Samsung HM3600 User manual

HM3600
Headset

English...................................................................................1
Deutsch ...............................................................................25
Polski...................................................................................49
Türkçe..................................................................................75
Česky...................................................................................99
Magyar...............................................................................123

English
1
Getting started
Your headset overview ......................................................................... 4
Button functions.................................................................................... 5
Charging the headset ........................................................................... 6
Wearing the headset ............................................................................ 8
Using your headset
Turning the headset on or off................................................................9
Pairing and connecting the headset ................................................... 10
Pairing via the Active pairing feature .................................................. 13
Using call functions............................................................................. 14
Appendix
Frequently asked questions................................................................ 18
Warranty and parts replacement ........................................................ 20
Correct disposal of this product..........................................................21
Correct disposal of batteries in this product ....................................... 22
Specications ..................................................................................... 23
Contents
English

2
Please read this manual before operating your headset, and keep it for future reference.
Graphics used in this manual is for illustration purposes. The actual products may vary.
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or transmitted in
any form or by any means, electronic or mechanical, including photocopying, recording, or
storing in any information storage and retrieval system, without the prior written permission
of Samsung Electronics.
Trademarks
SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung•Electronics.
Bluetooth•
®
is a registered trademark of the Bluetooth SIG, Inc. worldwide.
More information about Bluetooth is available at www.bluetooth.com.
All other trademarks and copyrights are the property of their respective owners.•

English
3
Please read all Safety precautions before using your headset to ensure safe and
proper use.
Safety precautions
When using your headset while driving, follow local regulations in the region you are in.•
Never disassemble or modify your headset for any reason. Doing this may cause the•
headset to malfunction or become combustible. Bring the headset to an authorised service
centre to repair it.
Keep your device and all accessories out of the reach of small children or animals. Small•
parts may cause choking or serious injury if swallowed.
Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above 45 °C).•
Extreme temperatures can cause the deformation of the device and reduce the charging
capacity and life of your device.
Do not allow your device to get wet — liquids can cause serious damage. Do not handle•
your device with wet hands. Water damage to your device can void your manufacturer’s
warranty.
Avoid using your device’s light close to the eyes of children or animals.•
Do not use the device during a thunderstorm. Thunderstorms can cause the device to•
malfunction and increase the risk of electric shock.
Excessive exposure to loud sounds can cause hearing damage. Exposure to loud
sounds while driving may distract your attention and cause an accident. Use only
the minimum volume setting necessary to hear your conversation.

4
Getting started
This section explains the basic parts and functions of your Bluetooth headset.
Your headset overview
Make sure you have the following items with your headset: travel adapter, ear•rubbers, earhook and user manual.
The items supplied with your headset may vary depending on your region.•
Earhook
Power switch
Noise cancellation
microphone
Indicator light
Volume button
Multi-Function
button
Primary
microphone

English
5
Button functions
Button Function
Power
switch Slide the switch to turn the headset on or off.
Talk Press and hold to enter Pairing mode.•Press to make or answer a call.•Press to end a call.•
Volume
Press to adjust the volume.•During a call, press and hold to turn the microphone on or•off.
In Pairing mode, press and hold the Volume up button to•turn the Multi-point feature on.
In Pairing mode, press and hold the Volume down button to•turn the Multi-point feature off.
Press and hold both sides of the Volume key simultaneously•to turn the indicator light on or off.
You can hear a beep when the volume level of the headset reaches it’s lowest or
highest level.

6
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure
that you fully charge the battery before using the headset for the rst time.
1Connect the charger to the headset (see below images).
2Plug the charger to the wall outlet.
During charging, the indicator light will turn red. If charging does not begin,
unplug the travel adapter and plug it in again.
3When the headset is fully charged, the indicator light changes to blue. Unplug
the travel adapter from the power outlet and the headset.

English
7
Use only Samsung-approved chargers. Unauthorised chargers may cause an•explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because it is•a consumable part.
When a call come in while charging, disconnect your headset from the travel•adapter and answer the call.
When the battery charge gets low
The headset beeps and the indicator light ashes red. Recharge the battery. If the
headset powers off during a call, the call will be automatically transferred to the
phone.
Checking the battery level
To check the battery level, hold down the Volume down button and the Talk button
at the same time. Depending on the battery level, the indicator light ashes 5 times
in one of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red

8
Wearing the headset
Place the headset on your ear. Depending on which ear you are going to wear the
headset, simply adjust the ear hook accordingly.
To ensure you get the best performance from your headset.
Keep the distance between your headset and device as small as possible and•avoid placing your body or other objects in the signals path.
If you usually use your mobile phone with your right hand, wear the headset•on your right ear.
Covering your headset or device could effect its performance so keep contact to a•minimum.
▲ Left ▲ Right

English
9
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Activated functions and features may differ depending on the phone type.•
Some devices, especially those that are not tested or approved by Bluetooth SIG,•may be incompatible with your headset.
Turning the headset on or off
To turn the headset on, slide up the power switch. The blue indicator light•
ashes 4 times.
To turn the headset off, slide down the power switch. The indicator light ashes •
red then turns off.

