................................................................................................. 4-75
4-3-57 Error due to using single type outdoor unit in a module installation............................... 4-76

Section 0
Samsung Electronics 3
Contents
5. PCB Diagram and Parts List ............................................................................... 5-1
5-1 ASS'Y PCB MAIN ...........................................................................................................................................................5-1
5-2 ASS'Y PCB MAIN-HUB ................................................................................................................................................5-3
5-3 ASS’Y PCB INVERTER ..................................................................................................................................................5-7
5-4 ASS’Y PCB FAN ..............................................................................................................................................................5-9
5-5 ASS’Y PCB EMI .......................................................................................................................................................... 5-11
5-6 SUB-COMM ................................................................................................................................................................ 5-12
6. Wiring Diagram ................................................................................................... 6-1
6-1 M072/096/120/144FXVA66 ...................................................................................................................................6-1
7. Cycle Diagram ...................................................................................................................7-1
7-1 AM072FXVAFH/AM072FXVAJH..............................................................................................................................7-1
7-2 AM096FXVAJH/AM120FXVAJH..............................................................................................................................7-1
7-3 AM096FXVAFH/AM120FXVAFH/AM144FXVAFH/AM144FXVAJH............................................................7-2
7-4 AM072FXVAFR/AM072FXVAJR...............................................................................................................................7-2
7-5 AM096FXVAJR/AM120FXVAJR ...............................................................................................................................7-3
7-6 AM096FXVAFR/AM120FXVAFR/AM144FXVAFR/AM144FXVAJR..............................................................7-3
7-7 Cooling operation (H/R)............................................................................................................................................7-4
7-8 Main cooling operation (H/R) .................................................................................................................................7-5
7-9 Heating operation (H/R)............................................................................................................................................7-6
7-10 Main heating operation (H/R) ..............................................................................................................................7-7
7-11 Cooling operation (H/P)..........................................................................................................................................7-8
7-12 Heating operation (H/P) .........................................................................................................................................7-9
7-13 Cycle Component Function Explanation .................................................................................................... 7-10
8. Key Options ......................................................................................................... 8-1
8-1 Outdoor unit option switch settings...................................................................................................................8-1
8-2 How to set the key function of the outdoor unit...........................................................................................8-2
8-3 How to check the view mode using a tact switch.........................................................................................8-4
9. Test Operation..................................................................................................... 9-1
9-1 Auto Trial Operation....................................................................................................................................................9-1
9-1-1 Auto Trial Operation Synopsis..................................................................................................................9-1
9-1-2 Auto Trial Operation functions.................................................................................................................9-3
9-1-3 How to troubleshoot of the "Undetermined"....................................................................................9-4
9-1-4 Auto Trial Operation Error Code ........................................................................................................... 9-13
9-2 Amount of refrigerant automatically checking............................................................................................9-14
10. Reference Sheet ..............................................................................................10-1
10-1 Nomenclature.......................................................................................................................................................... 10-1

Samsung Electronics 1-1
1. Precautions
1-1 Precautions for the Service
OUse the correct parts when changing the electric parts.
– Please check the labels and notices for the model name, proper voltage, and proper current for the electric parts.
OFully repair the connection for the types of harness when repairing the product after breakdown.
– A faulty connection can cause irregular noise and problems.
OWhen disassembling or assembling, make sure that the product is laid down on a work cloth.
– Doing so will prevent scratching to the exterior of the rear side of the product.
OCompletely remove dust or foreign substances on the housing, connection, and inspection parts when performing repairs.
– This can prevent fire hazards for tracking, short, etc.
OPlease tighten the service valve of the outdoor unit and the valve cap of the charging valve as securely as possible by using
a monkey spanner.
OCheck whether the parts are properly and securely assembled after performing repairs.
– These parts should be in the same condition as before the repair.
1-2 Precautions for the Static Electricity and PL
OPlease carefully handle the PCB power terminal during repair and measurement when it is turned on since it is vulnerable
to static electricity.
– Please wear insulation gloves before performing PCB repair and measurement.
OCheck if the place of installation is at least 2m away from electronic appliances such as TV, video players, and stereos.
– This can cause irregular noise or degrade the picture quality.
OPlease make sure the customer does not directly repair the product.
– Arbitrary dismantling may result in electric shock or fire.
1-3 Precautions for the Safety
ODo not pull or touch the power plug or the subsidiary power switch with wet hands.
– This may result in electric shock or fire.
OIf the power line or the power plug is damaged, then it must be changed since this is a hazard.
ODo not bend the wire too much or position it so that it can be damaged by a heavy object on top.
– This may result in electric shock or fire.
OThe use of multiple electric outlets should be prohibited.
– This may result in electric shock or fire.
OGround the connection if it is necessary.
– The connection must be grounded if there is any risk of electrical short due to water or moisture.
OUnplug the power or turn off the subsidiary power switch when changing or repairing electrical parts.
– Doing so will prevent electric shock.
OExplain to workers that the battery for the remote control needs to be separated for storage purposes when the product
will not be used for a long time.
– This can cause a problem for the remote control since battery fluid may trickle out.

