Samsung SCH-N415 User manual

* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
World Wide Web
http://www.samsungmobile.com
Printed in KOREA
Code No.: GH68-XXXXX
English. 08/2004. Rev.1.0
ELECTRONIC
S
PORTABLE CELLULAR
TELEPHONE
SCH-N415
User’s Manual
Please read this manual before operating your
phone, and keep it for future reference.

3
Table of contents
Important safety precautions .......................6
Unpacking.....................................................8
Your phone ...................................................9
Phone layout....................................................... 9
Display.............................................................. 12
Service light ...................................................... 14
Getting started............................................15
Using the battery................................................ 15
Switching on or off the phone............................... 19
Using the soft keys............................................. 20
Your phone’s modes............................................ 21
Call functions..............................................23
Making a call...................................................... 23
Ending a call...................................................... 24
Emergency dialing.............................................. 24
Using the recent call logs..................................... 25
Making a call from Contacts ................................. 25
Prepend dialing .................................................. 26
Speed dialing..................................................... 26
4-digit dialing..................................................... 28
Pause dialing ..................................................... 28
Voice dialing ...................................................... 31
Adjusting the volume during a call........................ 33
Answering a call................................................. 34
Silencing a call ringer.......................................... 35
Viewing missed calls ........................................... 35
Options during a call........................................... 36
Using caller ID ................................................... 37
Call forwarding................................................... 37
Call waiting........................................................ 38
Three-way calling............................................... 39
Entering text...............................................40

Table of contents
4
Changing the text input mode.............................. 41
Using T9 (English) mode...................................... 42
Using Alphabet mode .......................................... 44
Using Symbol mode............................................ 46
Using Number mode ........................................... 46
Using the menus .........................................48
Accessing a menu function by scrolling.................. 48
Using shortcuts .................................................. 49
List of menu functions......................................... 50
Downloads ..................................................54
Downloading multimedia files............................... 54
Changing the browser settings ............................. 55
Viewing help information..................................... 56
WAP............................................................57
About the WAP browser....................................... 57
Get In WAP
(Menu 2-1) ........................................ 58
Prompt
(Menu 2-2) .............................................. 62
Push SL Option
(Menu 2-3) ................................... 62
Voice Mail ...................................................63
Voice Mail (Menu 3-1) .......................................... 63
Voice Mail#
(Menu 3-2) ........................................ 63
Voice Portal ................................................64
Voice Portal (Menu 4-1) ....................................... 64
Voice Portal#
(Menu 4-2) ..................................... 64
Messaging..................................................65
Messenger (Menu 5-1) ......................................... 65
Chat
(Menu 5-2) ................................................. 66
Torpedo SMS
(Menu 5-3) ..................................... 66
E-mail
(Menu 5-4) ............................................... 67
Torpedo SMS...............................................68
New Msg (Menu 6-1) ........................................... 68
Voice
(Menu 6-2) ................................................ 70
Inbox
(Menu 6-3) ................................................ 71
Sent
(Menu 6-4) ................................................. 72
Draft
(Menu 6-5) ................................................. 73
Saved
(Menu 6-6) ............................................... 73
Table of contents
5
Web Alert (Menu 6-7) .......................................... 73
Erase Msg
(Menu 6-8) .......................................... 74
Msg Setting
(Menu 6-9) ....................................... 74
Calls............................................................77
Outgoing (Menu 7-1) ........................................... 77
Incoming
(Menu 7-2) ........................................... 78
Missed
(Menu 7-3) ............................................... 79
Erase History
(Menu 7-4) ..................................... 79
Air Time
(Menu 7-5) ............................................ 80
Contacts......................................................81
Find (Menu 8-1) .................................................. 81
Add New Entry
(Menu 8-2) ................................... 84
Group Setting
(Menu 8-3) ..................................... 87
My Phone#
(Menu 8-4) ........................................ 88
Memory
(Menu 8-5) ............................................. 88
Other Functions ..........................................89
Planner (Menu 9-1) ............................................. 89
Display
(Menu 9-2) ............................................ 102
Sounds
(Menu 9-3) ............................................ 105
Voice Dial
(Menu 9-4) ........................................ 109
Setup
(Menu 9-5) .............................................. 110
Voice command.........................................119
Health and safety information...................120
Exposure to radio frequency (RF) signals ............. 120
Road safety ..................................................... 124
Operating environment ..................................... 125
Electronic devices............................................. 125
Potentially explosive environment....................... 127
Emergency calls ............................................... 128
Other important safety information..................... 129
Care and maintenance ...................................... 130
Acknowledging special precautions and the FCC and in-
dustry canada notice......................................... 131
Glossary....................................................150

