Samsung WEP301 - Headset - Over-the-ear User manual

Headquarters:
1301 East Lookout Drive Richardson,
TX 75082
Internet Address:
http://www.samsungmobileusa.com/
accessories
Customer Care Center:
1-888-987-4357
▪
▪
▪
Guide No.: GH68-18612A
04/2008. Rev. 1.0
Your headset overview
Left Right
Volume up
button Volume down
button
Multi-function
button
Microphone
Indicator light
Reset button
Earpiece
Ear hook
NOTE:
Depending on which ear you will wear the headset, simply
adjust the ear hook accordingly.
Checking the accessories
Make sure you have the following items with your
headset : Travel Adapter, User's Guide,
3 Earpiece Covers(Large, Medium, Small)
NOTE:
The items supplied with your headset may vary depending
on your region.
Charging the headset
Put the adapter into the jack on the
headset and into the electrical outlet.
Charge the headset until the red
indicator light turns blue.
NOTE:
Do not attempt to charge the headset with anything
other than the adapter provided.
You can use your headset while charging.
•
•
Turning the headset on or off
To turn the headset on, press and hold the Multi-
function button until the blue indicator light ashes
4 times. To turn the headset off, press and hold the
Multi-function button until both blue and red indicator
lights ash.
Understanding various modes
Standby mode: The headset is waiting for a call.
The blue indicator light ashes every 3 seconds.
Active mode: The headset has a call in progress.
The blue indicator light ashes every 8 seconds.
Pairing mode: The blue indicator light stays lit.
You can discover and connect to your headset on
your phone.
Low battery mode: There is less than 10% of
battery power left. The red indicator light ashes.
You must recharge the battery.
•
•
•
•

Pairing with your Bluetooth phone
1Enter Pairing mode.
Turn off your headset and press and hold the
Multi-function button until the blue indicator light
remains lit after blinking.
If you turn it on for the rst time, it proceeds
into Pairing mode immediately.
2Search for and pair with your phone according to
your phone’s user guide. (Bluetooth PIN: 0000, 4
zeros)
If the pairing is successful, the blue indicator
light will ash 10 times rapidly before entering
Standby mode.
If the blue indicator light remains lit, retry
pairing.
•
•
•
•
NOTE:
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the Multi-function
button to reconnect.
Using call functions
Some features may not be supported by your phone.
In Standby mode
Press the Multi-function button to:
Answer an incoming call
Redial the last number called
Press and hold the Multi-function button to:
Make a voice-activated call
Reject an incoming call
Press and hold [+] and [-] at the same time to turn
the indicator light on or off.
•
•
•
•
In Active mode
Press the Multi-function button to:
End a call
Transfer a call from the phone to the headset
Press and hold the Multi-function button to:
Place a call on hold
Answer a second call
Retrieve a call on hold
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off
or on.
•
•
•
•
•
Specications
Item Specications and description
Bluetooth version Compatible with Bluetooth 2.0 or
earlier
Support prole Headset Prole, Hands-Free Prole
Operating range Up to 30 feet (10 meters)
Standby time Up to 80 hours*
Talk time Up to 5 hours*
* Depending on the phone type and usage, the actual time may
vary.