Samsung AR09JVSSEWKNED User manual

AIR CONDITIONER CONTENTS
SPLIT-TYPE AIR CONDITIONER
INDOOR UNIT
Model Code:
snoituacerP.1
2. Product Specifications
3. Alignment and Adjustments
4. DisassemblyandReassembly
5. Control Exploded Views and Part List
6. Electrical Parts List
7. Wiring Diagram
8. PCB Diagram
9. Operating Instructions
10. Troubleshooting
11. Block Diagram
12. Reference Sheet
Basic Code:
OUTDOOR UNIT
AR12JVFSWWKNAF AR12JVFSWWKXAF
AR09JVSSEWKNED
AR12JVSSEWKNED
AR12JVSSCWKNCB
AR09JVSSEWKXED
AR12JVSSEWKXED
AR12JVSSCWKXCB

Samsung Electronics 1
Contents
1. Precautions ············································································································· 1-1
1-1 Installing the air conditioner·························································································································· 1-1
1-2 Power supply and circuit breaker················································································································· 1-1
1-3 During operation ················································································································································ 1-1
1-4 Disposing of the unit········································································································································· 1-2
1-5 Others ······································································································································································ 1-2
2. Product Specifications······························································································· 2-1
2-1 The Feature of Product ····································································································································· 2-1
2-2 Product Specifications ······································································································································ 2-2
2-3 The Comparative Specifications of Product····························································································· 2-6
2-4 Accessory and Option Specifications ········································································································· 2-8
3. Alignment and Adjustments ········································································ 3-1
3-1 Test Mode······························································································································································· 3-1
3-2 Outdoor LED Display Error and Check Method ····················································································· 3-2
3-3 Setting Option Setup Method······················································································································· 3-5
3-4 Setting Option Setup Method······················································································································· 3-9
4. Disassembly and Reassembly ······································································ 4-1
4-1. Indoor Unit···························································································································································· 4-2
4-2. Outdoor Unit························································································································································ 4-12
5. Disassembly WIFI··························································································· 5-1
5-1 WIFI Case································································································································································· 5-1
5-2 ASSY CONTROL IN ·············································································································································· 5-2
5-3 Assy Control Out ················································································································································ 5-4
6. Electrical Parts List ························································································ 6-1
6-1 INDOOR MAIN PCB (DB92-02873A)············································································································· 6-1
6-4 OUTDOOR MAIN PBA(DB92-02866A) - 12K/18K ·····················································································
6-7 OUTDOOR MAIN PBA(DB90-02877A) - 24K······························································································ 6-11
6-8 ASSY WIFI PCB ······················································································································································ 6-20
7. Wiring Diagram······························································································ 7-1
7-1 Indoor Unit····························································································································································· 7-1
7-2 Outdoor Unit ························································································································································ 7-2
7-3 ASSY WIFI KIT ························································································································································ 7-3
6-5

2Samsung Electronics
Contents
8. PCB Diagram ·································································································· 8-1
8-1 Indoor Unit····························································································································································· 8-1
8-2 Outdoor PCB ························································································································································ 8-2
8-3 Wire connecting the indoor unit terminal blocks················································································· 8-8
9. Operating Instructions·················································································· 9-1
9-1 Name of Each Part ·············································································································································· 9-1
9-2 Wireless Remote Control-Buttons and Display······················································································· 9-2
10. Troubleshooting ··························································································10-1
10-1 Items to be checked first······························································································································· 10-1
10-2 Communication Error····································································································································· 10-2
10-3 PCB Inspection Method································································································································· 10-37
10-4 ASSY WIFI KIT Inspection Method············································································································· 10-39
11. Block Diagram ·····························································································11-1
11-1 Indoor unit ·························································································································································· 11-1
11-2 Outdoor unit······················································································································································· 11-2
12. Reference Sheet···························································································12-1
12-1 Low Refrigerant Pressure Distribution····································································································· 12-1
12-2 Pressure & Capacity mark······························································································································ 12-1
12-3 Q & A for Non-trouble····································································································································· 12-2
12-4 Cleaning /Filter Change································································································································· 12-5
12-5 Installation··························································································································································· 12-6
12-6 Installation Diagram of Indoor Unit and Outdoor Unit···································································· 12-7