6
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switching off in near all medical equipment
Switch off your phone near medical equipment.
Hospitals and health care facilities may be using
equipment that could be sensitive to external RF
energy. Follow any regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their performance.
Special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Water resistance
Your phone is not water-resistant. Keep it dry.
Important safety precautions
7
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Key in the emergency number for your present
location, then press . Give all necessary
information as accurately as possible. Do not end
the call until given permission to do so.
Keeping small children away from your
phone
Keep the phone and all its parts including
accessories out of reach of small children.
Accessories and batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and safety information” on page 120.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.

8
Unpacking
Your package contains the following items. The
illustrations below may look different from your
phone and accessories:
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
Handset Battery
Travel adapter Hand strap
• Headset • Travel adapter
• Standardbattery • Cigarette lighter
adapter
• Hands-free car kit • Data cable
Headset
User’s manual
9
Your phone
Phone layout
The following illustrations show the main elements
of your phone.
With the phone open
Earpiece
Display
Microphone
Soft key (left)
Send key
Soft key (right)
Power on/off/
Menu exit key
Alphanumeric
keys
Special
function keys
Cancel/clear
key
Navigation (Up/
Down/Left/
Right) keys
Volume/menu
browse keys
OK key
Headset jack

Your phone
10
Tecla
Key (s) Description
(soft keys)
Performs the functions indicated by
the text above them, on the bottom
line of the display.
(Navigation
keys)
In Menu mode, scrolls through menu
options.
In Standby mode, quickly enters
favorite menu options directly. For
further details about shortcuts, see
page 103.
In Menu mode, selects the current
menu or option or confirms your
input.
Makes or answers a call.
In Standby mode, retrieves the most
recent numbers dialed, received, or
missed. Redials the last number when
pressed and held.
Ends a call. Also switches the phone
on and off when pressed and held.
In Menu mode, cancels your input and
returns the display to Standby mode.
Deletes characters from the display.
In Menu mode, returns the display to
the previous menu level.
Enters numbers, letters, and some
special characters.
Your phone
11
In Standby mode, initiates the Voice
Command feature when pressed and
held.
In the text entry mode, changes case
of letters.
In Standby mode, quickly enters or
exits Silent mode when pressed and
held.
In the text entry mode, inserts a
space.
(on the left side of the phone)
Adjusts the ringer volume when the
phone is ringing and the earpiece
volume during a call.
In Standby mode, adjusts the key
tone volume.
Key (s) Description (continued)

Your phone
12
Display
Layout
The display has three areas; the top line of icons,
the text and graphic area, and the bottom line of
soft key indicators.
Icons
Icon Description
Signal strength : Shows the received
signal strength. The greater the number
of bars, the better the signal.
Service : Appears when a call is in
progress.
No service : Appears when you are
outside a service area. When it displays,
you cannot make or receive calls. Wait a
little while for a better signal or move
into an open area to regain service.
Icons
Text and
graphics area
Soft key function
indicators
Menu Contacts
Your phone
13
New text message : Appears when a
new text message received.
New voice mail : Appears when a new
voice mail is received.
New text message and voice mail :
Appears when there are new text
messages and voice mails received.
Alarm mode : Appears when you set an
alarm to ring at a specified time.
Roaming : Appears when you are out of
your home area and have logged onto a
different network; for example, when
traveling in other countries.
Ringer on : Appears when you set the
ringer volume for calls to one from
Level 1 to Level 8 or to 1-Beep .
Ringer off : Appears when you set the
ringer volume for calls to
Silent .
Vibration mode : Appears when the
ringer volume for calls is set to
Vibrate
or
High+Vib , or when your phone is in
Silent mode.
Digital mode : Indicates when the
phone is logged onto a digital network.
Analog mode : Indicates when the
phone is logged onto an analog network.
1x mode : Indicates when the phone is
in 1x mode.
Icon Description (continued)

