Samsung XA067T User manual

1
Outdoor Product User Manual
Model Name: XA067T/XA100T/XA160T
Model Code:LH067XATSAC/**
LH100XATSAC/** LH160XATSAC/**
Version Number: A03
Data: 03-Jun-2020

2
Table of contents
1. Safety ................................................................................................................................ 4
1.1 Warning& Symbols.................................................................................................... 4
1.2 Safety Guidelines ...................................................................................................... 5
1.3 Installation instructions............................................................................................. 6
2. Open Package .................................................................................................................... 7
2.1 Front view ................................................................................................................ 7
2.2 Side view.................................................................................................................. 8
2.3 Placing cabinet.......................................................................................................... 9
3. Outdoor Product introduction........................................................................................... 10
3.1 Product Specification .............................................................................................. 10
3.2 Product Appearance................................................................................................ 16
3.3 Product design........................................................................................................ 18
3.4 Product main components....................................................................................... 20
4. LED display screen components ........................................................................................ 21
5. Parts List And Parts BOM List ............................................................................................ 23
5.1 Accessories list........................................................................................................ 23
5.2 Spares list............................................................................................................... 24
5.3 Parts BOM List ........................................................................................................ 25
5.4 Service BOM List..................................................................................................... 26
6. Trouble shooting list......................................................................................................... 35
6.1 Display screen problem ........................................................................................... 35
6.2 Cabinet problem ..................................................................................................... 38
6.3 Module problem..................................................................................................... 40
7. Installation Guides ........................................................................................................... 44
7.1 Mechanical requirements and installation................................................................ 44
7.2 Electrical requirements............................................................................................ 48
8. Connection of the LED screen ........................................................................................... 51
8.1 Connection for equipments ..................................................................................... 51
8.2 Port of Cabinet........................................................................................................ 51
8.3 Connection for power cables ................................................................................... 52
8.4 Connection for data cables ...................................................................................... 53
8.5 Cabinet arrangement drawings sample .................................................................... 54
9. Control system setting...................................................................................................... 55
9.1 Software setup........................................................................................................ 55
9.2 NovaLCT Main interface .......................................................................................... 56
9.3 Main Menu............................................................................................................. 57
9.4 Screen Config.......................................................................................................... 60
9.5 Advanced color configuration .................................................................................. 66
9.6 Adjust the brightness and Gamma........................................................................... 69
9.7 Screen Control ........................................................................................................ 74
9.8 Check Hardware Information................................................................................... 75
9.9 Brightness/Color Calibration.................................................................................... 76

3
9.10 Hardware Monitoring............................................................................................ 95
10. Servicing ...................................................................................................................... 102
10.1 Cleaning.............................................................................................................. 102
10.2 Calibration .......................................................................................................... 103
10.3 Replacement steps .............................................................................................. 104
11. Appendix ..................................................................................................................... 117
11.1 Responsibility for the Pay Service(Cost to Customers)........................................... 117
11.2 Recycle Mark ...................................................................................................... 118

4
1. Safety
1.1 Warning& Symbols
Grounding
The combination of multiple cabinets in an installation results in increased levels of
leakage current. In order to avoid risk of electric shock due to high leakage current, proper
grounding of the installation is required.
Defeating the purpose of the grounding type plug will expose you to the risk of electric
shock.
Grounding symbols
Electric safety
Do not open equipments with below symbols. To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts inside. Qualified service personnel is
required for serving.
High voltage symbols
High voltage symbols
The lighting flash with an arrowhead within a triangle is intended to tell the user that parts
inside this product may cause a risk of electrical shock to persons.