Samsung Electronics 1-1
1. Precautions
1-1 Installing the air conditioner
O Uses should not install the air conditioner by themselves.
Ask the dealer or authorized company to install the air conditioner except window-type air conditioner in U.S.A and Canada.
O If you don't install the air conditioner properly, it may cause a fire, a water leakage or an electric shock.
O You must install the air conditioner according to the national wiring regulations and safety regulations.
O
Install the indoor unit higher than 2.5m from the floor to avoid the injury caused by the operation of the fan.
(except the window-type air conditioner)
O The manufacturer is not responsible for any accidents or injury caused by an incorrect installation.
O When installing the built-in type air conditioner, keep all electric cables such as the power cable and the connection cord in
pipes, ducts, or cable channels to protect them from the danger of impact or any other incidents.
1-2 Power supply and circuit breaker
O If the power cord of the air conditioner is damaged, it must be replaced by the manufacturer or a qualified person in order
to avoid a hazard.
O The air conditioner must be plugged into an independent circuit if applicable or connect the power cable to the auxiliary circuit
breaker.
An all pole disconnection form the power supply must be incorporated in the fixed wiring with a contact opening of>3mm.
O Do not extend an electric cord to the air conditioner.
O The air conditioner must be plugged in after you complete the installation.
1-3 During operation
ODo not repair the air conditioner at your discretion.
It is recommended to contact a service center directly.
ONever spill any kind of liquid on the air conditioner.
If this happens, turn off the air conditioner and contact an authorized service center.
O Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury.
Keep children away from the air conditioner.
O Do not place any obstacles in front of the air conditioner.
ODo not spray any kind of liquid into the indoor unit. If this happens, turn off the air conditioner and contact a service center.
OMake sure that the air conditioner is well ventilated at all times.
Do not place a cloth or other materials over it.
O Remove the batteries if you don't use the remote control for a long time. (If applicable)
O Use the remote control within 7 meters from the indoor unit. (If applicable)

1-2 Samsung Electronics
1-4 Disposing of the unit
OBefore the throwing out the air conditioner, remove the batteries from the remote control.
OWhen you dispose of the air conditioner, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out
and cause air pollution. When it contacts with your skin, it can cause skin injury.
OThe package of the air conditioner should be recycled or disposed of properly for environmental reasons.
1-5 Others
ONever store or load the air conditioner upside down or sideways to prevent the damage to the compressor.
OYoung children or infirm persons should be always supervised when they use the air conditioner.
OMax current is measured according to IEC standard for safety.
OCurrent is measured according to ISO standard for energy efficiency.

Samsung Electronics2-1
2. Product Specifications
2-1 The Feature of Product
2 step cooling
- Get cool quickly and keep cool comfortably without shivering
Single user mode
- No worrying about the electricity bill, even using it when you're alone.
Crystal gloss design
- Uniquely stylish and innovative design to enhance your life and home
Smart Wi-Fi
- Control air conditioner anytime and anywhere
Smart Installation
Smart Check
- Don’t worry about the trouble-shooting in your home
Triple Protector Plus
- Use longer without damage in unsuitable conditions
Easy Installation
- Secure the easy Installation of Indoor unit and pipe connection
Easy Filter
- Get the confidence that it’s perfectly installed