Your phone
14
Service light
The service light on the top right corner of the
phone, flashes to indicate an incoming call,
message, or alarm and flashes for a few seconds
when you turn on or off the phone.
It blinks while the battery is charging with the
travel adapter; it lights when the battery is fully
charged.
To make the service light turn on, set the
Service
LED
menu; see page 104 for further details.
Battery status : Shows the level of your
battery. The more bars you see, the
more power you have remaining.
Icon Description (continued)
15
Getting started
Using the battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and
chargers. Ask your local Samsung dealer for
further details.
Note : You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
180 minutes for a standard battery.
Installing the battery
1. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.

Getting started
16
2. Press the battery until it clicks into place. Make
sure that the battery is properly installed
before switching the phone on.
Removing the battery
1. If necessary, switch off the phone by pressing
and holding until the power-off image
displays.
2. Slide the battery lock toward the top of the
phone and lift away the battery, as shown.
Charging the battery
A travel adapter is provided for charging your
batteries. The travel adapter allows you to use the
phone while the battery is charging, but this will
cause the battery to charge more slowly.
➀➁
Getting started
17
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
jack at the bottom of the phone.
Make sure that the arrow on the connector is
facing up, as is the phone.
2. Plug the adapter into a standard AC wall outlet.
The battery strength icon on the display shows
that the battery is charging.
3. When charging is finished, unplug the adapter
from both the power outlet and the phone by
pressing the buttons on both sides of the
connector and pulling the connector out.
Note : You must unplug the charger before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low battery indicator
➀
➀
➁

Getting started
18
When the battery is weak and only a few minutes
of talk time remain, a warning tone sounds and a
“Low Battery! Recharge Soon” message repeats at
regular intervals on the display. In this case, the
phone turns off the backlight of the display to
conserve battery power.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Getting started
19
Switching on or off the phone
1. Open the phone.
2. Press and hold until the power-on image
displays to switch on the phone.
The service light on the phone flashes and an
alert sounds. When the system locates
services, the greeting message displays along
with the time and date. You can now place and
receive calls.
If the phone is out of service, the No Service
icon ( ) appears on the display. In this case,
you cannot place and receive calls. You can try
again later when service is available.
Note : You can change the display language in
the
Language menu ( Menu 9-5-5 ). For
further details, see page 112.
3. When you wish to switch off the phone, press
and hold for more than two seconds until
the power-off image displays.
WARNING!
Do not switch on the phone when mobile phone
use is prohibited or when it may cause
interference or danger.
Note : As with any other radio-transmitting device,
do not touch the antenna unnecessarily when
the phone is switched on. Contact with the
antenna affects the call quality and may cause
the phone to operate at a higher power level
than otherwise needed.

Getting started
20
Using the soft keys
Your phone offers a set of functions that allows
you to customize it. These functions are arranged
in menus and submenus, accessed using the two
soft keys, and . Each menu and submenu
allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary depending on the
current function you are using; the labels on the
bottom line of the display just above each key
indicate their current role.
Example:
Menu Contacts
VIVO ao VIVO
9:43ATue May 04
Press the left soft
key to access Menu
mode.
Press the right soft
key to access the
Contacts menu.
Getting started
21
Your phone’s modes
Standby mode
Standby is the most basic state of your phone.
The phone goes into Standby mode after you turn
it on or whenever you briefly press . When your
phone is in Standby mode, you will typically see
the greeting message and the current time and
date. If you enter a phone number, you can press
to dial it or press the
Save soft key to save it
in Contacts.
Press at any time to return to Standby mode.
Be careful; if you are on a call when you press ,
the call disconnects and the phone returns to
Standby mode.
Talk mode
You can place and answer calls only when your
phone is turned on. During a call, the phone is in
Talk mode. While you are in Talk mode, pressing
the
Menu soft key gives you a list of options. See
page 36 for details.
Power Save mode
Your phone comes with a Power Save feature that
is automatically activated if your phone is unable
to find a signal after 15 minutes of searching.
While this feature is active, the phone’s battery
charge is conserved. The phone automatically
rechecks for a signal periodically. To manually
force the phone to recheck for a signal, press any
key.
9:43A Tue May 04