5
1.2 Safety Guidelines
Personal protection
Ensure you understand and follow all the safety guidelines, installation instruction,
warnings and symbols.
Mind yourself while working with heavy loads and high voltage.
Contact with high voltage may cause death or serious injury. Always disconnect power to
the display cabinet or cabinets prior to servicing.
All personnel at the LED Video Board installation site are required to have personal
protection equipment (PPE) such as hard hats, safety glasses, gloves, harnesses, and
other appropriate safety equipment.
Equipment protection
This installation must be performed by authorized and qualified technical personnel only.
Accredited safety officers must ensure the safety of the site, construction, assembly,
connection, use, dismantling, transport etc.
Assembly parts are designed for use only with Samsung displays.
LEDs use specific materials and manufacturing processing in order to achieve unique
advantages.Do not modify and/or replicate any components.
Ground the LED display screen before connecting the power source.Contacting displays
that are not earth-grounded may cause death or serious injury.
Do not use the LED display screen ground lugs for installation equipment such as welding
equipment.
Structural & mounting components should be kept dry, clean, lubricated (only if
recommended), coated properly, and maintained in a manner consistent with part design.
LED products must be installed and operated in a manner to reply on its design and
inspection a routine basis for security, wear, deformation, corrosion and any other
circumstances that may affect the load handling capability of the part.
We recommend inspections at regular intervals for all installations and increasing in
frequency for more critical installations. A part is damaged which may cause a decrease
in load capability. The part must be removed for service or replaced immediately.
Always follow LED display screen installation instruction.
Contact the support technical person if user has any question regarding the safety of an
application. The manufacturer assumes no liability for incorrect, inadequate, irresponsible
or unsafe assembly of systems.

6
1.3 Installation instructions
Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not block ventilation openings. Please install in accordance with the manufactures
instructions.
Avoid installation near heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. We suggest the user install some
equipment to reduce the heat if any.
Do not break the safety purpose of polarized or grounding type plugs/sockets. If the
provided sockets/plugs are damaged then replacement of the detective parts must be
undertaken immediately.
Protect the power/data cords from being taken off or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus. Replace
damaged power/data cords immediately.
Only use attachments/accessories specified or provided by the manufacturer.
Use with caution during lifting/moving or transporting to avoid damage by possible crash.
After receiving the LED display screen, please uncover all the boxes and cases, count
and check all things compare with the packing list. If there is any problem such as missing
or damaged part, contact the manufacture immediately.
Installation guide details are shown in charter 7&8.

7
2. Open Package
2.1 Front view
Step 1: Open the top wooden cover
Step 2: Open the side wooden cover
Step 3: Take the cabinet out from the wooden box.

8
2.2 Side view
Step 1: Open the top wooden cover
Step 2: Open the side wooden cover
Step 3: Take the cabinet out from the wooden box.

9
2.3 Placing cabinet
After taking the cabinets out from the wooden box, when you place the cabinet on the
ground, please put the back side on the ground first, then carefully put it standing on
the ground as shown above to make sure the modules will not be damaged.

10
3. Outdoor Product introduction
3.1 Product Specification
XAT6.7
No.
Parameter
Specification
1
Attribute
Outdoor P6.7
2
Model Name (VD Common)
XA067T
3
Basic Model Name)
LH067XATSAC
4
Pixel Pitch (mm)
6.7
5
LED vendor
Nationstar
6
LED package type
SMD2727
7
LED package part name
FM-Z2727RGBA-SH
8
LED Lifetime Hr
( 24Hr, Luminance 50% down)
100,000
9
Size of LED color bin combination
R: 5nm, G:4nm, B:4nm
10
Number of LED color bin combination
1ea, upto 2ea
11
Driver IC vendor
MBI
12
Driver IC part name
MBI5051B
13
T-CON vendor
Novastar
14
T-CON part name
MCTRL600/A4S
15
SMPS vendor
Great Wall
16
SMPS part name
GW-XSP300WV4.5 4.5V/60A
17
Module Dimentions, LxH (mm)
320x320
18
Cabinet Dimensions, LxH (mm)
960x960X125
19
Cabinet Dimensions
With Waterproof cover ,LxH (mm)
960x960x149.5
20
Cabinet Weight (kg/cabinet)
32±5%
21
Cabinet Construction
Aluminum
22
Box Dimension ,LxHxD(mm)
1032x1155x390(2pcs in 1 box)
23
Box Volume (m³)
0.465
24
Package Weight(kg)
93kg (1 box w/ 2 cabinets)
25
Brightness (cd/m²) Before Calibration
>6700
26
Brightness (cd/m²) After Calibration
>6000
27
Contrast Ratio(C/R)
3000：1
28
Front Mask for C/R
Louver/Mask
29
Viewing angle - Horizontal (o)
140
30
Viewing angle - Vertical (o)
100
31
Bit-depth(bit)
14