1-2 Samsung Electronics
1-4 Precautions for Handling Refrigerant for Air Conditioner
Environmental Cautions: Air pollution due to gas release
OSafety Cautions
If liquid gas is released, then body parts that come into contact with it may experience frostbite/blister/numbness.
If a large amount of gas is released, then suffocation may occur due to lack of oxygen. If the released gas is heated, then noxious
gas may be produced by combustion.
OContainer Handling Cautions
Do not subject container to physical shock or overheating. (Flowage is possible while moving within the regulated pressure.)
1-5 Precautions for Welding the Air Conditioner Pipe
ODangerous or flammable objects around the pipe must be removed before the welding.
OIf the refrigerant is kept inside the product or the pipe, then remove the refrigerant prior to welding.
If the welding is carried out while the refrigerant is kept inside, the welding cannot be properly performed. This will also produce
noxious gas that is a health hazard. This leakage will also explode with the refrigerant and oil due to an increase in the refrigerant
pressure, posing a danger to workers.
OPlease remove the oxide produced inside the pipe during the welding with nitrogen gas.
Using another gas may cause harm to the product or others.
1-6 Precautions for Additional Supplement of Air Conditioner Refrigerant
OPrecisely calculate the refrigerant by using a scale and S-net, and proceed with the test operation.
Excessive supplement can cause harm to the product since it can cause an inflow of the liquid refrigerant into the compressor.
ODo not heat the refrigerant container for a forced injection.
This may cause harm to the product or others since the refrigerant container may burst.
ODo not operate the product after removing the product safety pressure switch and sensor.
If the product is blocked inside, then this may cause harm to the product or others due to the excess pressure increase of the
refrigerant gas.
1-7 Other Precautions
OThere should be no leakage of the pipes after installation. When withdrawing the refrigerant, the compressor should be
stopped before removing the connecting pipe.
If the compressor is operating while the refrigerant pipe is not correctly connected and the service valve is opened, then
air and other substances can enter the pipe. The interior of the refrigerant cycle may then build up excessive high pressure
resulting in explosion and damage.

Samsung Electronics 2-1
2. Product Specifications
2-1 The Feature of Product
2-1-1 Feature
Q Dual SSC SystemTechnology
When load changes, capacity amendment that is soft by continuous operation of Dual Inverter is available.
Q Dual Smart Inverter System
DSC System
Digital base Inverter base
. DVI variable + DVI constant speed
. AC Motor
. 2 generation, Vapor Injection
. Dual Smart Inverter : SSC + SSC
. BLDC Inverter Motor (20~160Hz driving)
. 3 generation, Vapor Injection
(Performance maximization of low temperature heating)
DSI System
High Pressure Refrigerant Outlet
Medium Pressure
Refrigerant Injection
Low Pressure
Refrigerant Inlet
Low Pressure
Refrigerant Inlet
3 generation,
Vapor Injection 3 generation,
Vapor Injection
Low Pressure
Refrigerant Inlet
High Pressure Refrigerant Outlet High Pressure Refrigerant Outlet
Medium Pressure
Refrigerant Inlet
Capacity
Variable
ŶCompressor driving : When load changes, is variable by fast inverter frequency.
ŶAmenities elevation : ᇹ0.5°C
Step 1
ON OFF
Step 2
Step 3 Step 4
ON OFF
ON ON ON ON

Product Specications
2-2 Samsung Electronics
Feature
(cont.)
Q Inverter circuit refrigerant cooling technology
Applied high eciency refrigerant cooling circuit. Secured stable Inverter PCB cooling performance.
- Air cooling method : When natural convection / electric heat performance is low and is high load, eciency is fallen.
- Refrigerant cooling system : Forced circulation / electric heat performance is high and control of (thermal conductivity is
10 times higher than air) load is available.
Cooling of
inverter circuit
Refrigerant cooling system :
It is cooling technology of inverter circuit that use
refrigerating cycle technology.