Getting started
22
Lock mode
When you lock your phone using the Lock Phone
menu (
Menu 9-5-0-1 ) in the Security menu,
you cannot use the phone. In Lock mode, you can
receive messages and calls, but you cannot place
an outgoing call until you unlock the phone.
To unlock the phone, you need to enter the lock
code.
For details about locking and unlocking your
phone, see page 115.
Silent mode
Silent mode disables all sounds on the phone. This
feature is best used in situations where the phone
might disturb others, such as in a meeting, in a
library, or in a theater. Your phone can be set to
Silent mode with a press of a key in Standby
mode.
In Standby mode, press and hold until “Enter!
Silent mode” and the Vibration icon ( ) display.
To exit and reactivate the previous sound settings,
press and hold until “Exit! Silent mode”
appears. The Vibration icon no longer displays.
Call functions
23
Call functions
Making a call
In Standby mode, enter the area code and phone
number and press .
Note : When you have activated the Auto Retry
menu (
Menu 9-5-4 ), the phone will
automatically retry to make the call if no one
answers or the line is busy. See page 112 for
further details.
While entering a number, press the Save soft key
or to save the number in Contacts. Press the
Menu soft key to access the following options:
4-digit Dial : allows you to use the 4-digit Dialing
feature. This option is only available when you
enter 4 digits. For details, see page 28.
Speed Dial : allows you to use the Speed Dialing
feature. This option is only available when you
enter a number corresponding to a location in
contacts. For details, see page 26.
Talk : places a call to the number.
Save : saves the number to Contacts.
Find : finds a number from Contacts.
Hard Pause : enters a hard pause.
2sec Pause : enters a 2-second pause.

24
Correcting the number
Ending a call
When you want to end your call, press .
The length of the call displays along with the
phone number of the called person. If the number
is stored in your Contacts, the name displays. If
there is no match, you can press and store the
number in Contacts. For further details about
storing the number in Contacts, see page 84.
Alternatively, simply close the phone to end a call.
Emergency dialing
You can place calls to standard emergency
numbers, such as 190, 192, 193, and three
specified numbers on the Emergency # list, even
if your phone is locked or all of the outgoing calls
are restricted.
For further details about emergency numbers, see
page 117.
To clear the Press
last digit displayed .
whole display and hold it for more
than one second.
Call functions
25
Using the recent call logs
The phone stores up to 30 of the calls you have
dialed, received, or missed chronologically. The
last call is saved in the first position.
To recall any of these numbers:
1. If there are any characters on the display,
return to Standby mode by pressing .
2. Press . The list of recent calls displays.
The following icons indicate the types of calls:
• : Outgoing calls
• : Incoming calls
• : Missed calls
3. Press the Navigation keys or the Volume keys
on the left side of the phone until you find the
number you want.
4. Press to dial the highlighted number.
Making a call from Contacts
You can store the phone numbers you called
regularly in the phone’s memory, which is called
“Contacts”. You then simply recall the number to
dial.
For further details about the Contacts feature, see
page 81.

