Samsung HM5000 User manual

English...................................................................................1
Français...............................................................................25
Italiano.................................................................................51
Ελληνικά..............................................................................77
Nederlands........................................................................105

1
English
Contents
Getting started
Your headset overview ............................................................................4
Button functions.......................................................................................5
Charging the headset ..............................................................................6
Wearing the headset ...............................................................................8
Using your headset
Turning the headset on or off...................................................................9
Activating Vibration mode......................................................................10
Pairing and connecting the headset ......................................................10
Pairing via the Active pairing feature .....................................................14
Using call functions................................................................................14
Appendix
Frequently asked questions...................................................................18
Warranty and parts replacement ...........................................................20
Correct disposal of this product.............................................................21
Correct disposal of batteries in this product ..........................................22
Specications ........................................................................................23
English

2
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval
system, without the prior written permission of Samsung Electronics.
Trademarks
SAMSUNG, and the SAMSUNG logo are registered trademarks of•Samsung Electronics.
Bluetooth•®is a registered trademark of the Bluetooth SIG, Inc. worldwide.
More information about Bluetooth is available at www.bluetooth.com.
All other trademarks and copyrights are the property of their respective•owners.
Please read this manual before operating your headset, and keep it for future
reference. Graphics used in this manual are for illustration purposes. The
actual products may vary.

3
English
Please read all Safety precautions before using your headset to ensure safe
and proper use.
Safety precautions
When using your headset while driving, follow local regulations in the region you•are in.
Never disassemble or modify your headset for any reason. Doing this may cause•the headset to malfunction or become combustible. Bring the headset to an
authorised service centre to repair it.
Keep your device and all accessories out of the reach of small children or animals.•Small parts may cause choking or serious injury if swallowed.
Avoid exposing your device to very cold or very hot temperatures (below 0 °C or•above 45 °C). Extreme temperatures can cause the deformation of the device and
reduce the charging capacity and life of your device.
Do not allow your device to get wet — liquids can cause serious damage. Do not•handle your device with wet hands. Water damage to your device can void your
manufacturer’s warranty.
Avoid using your device’s light close to the eyes of children or animals.•
Do not use the device during a thunderstorm. Thunderstorms can cause the device•to malfunction and increase the risk of electric shock.
Excessive exposure to loud sounds can cause hearing damage. Exposure
to loud sounds while driving may distract your attention and cause an
accident. Use only the minimum volume setting necessary to hear your
conversation.

4
Getting started
Your headset overview
Make sure you have the following items: Travel adapter, headset,•
and user manual.
The supplied items may be changeable depending on your region.•
Mounting clip
Speaker
Indicator light
Volume button Talk button
Charging socket
Microphone

5
English
Button functions
Button Function
Talk
Press and hold to turn the headset on.•
Press and hold for 3 seconds to turn the headset off.•
With the headset turned off, press and hold for•3 seconds to enter Pairing mode.
Press to make or answer a call.•
Press to end a call.•
Press and hold to reject incoming call.•
Press and hold to place a call on hold.•
Press and hold to switch between calls.•
Volume Press to adjust the volume.•
Press and hold to turn the microphone on or off.•

6
Charging the headset
This headset has a rechargeable internal battery which is non-removable.
Make sure the headset is fully charged before using it for the rst time.
To check the battery level, see page 7.
1Connect the charger to the charging
socket on the headset.
2Plug the charger in to the wall outlet.
During charging, the indicator light will turn
red. If charging does not begin, unplug the
travel adapter and plug it in again.
3When the headset is fully charged, the red
indicator light changes to blue. Unplug the
travel adapter from the wall outlet and the
headset.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung•
chargers could cause damage to the headset or in extreme circumstances
an explosion, it could also invalidate any warranty on the product.
Never make or receive calls while charging, always disconnect your•
headset from the charger and answer the call.

7
English
Repeatedly charging and discharging of the headset, over time will•
cause the battery performance to diminish. This is normal for all
rechargeable batteries.
To save energy, unplug the travel adapter when not in use. The travel•
adapter does not have a power switch, so you must unplug the travel
adapter from the outlet to interrupt the power supply. The travel adapter
should remain close to the socket when in use.
When the headset battery is low
The headset beeps and the indicator light ashes red. To charge the battery,
see page 6. If the headset powers off during a call, the call will be automatically
transferred to the phone.
Checking the battery level
To check the battery level, press
and hold the Volume down button
and the Talk button at the same
time. Depending on the battery level,
the indicator light ashes 5 times in
one of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red

8
Wearing the headset
Do not bend the mounting clip away from the body or apply too much•
pressure on it as this could cause permanent damage to the clip or
headset.
If you have poor call quality issues, make sure that the earbud is•
properly placed over the ear hole or the microphone is not blocked.
The call quality may vary depending on how you grip your bluetooth•
headset. To minimize interference, we recommend you hold the middle
bottom part of the headset while talking on the phone.

9
English
Using your headset
This section explains how to turn the headset on or off, pair and connect the
headset to the phone, and use various functions.
Activated functions and features may differ depending on the phone•
type.
Some devices, especially those that are not tested or approved by the•
Bluetooth Special Interest Group (SIG), may be incompatible with your
headset.
To ensure you get the best performance from your headset
Keep the distance between your headset and device as small as possible•
and avoid placing your body or other objects in the signals path.
Covering your headset or device could effect its performance so keep•
contact to a minimum.
Turning the headset on or off
To turn the headset on
Press and hold the Talk button. The blue indicator light ashes 4 times.