Product Specications
Samsung Electronics 2-3
2-1-2 Changes in comparison to basic mode
Changed
part
Changed item
and feature Basic After changed
Control Box
structure
Monolayer structure ࣖDouble
Layer Structure
- Inverter technology integration
(Inverter control circuit
composition)
- C/Box volume maximum use
Built-in type Controller embodi-
ment
- Integrated power supply
+ control unit
- Piping service easiness
Q Control Box & PCB
Changed
part
Changed item
and feature Basic After changed
CABINET
Change the color :
TOUCH GRAY
ࣖEARTH BROWN
Wire Harness installation part
change
LOGO change

Product Specications
2-4 Samsung Electronics
Changes in comparison to basic mode (cont.)
Changed
part
Changed item
and feature Basic After changed
Main PCB
Change Main PCB
- Separation for load / control.
- Option resistance delete by model.
(standardization)
- When do PCB replace, need option
download.
Hub PCB
Hub PCB newly application
- Separation for load / control.
- Enhanced fixing of load / sensor wire.
FAN PCB
Use controller of 3 phase power
- Prevented phase unbalance.
- Temperature protection of IPM.
Inverter PCB
(Compressor
Control PCB)
Applied inverter Compressor
- Refrigerant cooling method
- Magnet S/W
ױ Did Power Relay mount to PCB.
EMI PCB 3 phase power EMI PCB
- Fuse mount -
Communication
Terminal block
Did CommunicationTerminal block
mount to PCB.

Product Specications
Samsung Electronics 2-5
Changes in comparison to basic mode (cont.)
Changed
part
Changed item
and feature Basic After changed
Pipe
Cooling
New Pipe Cooling for cooling of
inverter PCB. Unapplied
Changed
part
Changed item
and feature Basic After changed [HP] After changed [HR]
Tube
structure
New inverter
cycle technology
application
New piping
Q PIPE COOLING
Q TUBE
Refrigerant cooling system : It is cooling technology of
inverter circuit that use refrigerating cycle technology.
Cooling of
inverter circuit

Product Specications
2-6 Samsung Electronics
2-1-3 Structure of product
AM072FXVAF6AM072FXVAJ*
AM096FXVAF6
AM120FXVAF6
AM144FXVAF6
AM096FXVAJ6
AM120FXVAJ6
AM144FXVAJ6
TRANS BOX
TRANS BOX

