Samsung SPC-6000 User manual

Technical Information
WriterWriter Technical Support in HQ ImportanceImportance Low
Issue No.Issue No. CS-110309 Date of IssueDate of Issue 9th Mar. 2011
Related ModelsRelated Models SPC-6000, SRD Series TypeType Information
SubjectSubject SPC-6000 Quick Setup Guide
CC
C
ontents
C
ontents
SPC
-
6000
SPC
6000
Quick Set-up Guide
■Summary
The SPC-6000 Quick set-up guide describes how to connect to both
an SPD speed dome and Samsung Digital Video Recorder for both
basic and multiple operations.
The equipment used in this example includes:
• SPC-6000(FW v1.00_100913)
• SRD-1670DC(FW v1.02_110118164134)
Website : www.samsungcctv.com SCSS : www.scss.net e-mail : help.cct[email protected] Tel : [phone]
• SPD-3750T(Dome v1.28)

ContentsContents
■Basic Operation
di
(1) Har
d
ware Connect
i
ons
Website : www.samsungcctv.com SCSS : www.scss.net e-mail : help.cct[email protected] Tel : [phone]

ContentsContents
b. Menu Set
Caution : Both of SPC-6000 and SCC-3100A cannot be used as Master, Slave in one system. 2
keyboards are not compatible, if SVR and SRD series are used in one system, the system
keyboard should be separately used as recommended below
keyboard
should
be
separately
used
as
recommended
below
.
- SVR Series : SCC-3100A
- SRD Series : SPC-6000
Website : www.samsungcctv.com SCSS : www.scss.net e-mail : help.cct[email protected] Tel : [phone]

ContentsContents
<Multi
p
le O
p
eration>
pp
a. hardware connection
First, let’s take a look at the system with coax camera installed. In order to control the
ifi f h ifi S d h l d d i S
spec
ifi
c camera o
f
t
h
e spec
ifi
c
S
RD connecte
d
, w
h
at you on
l
y nee
d
to
d
o
i
s to connect
S
RD.
If succeed, keyboard will send packets to control SRD and SRD will control PTZ cameras. For
example, if you would like to control Camera which is connected to channel 1 of SRD,
Connect SRD first by pushing [DVR] + [1] + [Enter] and choose channel 1. Also, if you would
like to control Camera connected to channel 2 of SRD 2, Connect SRD by pushing [DVR] + [2]
+ [Enter] + [2] + [CAM] in sequence.
Website : www.samsungcctv.com SCSS : www.scss.net e-mail : help.cct[email protected] Tel : [phone]

ContentsContents
In case of system using RS-485 data cable, TX port on rear side of SRD will connect both of
keyboard data +/- and camera data +/-. It looks like the SRD uses ‘Serial control’ (Keyboard
controls SRD, and SRD controls Camera that I call it ‘Serial control’) but SRD will just bypass
the data from the keyboard and pass it to the camera directly.(I call it ‘Parallel control’) In
short,
SRD ith PTZ S i l t l f th k b d
-
SRD
w
ith
coax
PTZ
:
S
er
i
a
l
con
t
ro
l
f
rom
th
e
k
ey
b
oar
d
- SRD with RS-485 PTZ : Parallel control from the keyboard (SRD bypass data & Keyboard
controls PTZ directly)
Therefore, Please assign ID of PTZs & SRDs with all different numbers to prevent
communication error of the data between the keyboard and devices. Also please don’t forget
to set termination as ‘ON’ for far position of camera from the DVR.
b. menu set
Website : www.samsungcctv.com SCSS : www.scss.net e-mail : help.cct[email protected] Tel : [phone]

ContentsContents
c. Controller Operation
- End -
Website : www.samsungcctv.com SCSS : www.scss.net e-mail : help.cct[email protected] Tel : [phone]