11
32
Refresh rate(hz) (typical)
≧4000
33
Scan rate (lines)
4
34
Power consumption - Max
<780(W/㎡) /72.5 (W/ft2)
35
Power consumption - Typical
<280(W/㎡) /26.0 (W/ft2)
36
Power
AC100-120V/220-240, 47-63Hz
37
Monitoring Function
Temperature and Receiving
card
38
Working Temperature (℃)
-30°C to 50°C
39
Operation Humidity
10% to 90%
40
Storage Temperature
-30°C to 60°C
41
Storage Humidity
10% to 90%
42
Color Temperature
43
- Default
6500K±500K
44
-Adjustable range
2800~16000K
45
Cooling
Self
46
Radian Support
-10°to +90°
47
IP Rating
IP65
48
Accessory in Box
Module, Sending box,Receiving
card, Hub boards,SMPS,
screws, cables, and so on.
49
EMC Class
Class A
50
Certification
51
Service
Front and Back service
52
Heat Power Consumption per Cabinets (W)
1564
53
Required Air Flow (CFM)
76
54
Power chain for per input(Pcs)
2 (110V) / 5(220V)
55
Singal chain for per port(Pcs)
30
56
Space for Back service (Behind cabinet)
≧600mm
57
Space for Front service (Behind cabinet)
≧250mm

12
XAT10
No.
Parameter
Specification
1
Attribute
Outdoor P10
2
Model Name (VD Common)
XA100T
3
Basic Model Name)
LH100XATSAC
4
Pixel Pitch (mm)
10
5
LED vendor
Nationstar
6
LED package type
SMD2727
7
LED package part name
FM-Z2727RGBA-SH
8
LED Lifetime Hr
( 24Hr, Luminance 50% down)
100,000
9
Size of LED color bin combination
R: 5nm, G:4nm, B:4nm
10
Number of LED color bin combination
1ea, upto 2ea
11
Driver IC vendor
MBI
12
Driver IC part name
MBI5051B
13
T-CON vendor
Novastar
14
T-CON part name
MCTRL600/A4S
15
SMPS vendor
Great Wall
16
SMPS part name
GW-XSP300WV4.5 4.5V/60A
17
Module Dimentions, LxH (mm)
320x320
18
Cabinet Dimensions, LxH (mm)
960x960X125
19
Cabinet Dimensions
With Waterproof cover ,LxH (mm)
960x960x149.5
20
Cabinet Weight (kg/cabinet)
32±5%
21
Cabinet Construction
Aluminum
22
Box Dimension ,LxHxD(mm)
1032x1155x390(2pcs in 1 box)
23
Box Volume (m³)
0.465
24
Package Weight(kg)
93kg(1 box w/ 2 cabinets)
25
Brightness (cd/m²) Before Calibration
>6700
26
Brightness (cd/m²) After Calibration
>6000
27
Contrast Ratio(C/R)
3000：1
28
Front Mask for C/R
Louver/Mask
29
Viewing angle - Horizontal (o)
140
30
Viewing angle - Vertical (o)
100
31
Bit-depth(bit)
14
32
Refresh rate(hz) (typical)
≧4000
33
Scan rate (lines)
2
34
Power consumption - Max
<780(W/㎡) /72.5 (W/ft2)
35
Power consumption - Typical
<280(W/㎡) /26.0 (W/ft2)