Product Specications
Samsung Electronics 2-7
2-2 Product Specifications
2-2-1 Outdoor Unit
TYPE DVM S HP - 208-230V
Model AM072FXVAFH/AA AM096FXVAFH/AA AM120FXVAFH/AA AM144FXVAFH/AA
Mode HP HP HP HP
Power Ø,V,Hz 3/208-230/60 3/208-230/60 3/208-230/60 3/208-230/60
Capacity
Cooling (Nominal) Btu/h 72,000 96,000 120,000 144,000
Cooling (Rated) Btu/h 69,000 92,000 114,000 138,000
Heating (Nominal) Btu/h 81,000 108,000 135,000 162,000
Heating (Rated) Btu/h 77,000 103,000 129,000 154,000
Power Consumption
(Nonducted, AHRI)
Cooling W 5,350 6,680 9,140 12,340
Heating W 5,430 7,130 9,520 12,400
current consumption
(Nonducted, AHRI)
Cooling A 14.6 18.2 24.9 33.7
Heating A 14.8 19.5 26.0 33.8
EER
(Nonducted, AHRI)
Cooling Btu/Wh 12.9 13.8 12.5 11.2
Heating W/W 4.15 4.23 3.97 3.64
IEER(AHRI) Cooling W/W 23.0 26.0 24.2 22.7
Compressor
Model - DS-GB052FBVASG DS-GB052FBVASG DS-GB052FBVASG DS-GB052FBVASG
Output kW 33.1 33.1 33.1 33.1
Excluded Volume cc/rev 52.0 52.0 52.0 52.0
Capacity Btu/h 58,000 58,000 58,000 58,000
Quantity EA 1 2 2 2
Lubricant oil Type Liter FV68D(PVE) FV68D(PVE) FV68D(PVE) FV68D(PVE)
Factory Charging Liter 3.9 6.2 6.2 6.2
Refrigerant Type - R410A R410A R410A R410A
Factory Charging lb 12.13 16.31 16.31 19.18
FAN
Ø mm 700 575 575 575
MAX STEP - 19 29 29 31
CODE - DB31-00298A DB94-03285C DB94-03285C DB94-03285C
MAX RPM STEP(RPM) 800 1050 1050 1100
Quantity EA 1 2 2 2
 CMM 205 260 260 270
Piping
Connections
Gas Inch 3/4"(19.05) 7/8"(22.22) 1+1/8"(28.58) 1+1/8"(28.58)
Dis. Gas Inch - - - -
Liquid Inch 3/8"(9.52) 3/8"(9.52) 1/2"(12.7) 1/2"(12.7)
DIMENSION
NET mm 880x1695x765 1295x1695x765 1295x1695x765 1295x1695x765
GROSS mm 948x1912x832 1363x1912x832 1363x1912x832 1363x1912x832
NET kg 190 278 278 293
GROSS kg 206 300 300 312
Operating Temp.
Range
Cooling ሥ23~118 23~118 23~118 23~118
Heating ሥ-4~75 -4~75 -4~75 -4~75
1. Proper form capacity standard of air conditioning
- Cooling capacity : It is figures that appear in indoor 80.6 ሥDB/66.2 ሥWB, outdoor 95 ሥDB, length 50m of piping, fall 0m standard.
- Heating capacity : It is figures that appear in indoor 68 ሥDB, outdoor 44.6 ሥDB, length 50m of piping, fall 0ft standard.
2. If proper form heating capacity is outdoor temperature 44.6 ሥstandard and outdoor temperature goes down by below zero,
heating capacity can drop according to temperature condition.
3. Need special load calculation in case of use by main heating in the winter, and please buy product for low temperature that heating effect excels at low temperature.
4. Maximum length between outdoor and indoor units allows up to 656ft (Equivalent length 722ft).
5. If the indoor unit is below, height length allows up to 361ft (If over 164ft, decide whether to install the PDM kit). If the outdoor unit is below, allowable height length is 131ft.

2-8 Samsung Electronics
Outdoor Unit(Continue)
TYPE DVM S HR - 208-230V
Model AM072FXVAFR/AA AM096FXVAFR/AA AM120FXVAFR/AA AM144FXVAFR/AA
Mode HR HR HR HR
Power Ø,V,Hz 3/208-230/60 3/208-230/60 3/208-230/60 3/208-230/60
Capacity
Cooling (Nominal) Btu/h 72,000 96,000 120,000 144,000
Cooling (Rated) Btu/h 69,000 92,000 114,000 138,000
Heating (Nominal) Btu/h 81,000 108,000 135,000 162,000
Heating (Rated) Btu/h 77,000 103,000 129,000 154,000
Power Consumption
(Nonducted, AHRI)
Cooling W 5,350 6,680 9,140 12,340
Heating W 5,430 7,130 9,520 12,400
Current consumption
(Nonducted, AHRI)
Cooling A 14.6 18.2 24.9 33.7
Heating A 14.8 19.5 26.0 33.8
EER
(Nonducted, AHRI)
Cooling Btu/Wh 12.9 13.8 12.5 11.2
Heating W/W 4.15 4.23 3.97 3.64
IEER(AHRI) Cooling W/W 23.0 26.0 24.2 22.7
Compressor
Model - DS-GB052FBVASG DS-GB052FBVASG DS-GB052FBVASG DS-GB052FBVASG
Output kW 33.1 33.1 33.1 33.1
Excluded Volume cc/rev 52.0 52.0 52.0 52.0
Capacity Btu/h 58,000 58,000 58,000 58,000
Quantity EA 1 2 2 2
Lubricant oil   OIL Liter FV68D(PVE) FV68D(PVE) FV68D(PVE) FV68D(PVE)
Factory Charging Liter 3.9 6.2 6.2 6.2
Refrigerant Type - R410A R410A R410A R410A
Factory Charging lb 12.13 16.31 16.31 19.18
FAN
Ø mm 700 575 575 575
MAX STEP - 19 29 29 31
CODE - DB31-00298A DB94-03285C DB94-03285C DB94-03285C
MAX RPM STEP(RPM) 800 1050 1050 1100
Quantity EA 1 2 2 2
 CMM 205 260 260 270
Piping
Connections
Gas Inch 3/4"(19.05) 7/8"(22.22) 1+1/8"(28.58) 1+1/8"(28.58)
Dis. Gas Inch 5/8"(15.88) 3/4"(19.05) 7/8"(22.22) 7/8"(22.22)
Liquid Inch 3/8"(9.52) 3/8"(9.52) 1/2"(12.7) 1/2"(12.7)
DIMENSION
NET mm 880x1695x765 1295x1695x765 1295x1695x765 1295x1695x765
GROSS mm 948x1912x832 1363x1912x832 1363x1912x832 1363x1912x832
NET kg 195 284 284 299
GROSS kg 211 303 303 318
Operating Temp.
Range
Cooling ሥ23~118 23~118 23~118 23~118
Heating ሥ-4~75 -4~75 -4~75 -4~75
1. Proper form capacity standard of air conditioning
- Cooling capacity : It is figures that appear in indoor 80.6 ሥDB/66.2 ሥWB, outdoor 95 ሥDB, length 50m of piping, fall 0m standard.
- Heating capacity : It is figures that appear in indoor 68 ሥDB, outdoor 44.6 ሥDB, length 50m of piping, fall 0ft standard.
2. If proper form heating capacity is outdoor temperature 44.6 ሥstandard and outdoor temperature goes down by below zero,
heating capacity can drop according to temperature condition.
3. Need special load calculation in case of use by main heating in the winter, and please buy product for low temperature that heating effect excels at low temperature.
4. Maximum length between outdoor and indoor units allows up to 656ft (Equivalent length 722ft).
5. If the indoor unit is below, height length allows up to 361ft (If over 164ft, decide whether to install the PDM kit). If the outdoor unit is below, allowable height length is 131ft.