10
To turn the headset off
Press and hold the Talk button for 3 seconds. The indicator light ashes blue
and red then turns off.
Activating Vibration mode
You can change the headset setting to vibrate when you receive a phone call,
turn the Headset on or off.
To activate Vibration mode
Press•and hold the Talk button and the Volume up button at the same time.
Your headset will vibrate if the vibration mode is activated successfully.
To deactivate Vibration mode
Press and hold the Talk button and the Volume up button at the same time•
until the blue indicator light turns red and ashes twice.
Pairing and connecting the headset
Pairing means unique and encrypted wireless connection between two
Bluetooth devices when they agree to communicate with each other. In Pairing
mode, two devices should be placed close enough to each other.

11
English
Pairing and connecting the headset with a phone
1Enter Pairing mode.
With the headset turned off,•press and hold the Talk button for
3 seconds. The blue indicator light stays lit.
With the headset turned on, press and hold the Talk button and the•
Volume up button at the same time. The blue indicator light stays lit.
If the headset is turned on for the rst time, it will go into Pairing mode •
immediately and the Pairing mode stays for 3 minutes.
2Activate the Bluetooth feature on your phone and search for the headset
(see your phone’s user manual).
3Select the headset (HM5000) from the list of devices found by your phone.
4If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect
the headset to your phone.
Your headset supports the Simple Pairing feature which allows the
headset to be paired with a phone without requesting a PIN. This feature
is available for phones that are compliant with Bluetooth version 2.1 or
higher.
The headset can also be paired via the Active Pairing feature. See page 14.

12
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2
Bluetooth phones at the same time.
1 Connect with the rst Bluetooth phone.
2Press and hold the Talk button and the Volume up button at the same time
to enter Pairing mode.
3Press and hold the Volume up button to activate Multi-point feature.
4Activate the Bluetooth feature on the second Bluetooth phone and search
for the headset (see your phone’s user manual).
5Select the headset (HM5000) from the list of devices found by the second
Bluetooth phone.
6If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset
to the second Bluetooth phone.
7 Reconnect to the headset from the rst Bluetooth phone.
When connecting the headset to 2 Bluetooth phones, some phones may
not be able to connect as a second Bluetooth phone.

13
English
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button. The blue indicator
light ashes 3 times.
To turn Multi-point feature off
In Pairing mode, press and hold
the Volume down button. The red
indicator light ashes 3 times.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone to remove
the device from your pairing list.
Reconnecting the headset
If the headset loses the connection to the paired phone,
Press the Talk button on the headset or use the Bluetooth menu on your•
phone.
Your headset will attempt to automatically reconnect each time you turn it on.
This feature may be unavailable on some phones.
If the Multi-point feature is activated, your headset will attempt to
reconnect to the two most recently connected phones.

14
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth
device and tries to make a connection with it.This feature is available for mobile
phones, but the phone’s Bluetooth visibility option must be set to on.
1In Pairing mode, press and hold the Talk button to enter Active pairing
mode. To enter Pairing mode, see page 11.
2The violet indicator light turns on and the headset will search for
a Bluetooth phone within range, and attempt to pair with it.
Ensure the phone you wish to connect to is within range of the•
headset. Place the headset and phone close to each other to avoid
pairing with other devices.
The Bluetooth phone you want to connect with must not be paired with•
other devices. If the phone is already connected to another device,
end the connection and restart the Active pairing feature.
This feature may not be available on some devices.•
Using call functions
Available call functions may differ from phone to phone.

15
English
Making a call
Redialling the latest number
To redial the latest number on the primary phone,
Press the Talk button.•
To redial the latest number on the secondary phone,
Press the Talk button twice.•
For some phones, pressing the Talk button opens the call log list. Press
the Talk button again to dial the selected number.
Dialling a number by voice
Press and hold the Talk button and say a name.
This function is only available on the primary phone using the•
Hands‑Free prole.
This function may not be available on some devices.•
Answering a call
When a call is being recieved you will hear a tone, the blue indicator light
ashes twice and if the Vibration mode is activated, your headset will vibrate.
Press the Talk button to answer a call.

16
If you receive calls on both connected devices at the same time you can
only answer the call on the primary phone.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
If you receive calls on both connected devices at the same time you•
can only reject the call on the primary phone.
This function is only available when using the Hands‑Free prole.•
Options available during a call
You can use the following functions during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
You will hear a beep when the volume level of the headset reaches it’s
lowest or highest level.

17
English
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off
so that the person with whom you are speaking cannot hear you. When the
microphone is turned off, the headset beeps at regular intervals. Press and
hold the Volume up or down button again to turn the microphone back on.
Transferring a call from the phone to the headset
Press the Talk button on the headset to transfer a call from the phone to the
headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
This function is only available when using the Hands‑Free prole.
Answering a second call
Press the Talk button to end the rst call and answer a second call. •
Press and hold the Talk button to place the rst call on hold and answer •
a second call. To switch between the current call and the held call, press
and hold the Talk button.
This function is only available when using the Hands‑Free prole.

18
Appendix
Frequently asked questions
Will my headset work
with laptops, PCs,
and PDAs?
Your headset will work with devices that support
your headset’s Bluetooth version and proles.
For specications, see page 23.
Will anything cause
interference with
my conversation
when I am using my
headset?
Appliances such as cordless phones and wireless
networking equipment may cause interference with
your conversation, usually adding a crackling noise.
To reduce any interference, keep the headset away
from other devices that use or produce radio waves.
Will my headset
interfere with my
car’s electronics,
radio, or computer?
Your headset produces signicantly less power
than a typical mobile phone. It also only emits
signals that are in compliance with the international
Bluetooth standard. Therefore, you should not
expect any interference with standard consumer-
grade electronics equipment.