2-2 Samsung Electronics
Indoor Unit Outoor Unit Indoor Unit Outoor Unit Indoor Unit Outoor Unit
Wall-mounted Wall-mounted Wall-mounted Wall-mounted Wall-mounted Wall-mounted
Cooling KW
Heating (Low/Std/Max)
Cooling Hz
Heating (Low/Std/Max)
声压 42/40 53 44/42 53 44/42 53
声功率 - - - - - -
Cooling
Heating
ph-V-Hz
Cooling
Heating
Cooling
Heating
Cooling
Heating
Gross Dimension
W*D*H mm 886*317*335 844*622*353 886*317*335 844*622*353 886*317*335 844*622*353
kg 9.8 26 9.8 26 9.8 26
Liquid mm
Gas mm
L*D
Type
Type
Rated Output(W)
Type CROSS-FLOW PROPELLER CROSS-FLOW PROPELLER CROSS-FLOW PROPELLER
motor Type BLDC BLDC BLDC BLDC BLDC BLDC
2ROW x 14STEP x L635mm, 2-2path 1ROW x 49STEP x 703mm 2ROW x 14STEP x L635mm, 2-2path 1ROW x 49STEP x 703mm 2ROW x 14STEP x L635mm, 2-2path 1ROW x 49STEP x 703mm
cc
g
R410A
Oil Type
-
Blower
Motor
AC motor
-
Heating
-
Proterction Device(OLP)
-
Operation condition range
Cooling
16~46(cooling)
Freezer Oil Capacity
-
Refrigerant to Change(R410A)
730g
Heat Exchanger
Refrigerant Control Unit
9.52 (3/8 inch)
Drain Hose
550±20
Size
Weight(Net)
Refrigerant Pipe
6.35 (1/4 inch)
Compressor
UG9A090LNAEPSS
-
Power
1phase , 220V / 60Hz
Pow
Power Consumtion
KW
(Low/Std/Max)
0.46/0.73/1.25
Power Factor
%
(Low/Std/Max)
70/90/90
-
Operating Current
A
(Low/Std/Max)
2.8/3.5/4.3
-
MODEL
AR09JVSSEWK/ED
Type
Running Frequency
35/49/60
-
Performance
Capacity
1.5/2.64/3.2
-
-
Noise
dB
(H/L)
Energy Efficiency
Ratio
W/W
(Std)
3.62
3.23
-
1phase , 220V / 60Hz
0.37/1.09/1.25
-
AR12JVSSEWK/ED
1.18/3.52/4.0
-
24/71/77
-
2.0/5.0/6.0
-
70/90/90
-
6.35 (1/4 inch)
-
730g
6.35 (1/4 inch)
9.52 (3/8 inch)
-
AR12JVSSCWK/CB
1.5/3.52/4
-
35/71/82
-
3.41
-
1phase , 220V / 60Hz
0.46/1.03/1.25
16~46(cooling)
-
-
-
16~46(cooling)
-
-
-
R410A
-
730g
9.52 (3/8 inch)
550±20
UG9A090LNAEPSS
AC motor
-
-
-
R410A
UG9A090LNAEPSS
AC motor
-
2.8/5.7/6.7
-
70/90/90

2-3Samsung Electronics
2-3 The Comparative Specifications of Product
Develop Model Develop Model Develop Model
AR09JVSSEWK/ED AR12JVSSEWK/ED AR12JVSSCWK/CB
Indoor Unit
Outdoor Unit
Indoor Unit 9.8 9.8 9.8
Outdoor Unit 26 26 26
Indoor Unit 886*317*335 886*317*335 886*317*335
Outdoor Unit 844*622*353 844*622*353 844*622*353
Indoor Unit 42(UT)/40(T) 44(UT)/42(T) 44(UT)/42(T)
Outdoor Unit 53 53 53
Air Purifying System Filter FULL HDFILTER FULL HDFILTER FULL HDFILTER
Noise
MODEL
ITEM
Design
Net Weight
Outer Dimension

2-8 Samsung Electronics
2-4 Accessory and Option Specifications
krameRYT'Q.oN-edoCsnoitpircseDmetI
InstallationPlate
DB90-07732A
1
Indoorunitcase
ASSY WIRELESS REMOCON 1
Batteries for Remote controller
4301-000121
2
User’s&Installation Manual
CAP-SCREW
DB67-01404B
2
M4 x 16 TappedScrews
DB97-11984A
-
DrainPlug
DB67-20011A
-
Outdoorunitcase
Rubber Leg
DB73-20134A
4
DB68-04932A(09K,12K ED)
DB68-04935A(12K CB)
1
DB93-14643C
HOLDER REMOCON
DB61-06087A
-

Samsung Electronics 3-1
3. Alignment and Adjustments
3-1 Test Mode
Q How to Approach Test Mode
You can approach the test mode by pressing the on/off switch of
indoor unit for 5 seconds.
Q Test mode operation option
After installing the air conditioner, check whether each subordinate is normally operated or not by operating the test mode.
●When an Error occurs, display the Error Mode.
●Operation Mode : Cool mode. operate the cool mode by operating the compressor by force without the compressor ON/OFF
according to the set temperature/indoor temperature. (Do not follow the antifreeze control)
●Up-down louver : Up-down swing mode
●Indoor Fan : Turbo
● Because the teat mode operate the cool mode by force not related to the set temperature / indoor
temperature, check whether each subordinate is operated normally or not after completing installation
and must turn off the power of the air conditioner.
Note