Product Specications
Samsung Electronics 2-9
Outdoor Unit(Continue)
TYPE DVM S HP - 460V
Model AM072FXVAJH/AA AM096FXVAJH/AA AM120FXVAJH/AA AM144FXVAJH/AA
Mode HP HP HP HP
Power Ø,V,Hz 3/460/60 3/460/60 3/460/60 3/460/60
Capacity
Cooling (Nominal) Btu/h 72,000 96,000 120,000 144,000
Cooling (Rated) Btu/h 69,000 92,000 114,000 138,000
Heating (Nominal) Btu/h 81,000 108,000 135,000 162,000
Heating (Rated) Btu/h 77,000 103,000 129,000 154,000
Power Consumption
(Nonducted, AHRI)
Cooling W 5,350 6,600 9,190 12,340
Heating W 5,430 7,130 9,520 12,400
Current consumption
(Nonducted, AHRI)
Cooling A 7.3 9.0 12.5 16.8
Heating A 7.4 9.7 13.0 16.9
EER
(Nonducted, AHRI)
Cooling Btu/Wh 12.9 13.9 12.4 11.2
Heating W/W 4.15 4.23 3.97 3.64
IEER(AHRI) Cooling W/W 23.0 24.2 23.0 22.7
Compressor
Model - DS-GB052FAVA DS-GB066FAVASG DS-GB066FAVASG DS-GB052FAVA
Output kW 33.1 36.8 36.8 33.1
Excluded Volume cc/rev 52.0 65.8 65.8 52.0
Capacity Btu/h 58,000 73,000 73,000 58,000
Quantity EA 1 1 1 2
Lubricant oil   OIL Liter FV68D(PVE) FV68D(PVE) FV68D(PVE) FV68D(PVE)
Factory Charging Liter 3.9 3.9 3.9 6.2
Refrigerant Type - R410A R410A R410A R410A
Factory Charging lb 12.13 16.31 16.31 19.18
FAN
Ø mm 700 575 575 575
MAX STEP - 19 29 29 31
CODE - DB31-00298A DB94-03285C DB94-03285C DB94-03285C
MAX RPM STEP(RPM) 800 1050 1050 1100
Quantity EA 1 2 2 2
 CMM 205 260 260 270
Piping
Connections
Gas Inch 3/4"(19.05) 7/8"(22.22) 1+1/8"(28.58) 1+1/8"(28.58)
Dis. Gas Inch - - - -
Liquid Inch 3/8"(9.52) 3/8"(9.52) 1/2"(12.7) 1/2"(12.7)
DIMENSION
NET mm 880x1695x765 1295x1695x765 1295x1695x765 1295x1695x765
GROSS mm 948x1912x832 1363x1912x832 1363x1912x832 1363x1912x832
NET kg 190 278 278 293
GROSS kg 206 300 300 312
Operating Temp.
Range
Cooling ሥ23~118 23~118 23~118 23~118
Heating ሥ-4~75 -4~75 -4~75 -4~75
1. Proper form capacity standard of air conditioning
- Cooling capacity : It is figures that appear in indoor 80.6 ሥDB/66.2 ሥWB, outdoor 95 ሥDB, length 50m of piping, fall 0m standard.
- Heating capacity : It is figures that appear in indoor 68 ሥDB, outdoor 44.6 ሥDB, length 50m of piping, fall 0ft standard.
2. If proper form heating capacity is outdoor temperature 44.6 ሥstandard and outdoor temperature goes down by below zero,
heating capacity can drop according to temperature condition.
3. Need special load calculation in case of use by main heating in the winter, and please buy product for low temperature that heating effect excels at low temperature.
4. Maximum length between outdoor and indoor units allows up to 656ft (Equivalent length 722ft).
5. If the indoor unit is below, height length allows up to 361ft (If over 164ft, decide whether to install the PDM kit). If the outdoor unit is below, allowable height length is 131ft.