10
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetooth
enabled devices, such as a Bluetooth phone and a Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired. When
trying to pair the two devices, keep the headset and the phone reasonably close
together. After pairing, the two devices will connect automatically when switched
on.
Pairing and connecting the headset with a phone
1Enter Pairing mode.
Turn on your headset and press and hold the Talk button until the blue•
indicator light stays lit.
If you are turning on the headset for the rst time, it will go into Pairing •
mode immediately.
2Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3Select the headset (HM3600) from the list of devices found by your phone.
4 If requested, enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.

English
11
Your headset supports the Simple Pairing feature which allows the headset to be
paired with a phone without requesting a PIN. This feature is available for phones
that are compliant with Bluetooth version 2.1 or higher.
The headset can also be paired via the Active pairing feature, see page 13.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2
Bluetooth phones at the same time.
1 After connecting with the rst Bluetooth phone, press and hold the Talk button
until the blue indicator light stays lit.
2Press and hold the Volume up button to activate the Multi-point feature.
3Activate the Bluetooth feature on the second Bluetooth phone and search for
the headset (see your phone’s user manual).
4Select the headset (HM3600) from the list of devices found by the second
Bluetooth phone.
5If requested, enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to
the phone.
6Turn the headset off and on. Once the headset has switched on, it will
automatically connect with both Bluetooth phones.

12
When connecting the headset to 2 Bluetooth phones, some phones may not be able
to connect as a second Bluetooth phone.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.•
Use the Bluetooth menu on your phone to remove the device from your pairing•
list.
Reconnecting the headset
When the headset is already paired with a phone, it will attempt to automatically
reconnect each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.•
Use the Bluetooth menu on your phone.•
If the Multi-point feature is activated, your headset will re-connect with the rst and
second phone. To turn Multi-point feature on or off, see page 5.

English
13
Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search for
a Bluetooth phone and try to make a connection with it.
This feature is available for mobile phones, but the phone’s Bluetooth visibility option
must be set to on.
1Turn on the headset.
2Press and hold the Talk button to enter Pairing mode.
3Press and hold the Talk button until the violet indicator light turns on.
The headset will switch to Active Pairing mode, search for a Bluetooth phone
within range, and attempt to pair with it.
Ensure the phone you wish to connect to is within range of the headset. Place the•headset and phone close to each other to avoid pairing with other devices.
The Bluetooth phone you want to connect with must not be paired with other•devices. If the phone is already connected to another device, end the connection
and restart the Active pairing feature.
This feature may not be available on some PDA’s.•

14
Using call functions
Available call functions may vary from phone to phone.•
For better sound quality during a call, avoid covering the secondary microphone.•
Making a call
Redialling the latest number
Press the Talk button to redial the latest number on the most recently connected
phone.
Press the Talk button twice to redial the latest number on a second phone,
see page 11.
For some phones, pressing the Talk button opens the call log list. Press the Talk
button again to dial the selected number.
Dialling a number by voice
Press and hold the Talk button and say a name. You can dial a number only on the
rst phone.

English
15
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.
If you receive two calls at the same time on two paired phones, you can only
answer the call on the rst phone.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
If you receive two calls at the same time on two paired phones, you can only reject
the call on the rst phone.
This function is only available when using the Hands-Free prole. For more
information, see your phone’s user manual.

16
Options available during a call
You can use the following functions during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that
the person with whom you are speaking cannot hear you. When the microphone is
turned off, the headset beeps at regular intervals. Press and hold the Volume up or
down button again to turn the microphone back on.
Turning the indicator light on or off
Press and hold both sides of the Volume key simultaneously to turn the indicator
light on or off.
Transferring a call from the phone to the headset
Press the Talk button to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
This function is only available when using the Hands-Free prole. For more
information, see your phone’s user manual.

English
17
Answering a second call
Press the Talk button to end the rst call and answer a second call on the same •
phone when you hear call waiting tones.
Press and hold the Talk button to place the rst call on hold and answer a •
second call of the same phone when you hear call waiting tones.
To switch between the current call and the held call, press and hold the Talk•
button.
This function is only available when using the Hands-Free prole. For more
information, see your phone’s user manual.
Answering a new call on a second phone
Press the Talk button to end the rst call and answer the call on the second •
phone when you hear call waiting tones.
Press and hold the Talk button to place the rst call on hold and answer the call •
on the second phone when you hear call waiting tones.
To switch between the current call and the held call, press and hold the Talk•
button.
This function is only available when using the Hands-Free prole. For more
information, see your phone’s user manual.

18
Appendix
Frequently asked questions
Will my headset work
with laptops, PCs, and
PDAs?
Your headset will work with devices that support
your headset's Bluetooth version and proles.
For specications, see page 23.
Why do I hear static or
interference while on
a call?
Appliances such as cordless phones and wireless
networking equipment may cause interference, which
usually sounds like static. To reduce any interference,
keep the headset away from other devices that use or
produce radio waves.
Will my headset
interfere with my car's
electronics, radio, or
computer?
Your headset produces signicantly less power than
a typical mobile phone. It also only emits signals that
are in compliance with the international Bluetooth
standard. Therefore, you should not expect any
interference with standard consumer-grade electronics
equipment.