Call functions
26
Prepend dialing
The Prepend option lets you add digits, such as
area codes and network feature activation codes,
to a phone number that is in your call logs or
Contacts.
To prepend a phone number stored in your phone:
1. Access a call log in the Call logs list by pressing
. Or access Contacts by pressing the
Contacts soft key.
2. Select the item you want using the Navigation
keys and press .
The display shows the details of the number.
3. Press the Menu soft key to access the menu
pop-up list.
4. Press to select the
Prepend option.
5. Enter the area code or network feature code.
6. Press to dial the number.
Speed dialing
Once you have stored phone numbers in Contacts,
you can dial them easily with a few presses of the
keys.
Note : When several numbers are saved in one name
entry, the first number you entered is
automatically specified as a speed dial
number. To change the speed dial number,
use
Speed dial of the Contacts options; see
page 85.
One-touch dial
Call functions
27
Memory locations 001 through 009 are special
one-touch locations. You can dial the phone
numbers stored in Contacts from 001 through 009
simply by pressing one key.
Press and hold the third digit of the memory
location.
For example: Location no. 009
Press and hold .
The number (and name) stored displays, and then
dials.
Two-touch dial
Memory locations 010 through 099 are special
one-touch locations.
Press the second digit(s) briefly, then hold down
the last digit of the memory location.
For example: Location no. 023
Press briefly and hold down
.
The number (and name) stored displays, and then
dials.
Three-touch dial
Memory locations 100 through 500 are special
three-touch locations.
Press the first two digit(s) briefly, then hold down
the third digit of the memory location.
For example: Location no. 123
Press and briefly, then
hold down .
The number (and name) stored displays, and then
dials.

Call functions
28
4-digit dialing
You can quickly dial a phone number in Contacts
by entering its last 4 consecutive digits. This
feature is convenient if you have the number
memorized, but you have forgotten where the
number is stored in your Contacts.
1. Enter the last 4 digits of the phone number you
want to dial.
2. Press the
Menu soft key and select the 4-digit
Dial
option. The phone displays the phone
number that matches the four digits.
If the phone found more than one number that
contains those four digits, it displays the first
number. Scroll through the numbers using
or to select a number.
3. Press to dial the number.
Pause dialing
When you call an automated system, like a
banking service, you are often required to enter a
password or account number. Instead of manually
entering the numbers each time, you can store
the numbers in your Contacts, separated by
pauses.
There are two kinds of pauses that can be entered
on your phone:
Call functions
29
• Hard pause : A hard pause stops the dialing
sequence until you press .
• 2-sec pause : A 2-second pause stops the
dialing sequence for 2 seconds and then
automatically sends the remaining digits.
Note : Multiple two second pauses can be entered to
extend the length of a pause. Keep in mind
that pauses count as digits towards the 32
digit dialing maximum.
Storing pauses in a Contacts entry
To store a number in your Contacts that contains
pauses:
1. Enter the phone number you want to store,
such as the bank’s teleservice phone number.
2. Press the Menu soft key to access the options.
3. Select the required pause type and press .
• Press for
Hard Pause . The letter “P”
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press for
2sec Pause . The letter “T”
displays, meaning that a 2-second pause will
occur at that point in the dialing sequence.

Call functions
30
4. Enter the digits that need to follow the pause,
such as your account number.
5. Repeat steps 2 through 4 to add more pauses
and numbers, if necessary.
6. Store the number in your Contacts as you
normally would by pressing or the
Save soft
key and following from step 2 on page 84.
Pause dialing from a stored Contacts
entry
1. Dial the number of the service from Contacts.
2. If you stored the number using a hard pause,
wait for the appropriate prompt from the
number you are calling. When prompted, press
to send the DTMF (Dual tone multi-
frequency) number that follows the pause.
If you stored the number using a 2-second
pause, your phone transmits the number that
follows the “T” pause two seconds after the
connection.
3. “Sending DTMF” flashes on the display and the
transmitted tone sounds.
4. Repeat from step 2, if necessary.
Manual pause dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you
want to call, such as a bank’s teleservice
number.
2. Press the
Menu soft key to access the options.
Call functions
31
3. Select the required pause type and press .
• Press for
Hard Pause . The letter “P”
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press for
2sec Pause . The letter “T”
displays, meaning that a 2-second pause will
occur at that point in the dialing sequence.
4. Enter the number to be sent after the pause
and then press to dial the first number.
5. For a hard pause, press again at the
prompt to send the additional number after
connecting.
If you enter the number using a 2-second
pause(s), the phone sends the number that
follows the pause two seconds after the
connection.
Voice dialing
Once you have stored a phone number in
Contacts, you can dial it simply by saying the
associated name or the number.
Before using the Voice Dial feature, you first need
to program your phone to recognize your voice