Product Specications
2-10 Samsung Electronics
Outdoor Unit(Continue)
TYPE DVM S HR - 460V
Model AM072FXVAJR/AA AM096FXVAJR/AA AM120FXVAJR/AA AM144FXVAJR/AA
Mode HR HR HR HR
Power Ø,V,Hz 3/460/60 3/460/60 3/460/60 3/460/60
Capacity
Cooling (Nominal) Btu/h 72,000 96,000 120,000 144,000
Cooling (Rated) Btu/h 69,000 92,000 114,000 138,000
Heating (Nominal) Btu/h 81,000 108,000 135,000 162,000
Heating (Rated) Btu/h 77,000 103,000 129,000 154,000
Power Consumption
(Nonducted, AHRI)
Cooling W 5,350 6,600 9,190 12,340
Heating W 5,430 7,130 9,520 12,400
current consumption
(Nonducted, AHRI)
Cooling A 7.3 9.0 12.5 16.8
Heating A 7.4 9.7 13.0 16.9
EER
(Nonducted, AHRI)
Cooling Btu/Wh 12.9 13.9 12.4 11.2
Heating W/W 4.15 4.23 3.97 3.64
IEER(AHRI) Cooling W/W 23.0 24.2 23.0 22.7
Compressor
Model - DS-GB052FAVA DS-GB066FAVASG DS-GB066FAVASG DS-GB052FAVA
Output kW 33.1 36.8 36.8 33.1
Excluded Volume cc/rev 52.0 65.8 65.8 52.0
Capacity Btu/h 58,000 73,000 73,000 58,000
Quantity EA 1 1 1 2
Lubricant oil Type Liter FV68D(PVE) FV68D(PVE) FV68D(PVE) FV68D(PVE)
Factory Charging Liter 3.9 3.9 3.9 6.2
Refrigerant Type - R410A R410A R410A R410A
Factory Charging lb 12.13 16.31 16.31 19.18
FAN
Ø mm 700 575 575 575
MAX STEP - 19 29 29 31
CODE - DB31-00298A DB94-03285C DB94-03285C DB94-03285C
MAX RPM STEP(RPM) 800 1050 1050 1100
Quantity EA 1222
 CMM 205 260 260 270
Piping
Connections
Gas Inch 3/4"(19.05) 7/8"(22.22) 1+1/8"(28.58) 1+1/8"(28.58)
Dis. Gas Inch 5/8"(15.88) 3/4"(19.05) 7/8"(22.22) 7/8"(22.22)
Liquid Inch 3/8"(9.52) 3/8"(9.52) 1/2"(12.7) 1/2"(12.7)
DIMENSION
NET mm 880x1695x765 1295x1695x765 1295x1695x765 1295x1695x765
GROSS mm 948x1912x832 1363x1912x832 1363x1912x832 1363x1912x832
NET kg 195 284 284 299
GROSS kg 211 303 303 318
Operating Temp.
Range
Cooling ሥ23~118 23~118 23~118 23~118
Heating ሥ-4~75 -4~75 -4~75 -4~75
1. Proper form capacity standard of air conditioning
- Cooling capacity : It is figures that appear in indoor 80.6 ሥDB/66.2 ሥWB, outdoor 95 ሥDB, length 50m of piping, fall 0m standard.
- Heating capacity : It is figures that appear in indoor 68 ሥDB, outdoor 44.6 ሥDB, length 50m of piping, fall 0ft standard.
2. If proper form heating capacity is outdoor temperature 44.6 ሥstandard and outdoor temperature goes down by below zero,
heating capacity can drop according to temperature condition.
3. Need special load calculation in case of use by main heating in the winter, and please buy product for low temperature that heating effect excels at low temperature.
4. Maximum length between outdoor and indoor units allows up to 656ft (Equivalent length 722ft).
5. If the indoor unit is below, height length allows up to 361ft (If over 164ft, decide whether to install the PDM kit). If the outdoor unit is below, allowable height length is 131ft.

