Samsung SGH-F490 User manual

GSM TELEPHONE
SGH-F490
GSM TELEPHONE CONTENTS
1. Safety Precautions
2. Specification
3. Product Function
4. Array course control
5. Exploded View and Parts List
6. Main Electrical Parts List
7. Block Diagrams
8. PCB Diagrams
9. Flow Chart of Troubleshooting
10. Reference data
11. Disassembly and Assembly
Instructions

Samsung Electronics Co.,Ltd.
2008. 01 Rev.1.0
ⓒ
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
Country Web Site
North America service.samsungportal.com
Latin America latin.samsungportal.com
CIS cis.samsungportal.com
Europe europe.samsungportal.com
China china.samsungportal.com
Asia asia.samsungportal.com
Mideast & Africa mea.samsungportal.com
GSPN (Global Service Partner Network)

2. Specification
2-1
2-1. GSM General Specification
EGSM 900 DCS 1800 PCS 1900 WCDMA2100
Freq.
Band[MHz]
Uplink/Downlink
880~915
925~960
1710~1785
1805~1880
1850~1910
1930~1990
1920~1980
2110~2170
ARFCN range 0~124 &
975~1023 512~885 512~810 UL:9612~9888 DL:10562~10838
Tx/Rx spacing 45MHz 95MHz 80MHz 190MHz
Mod. Bit rate/
Bit Period
270.833kbps
3.692us
270.833kbps
3.692us
270.833kbps
3.692us 3.84Mcps
Time Slot
Period/Frame
Period
576.9us
4.615ms
576.9us
4.615ms
576.9us
4.615ms
Frame length : 10ms
Slot length: 0.667ms
Modulation 0.3GMSK 0.3GMSK 0.3GMSK QPSK
HQPSK
MS Power 33dBm~5dBm 30dBm~0dBm 30dBm~0dBm 24dBm~ -50dBm
Power Class 4
(max +33dBm)
1
(max +30dBm)
1
(max +30dBm)
3
(max +24dBm)
Sensitivity -102dBm -100dBm -100dBm -106.7dBm
TDMA Mux 8 8 8 NA
Cell Radius 35Km 2Km 2Km 2Km

Speclflcation
2-2
TX Power
control level GSM900
533±2dBm
631±2dBm
729±2dBm
827±2dBm
925±2dBm
10 23±2 dBm
11 21±2 dBm
12 19±2 dBm
13 17±2 dBm
14 15±2 dBm
15 13±2 dBm
16 11±3 dBm
17 9±3dBm
18 7±3 dBm
19 5±3 dBm
TX Power
control level DCS1800
030±3dBm
128±3dBm
226±3dBm
324±3dBm
422±3dBm
520±3dBm
618±3dBm
716±3dBm
814±3dBm
912±4dBm
10 10±4 dBm
11 8±4dBm
12 6±4 dBm
13 4±4 dBm
14 2±5 dBm
15 0±5 dBm
TX Power
control level PCS1800
030±3dBm
128±3dBm
226±3dBm
324±3dBm
422±3dBm
520±3dBm
618±3dBm
716±3dBm
814±3dBm
912±4dBm
10 10±4 dBm
11 8±4dBm
12 6±4 dBm
13 4±4 dBm
14 2±5 dBm
15 0±5 dBm
2-2. GSM Tx Power Class

SAMSUNG Proprietary-Contents may change without notice
5. Exploded View and Parts List
5-2
This Document can not be used without Samsung's authorization
5-1. Cellular phone Exploded View
QME03
QPC01
QFR01
QLC01
QLB01
QCA01
QMO01
QSP01
QVK02
QVK01
QME32
QSH01
QVO01
QCR04
QCR03
QRF01
QCB01
QMP01
QCA02
QAN02
QCR04
QRE01
QCK01
QCK02
QCR04
QBA01
QBA00
QBA02
QMI01
QRF03
QDC01
QIF01
QST08

SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
5-2
This Document can not be used without Samsung's authorization
Design LOC Description SEC CODE
QAN02 INTENNA-SGH F490 GH42-01406A
QBA00 PMO CASE-BATT GH72-44834A
QBA01 INNER BATTERY PACK-1000MAH,BLK GH43-02974A
QBA02 PMO CASE-BATT V2 GH98-08022A
QCA01 CAMERA MODULE-SGH F490 GH59-05166A
QCA02 KEY FPCB-CAM KEY FPCB ASS'Y GH59-05137A
QCB01 COAXIAL CABLE-SGHE490 ANT CABL GH39-00674A
QCK01 PMO KEY-CAMERA GH72-46638A
QCK02 PMO KEY-HOLD GH72-46639A
QCR03 SCREW-MACHINE 6001-001811
QCR04 SCREW-MACHINE 6001-001479
QCR04 SCREW-MACHINE 6001-001479
QCR04 SCREW-MACHINE 6001-001479
QFR01 ASSY CASE-FRONT GH98-06647A
QLB01 ASSY BRACKET-LCD GH98-06649A
QLC01 LCD-SGH F490MODULE GH07-01250A
QME03 UNIT-TOUCH PANEL GH59-05361A
QME32 UNIT-FLASH FPCB GH59-05136A
QMI01 MICROPHONE-ASSY-SGH F490 GH30-00449A
QMO01 MOTOR LINEAR VIBRATION-SCH F49 GH31-00401A
QMP01 PBA MAIN-SGH F490 GH92-04207A
QPC01 FPC-SLIDE FPCB GH41-01945A
QRF01 TAPE-SHEET RF GH74-36524A
QSH01 ICT SHIELD-COVER GH70-03077A
QSP01 SPEAKER 3001-002281
QST08 ASSY ACCE-STYLUS PEN GH98-02835H
QVK01 KEY FPCB-VOLUME KEY GH59-05121A
QVK02 ASSY ETC-SGH-F490 EARJACK FPCB GH59-05163A
QVO01 PMO KEY-VOLUME GH72-46637A
QRE01 ASSY CASE-REAR GH98-06648A
QDC01 ASSY DECO-CAMERA GH98-06650A
QIF01 PMO COVER-IF GH72-46635A
QRF03 PMO COVER-EAR GH72-46636A
5-2. Cellular phone Parts List

SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
5-3
This Document can not be used without Samsung's authorization
Description SEC CODE
IC-MEMORY CARD 1109-001363
CBF INTERFACE-DLC APCBS10BBE(S GH39-00922A
CBF INTERFACE-MIC CABLE(S20P,T GH39-00948F
ADAPTOR-ATADS10EBE,BLK,EU GH44-01702A
S/W CD-SGHF490PC STUDIO CD GH46-00598A
UNIT-EARPHONE(BLK) GH59-02261A
LABEL(P)-UNIT SEAL GH68-00518B
LABEL(R)-WATER SOAK GH68-09361A
LABEL(P)-OPEN MP3 GH68-11246A
MANUAL USERS-EU FRENCH GH68-17275A
LABEL(R)-MAIN(FRAN) GH68-17280B
BOX-UNIT(EU) GH69-06359A
BOX-SLIP CASE(EU_NEW) GH69-06454A
RMO RUBBER-LED BLOCK GH73-11374A
VINYL-BOHO TSP GH74-36523A
TAPE INSU-IF CONN GH74-37028A
VINYL-BOHO MAIN GH74-37232A
SPONGE-MEGA CAM GH74-37442A
ASSY PACKING-HAAXEF(BEA/FRAN) GH95-01298A
ASSY ACCE-PHONE POUCH GH98-07723A
CBF SIGNAL-SPHA560 RF CABLE GH39-00397A
CBF INTERFACE-SGH-L760 TEST CA GH39-00886A
CBF INTERFACE-SGH-L760 TEST CA GH39-00889A
INSTALL-TEST JIG BOX GH80-03308A

SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
5-4
This Document can not be used without Samsung's authorization

SAMSUNG Proprietary-Contents may change without notice
11. Disassembly and Assembly Instructions
11-1
This Document can not be used without Samsung's authorization
1) Notice the rear case should not be damaged or
scratched.
1) Notice the rear case should not be damaged or
scratched.
1) Notice the rear case should not be damaged or
scratched.
11-1. Disassembly Instructions
3Separate REAR after separate left/right each
2 POINTs' LOCKER.
4Separate volume key, camera key,power on key.
1) Unscrew 6 points in the rear case.
11)After EAR COVER with picture does OPEN
Separate upper/lower column each 2POINTs'
LOCKER.
2

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-2
This Document can not be used without Samsung's authorization
1)Observe to FPCB's that get taken, that tear. 1)Observe to FPCB's that get taken, that tear.
1)Take care so that parts breakdown may not occur.
2)Observe to FPCB's that get taken, that tear.
1)Take care so that motor wire may not damage.
1)Notice the body should not be damaged or
scratched.
7After ACTUATOR of TSP FPCB connector does
OPEN, TSP FPCB does take off.
81) Use decomposition groove take off the
motor.
2) Do motor take off in motor connector.
1)Volume KEY,camera KEY FPCB does take off.
51)Separate camera connector.
2)Separate camera module in Bracket.
6