Call functions
32
and pronunciation in the Voice Dial menu ( Menu
9-4
). For details, see page 109.
To begin voice dialing:
1. In Standby mode, open the phone or press and
hold , depending on the setting in the
Set
Active
menu ( Menu 9-4-3 ).
For details about the menu, see page 109.
2. At a prompt, say
Name Dial or Digit Dial .
3. Say a name or a phone number to the
microphone.
4. When the phone confirms the name or number
you said, say “Yes” to place a call.
Alternatively, say “No” to cancel.
Call functions
33
Adjusting the volume during a call
During a call, if you want to adjust the voice
volume, use the Volume keys on the left side of
the phone.
Press to increase the volume level and to
decrease the level. The image on the display
shows all eight levels; the more bars you see, the
higher the level is.
In Standby mode, you can also adjust the keypad
tone volume using these keys.

Call functions
34
Answering a call
When somebody calls you, the phone alerts you
by ringing and blinking the service light.
If the caller can be identified, the caller’s phone
number, or name if stored in your Contacts,
displays.
There are three ways to answer a call depending
on your setting in the
Call Answer menu ( Menu
9-5-3
):
To end the call, close the phone or press .
Note : You can answer a call while using Contacts or
menu functions. The current operation stops.
If you select To answer the call,
Any Key open the phone or press any
key, except and the
Volume keys.
Send Key press .
Folder Open open the phone or press
.
Call functions
35
Silencing a call ringer
You can silence the ringer when a call comes in by
pressing one of the Volume keys on the left side of
the phone. If the phone is open, you can also
press .
The “Ringer Silenced” message appears and the
phone does not ring.
Viewing missed calls
If you fail to answer a call for any reason, the
phone indicates the missed call by displaying a
text notification on the screen. Additionally, if
caller information is available, a Missed entry is
created and the screen displays the phone number
of the last missed call.
When the display informs you of the missed call,
press to dial the number, or to clear the
message and return to Standby mode.
To view missed calls, access the
Missed menu
(
Menu 7-3 ). For details, see page 79.

Call functions
36
Options during a call
Your phone provides a number of functions that
you can use during a call. As many of these
options are network services, you may not be able
to use all of them at all times.
Press the
Menu soft key during a call to access
the following options:
Contacts : allows you to access the Contacts
menu. See page 81 for details.
Mute/Quit : allows you to switch your phone’s
microphone off, so that the other person on the
phone cannot hear you.
Example: You wish to say something to a person
in the room, but do not want the other person on
the phone to hear you.
Silent/Quit : does not sound the key tones. It
allows you to press keys without hearing annoying
key tones during a call.
Send Tel# : sends your telephone number to the
other person’s phone.
Calls : allows you to access the Calls menu. For
details, see page 77.
Messages : allows you to use the Torpedo SMS
menu. For details, see page 68.
Planner : allows you to access the Planner menu.
For details, see page 89.
Voice Privacy : allows you to access the Voice
Privacy
menu. For details, see page 118.
Call functions
37
Using caller ID
This feature tells you who is calling you by
displaying the caller’s number when the phone
rings. If the number is stored in your Contacts,
the corresponding name is also displayed. If you
call someone who has this feature, your phone
number displays on her/his phone.
Note : Contact your service provider to set up the
Caller Line Identification service.
Call forwarding
This network feature allows you to forward
incoming calls to another phone number, even
while your phone is turned off. Activating Call
forwarding does not affect outgoing calls made
from your phone.
Note : Contact your service provider to activate Call
forwarding.