3-2 Samsung Electronics

Samsung Electronics 3-3
3-2-2 OutdoorLED DisplayErrorandCheckMethod (12K/18K/24K)
LED ON, LED OFF, LED BLINKING

Samsung Electronics3-5
3-3 Setting Option Setup Method
Step 2
Enter the Options Setup mode and select your options asscording to the following procedure.
ex) Option No. :
Note :
SEG1, SEG7, SEG13, SEG19 need not to be pressed in, so in fact the Option No. we should press in is as below.
Step 1
Enter the Option Setup mode.
1. Tack out the batteries of remote control.
2. Press the temperature button simultaneously and insert the battery again.
3. Make sure the remote control display shown as .
SEG1 SEG2SEG3 SEG4 SEG5 SEG6SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
SEG25 SEG26SEG27 SEG28 SEG29SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 SEG36 SEG37 SEG38 SEG39 SEG40 SEG41 SEG42 SEG43 SEG44 SEG45 SEG46 SEG47 SEG48

3-6Samsung Electronics
Step 4
Pressing the ON/OFF button ( ) .
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ’’Ding’’or ’’Diriring’’is heard
and the OPERATION ICON( ) lamp of the display is ickering at the same time, then the input of option is completed.
(If the deriving sound isn’t heard, try again pressing the ON/OFF button.)
Press the Mode Selection key to set the display part and check the display part.
→The display part shows like below when each time you press Mode button.
Step 3
Upon completion of the selection, check you made right selections.

Samsung Electronics3-7
Step1(Enter the Option Setup mode) is executed.
(Seg25 ~ 48 for setting remote control Setup)
PushtheModebutton to setthe display panerl to 2.
Every time you pushthebutton, the display panel reads
...
repeatedly.
Push the Mode button toset the display panerl to1.
Every time you pushthebutton, the display panel reads
...repeatedly.
Step 5
Enter the Options Setup mode and select your options asscording to the following procedure.

3-8 Samsung Electronics
Press the Mode Selection key to set the display part and check the display part.
→The display part shows like below when each time you press Mode button.
Step 6
Upon completion oftheselection,check you made rightselections.
Step 7
Pressingthe ON/OFF button ( ) .
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ’’Ding’’or ’’Diriring’’is hea
and the OPERATION ICON( ) lamp of the disp ame time, then the input of option is completed.
(If the deriving sound isn’t heard, try again pressing the ON/OFF button.)
Step 8
Unitope ration test-run.
First : Remove the battery from the remote control.
Second : Re-insert the battery into the remote control.
Third : Press ON/OFF key with the direction of remote control for set.
■Error mode
1. If all lamps of indoor uni ickering, Plug out, plug in power plug again and press ON/OFF key to retry.
2. If the unit is not working properly or all lamps are continuously after setting the option code, see if the c
orrect option code is
set up for its model.
□Option Items
Model
AR09JVSSEWK/ED
AR12JVSSEWK/ED
AR12JVSSCWK/CB
Option
000001-131209-21888A-300000
000002-171229-21888A-300000
000002-131229-21888A-300000

Samsung Electronics 4-1
4. Disassembly and Reassembly
Q Necessary Tools
Item Remark
+SCREW DRIVER
MONKEY SPANNER
- SCREW DRIVER

4-2 Samsung Electronics
No Parts Procedure Remark
1 PANEL-FRONT 1) Stop the driving of air conditioner and shut off
main power supply.
2) Detach FILTER PRE from the PANEL FRONT.
3) Cover Panel is assembled on bottom of indoor
unit as shown in the figure.
Remove the Cap Screw as shown on the right
side and then remove the screw and separate
the Cover Panel.
4-1. Indoor Unit

Samsung Electronics 4-3
No Parts Procedure Remark
4) Cover Panel is fixed to body by Hook in center
area and side area.
5) Separate the hook after pushing both end of
Cover Panel as shown in the figure.
(Watch out for the damage of the hook)
6) Raise front part upward obliquely as shown in
the figure and then remove the hooks.
Center area
Side area Side area
HOOK
9/12K
18/24/30K

4-4 Samsung Electronics
No Parts Procedure Remark
Caution:
Assembly of Cover Panel after service end.
-
Reassembly is in the reverse order of the
removal.
- Piping and drain hose must be careful not to
damage and Progress must be done with both
hands.
Hook (Side)
Hook (Center)
Screw
Cap Screw