13
36
Power
AC100-120V/220-240, 47-63Hz
37
Monitoring Function
Temperature and Receiving card
38
Working Temperature (℃)
-30°C to 50°C
39
Operation Humidity
10% to 90%
40
Storage Temperature
-30°C to 60°C
41
Storage Humidity
10% to 90%
42
Color Temperature
43
- Default
6500K±500K
44
-Adjustable range
2800~16000K
45
Cooling
Self
46
Radian Support
-10°to +90°
47
IP Rating
IP65
48
Accessory in Box
Module, Sending box,Receiving
card, Hub boards,SMPS, screws,
cables, and so on.
49
EMC Class
Class A
50
Certification
51
Service
Front and Back service
52
Heat Power Consumption per Cabinets (W)
1535
53
Required Air Flow (CFM)
74.7
54
Power chain for per input(Pcs)
2 (110V) / 5(220V)
55
Singal chain for per port(Pcs)
60
56
Space for Back service (Behind cabinet)
≧600mm
57
Space for Front service (Behind cabinet)
≧250mm

14
XAT16
No.
Parameter
Specification
1
Attribute
Outdoor P16
2
Model Name (VD Common)
XA160T
3
Basic Model Name)
LH160XATSAC
4
Pixel Pitch (mm)
16
5
LED vendor
Retop
6
LED package type
DIP346
7
LED package part name
Retop346
8
LED Lifetime Hr
( 24Hr, Luminance 50% down)
100,000
9
Size of LED color bin combination
R: 2nm, G:2nm, B:2nm
10
Number of LED color bin combination
1ea, upto 2ea
11
Driver IC vendor
MBI
12
Driver IC part name
MBI5124
13
T-CON vendor
Novastar
14
T-CON part name
MCTRL600/A4S
15
SMPS vendor
Great Wall
16
SMPS part name
GW-XSP300WV4.5 4.5V/60A
17
Module Dimentions, LxH (mm)
320x320
18
Cabinet Dimensions, LxH (mm)
960x960X135
19
Cabinet Dimensions
With Waterproof cover ,LxH (mm)
960x960x159.5
20
Cabinet Weight (kg/cabinet)
37±5%
21
Cabinet Construction
Aluminum
22
Box Dimension ,LxHxD(mm)
1032x1155x390(2pcs in 1 box)
23
Box Volume (m³)
0.465
24
Package Weight(kg)
103kg(1 box w/ 2 cabinets)
25
Brightness (cd/m²) Before Calibration
>8100
26
Brightness (cd/m²) After Calibration
>7300
27
Contrast Ratio(C/R)
3000：1
28
Front Mask for C/R
Louver/Mask
29
Viewing angle - Horizontal (o)
120
30
Viewing angle - Vertical (o)
60
31
Bit-depth(bit)
14
32
Refresh rate(hz) (typical)
≧1920
33
Scan rate (lines)
1
34
Power consumption - Max
<600(W/㎡) /55.8 (W/ft2)
35
Power consumption - Typical
<210(W/㎡) /19.5 (W/ft2)
36
Power
AC100-120V/220-240, 47-63Hz

15
37
Monitoring Function
Temperature and Receiving
card
38
Working Temperature (℃)
-30°C to 50°C
39
Operation Humidity
10% to 90%
40
Storage Temperature
-30°C to 60°C
41
Storage Humidity
10% to 90%
42
Color Temperature
43
- Default
6500K±500K
44
-Adjustable range
2800~16000K
45
Cooling
Self
46
Radian Support
-10°to +90°
47
IP Rating
IP65
48
Accessory in Box
Module, Sending box,Receiving
card, Hub boards,SMPS,
screws, cables, and so on.
49
EMC Class
Class A
50
Certification
51
Service
Front and Back service
52
Heat Power Consumption per Cabinets (W)
518
53
Required Air Flow (CFM)
25.1
54
Power chain for per input(Pcs)
3 (110V) / 6(220V)
55
Singal chain for per port(Pcs)
160
56
Space for Back service (Behind cabinet)
≧600mm
57
Space for Front service (Behind cabinet)
≧250mm

16
3.2 Product Appearance

17
XAT6.7&XAT10
XAT16

18
3.3 Product design
Decomposition chart

19
Assembly drawing

20
3.4 Product main components
Module
Power Supply
Receiving card
DC output cables（9 pcs）
Flat cables (9 pcs)