Product Specications
Samsung Electronics 2-11
2-3 Accessory and Option Specifications
2-3-1 Accessories
Picture Classification Model Name Remark
Y-Joint
MXJ-YA1509M
15.0 kW and below
MXJ-YA2512M
Over 15.0 kW~40.6 kW and below
MXJ-YA2812M
Over 40.6 kW~46.4 kW and below
MXJ-YA2815M
Over 46.4 kW~69.6 kW and below
MXJ-YA3419M
Over 69.6 kW~98.6 kW and below
MXJ-YA4119M
Over 98.6 kW~139.2 kW and below
MXJ-YA4422M
Over 139.2 kW
Y-Joint
(Only H/R)
MXJ-YA1500M
23.2 kW and below
MXJ-YA2500M
Over 23.2 kW~69.6 kW and below
MXJ-YA3100M
Over 69.6 kW~139.2 kW and below
MXJ-YA3800M
139.2 kW and below
Distribution header
MXJ-HA2512M
46.4 kW and below (for 4 rooms)
MXJ-HA3115M
69.6 kW and below (for 8 rooms)
MXJ-HA3819M
Over 69.6 kW (for 8 rooms)
Y-Joint -Outdoor Unit
MXJ-TA3819M
139.2 kW and below
MXJ-TA4422M
145 kW and below
Y-Joint
(Only H/R)-Outdoor Unit
MXJ-TA3100M
139.2 kW and below
MXJ-TA3800M
145 kW and Over
MCU
(Mode Control Unit)
MCU-S6NEE1N
6 ROOM
MCU-S4NEE1N
4 ROOM
MCU-S4NEE2N
4 ROOM
EEV KIT (1 Room)
MEV-E24SA
Applty to products without EEV
(Wall mount & Ceiling)
MEV-E32SA
EEV KIT (2 Room)
MXD-E24K132A
MXD-E24K200A
MXD-E32K200A
MXD-E24K232A
EEV KIT (3 Room)
MXD-E24K132A
MXD-E24K300A
MXD-E32K224A
MXD-E32K300A

Samsung Electronics 3-1
3-1 Necessary Tools
3. Disassembly and Reassembly
OFor “disassembly and assembly” DVM PLUS Ⅳindoor unit, please refer to the products with the same structures.
Only those products that are not specified elsewhere are described here.
Item Remark
+SCREW DRIVER
MONKEY SPANNER
-SCREW DRIVER
NIPPER
ELECTRIC MOTION DRIVER
L-WRENCH

3-2 Samsung Electronics
No. Parts Procedure Remark
1 Electrical
equipment Part
1) 14 screws that is fixing CABINET remove.(Use +
Screw driver)
2) Remove 4 screws that is fixing and separate
Cover Control Box.
(Use + Screw driver)
3) Power, Compressor, Valve, Motor, Sensor con-
nector connected to ASSY PCB remove.
3-2 Disassembly and Reassembly
3-2-1 AM072FXVA66

Disassembly and Reassembly
Samsung Electronics 3-3
No. Parts Procedure Remark
4) 2 screws had fixed in terminal block cover
when change power terminal block, commu-
nication terminal block remove.
5) 2 screws had fixed in terminal block after
remove 4 screws had fixed to Cabinet for ter-
minal block protection remove.
6) 5 screws had fixed to Front part remove.