Samsung HS3000 User manual

English......................................................................................... 1
Română .....................................................................................30
Български.................................................................................60
Srpski.........................................................................................92
Hrvatski ...................................................................................122

English
1
Contents
Getting started
Your headset overview..........................................................................................................4
Button functions......................................................................................................................5
Charging the headset............................................................................................................6
Wearing the headset..............................................................................................................8
Using your headset
Turning the headset on or o.............................................................................................9
Using voice prompts........................................................................................................... 10
Pairing and connecting the headset............................................................................. 12
Pairing via the Active pairing feature............................................................................ 16
Using call functions ............................................................................................................. 17
Using music control functions ........................................................................................ 21
Resetting the headset......................................................................................................... 22
Appendix
Frequently asked questions..............................................................................................23
Warranty and parts replacement.................................................................................... 25
Specications......................................................................................................................... 26
Correct disposal of this product...................................................................................... 27
Correct disposal of batteries in this product.............................................................. 28
English

2
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval system,
without the prior written permission of Samsung Electronics.
Trademarks
• SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung
Electronics.
• Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More
information about Bluetooth is available at www.bluetooth.com.
• All other trademarks and copyrights are the property of their respective owners.
Please read this manual before operating your headset, and keep it for future reference.
Graphics used in this manual are for illustration purposes. The actual products may vary.

English
3
Safety precautions
To prevent injury to yourself and others or damage to your device, read the safety
information about your device before using the device.
• Comply with all safety warnings and regulations regarding mobile device usage
while operating a vehicle.
• Donotdisassemble,modify,orrepairyourdevice.Anychangesormodicationsto
your device can void your manufacturer’s warranty. If your device needs servicing,
take your device to a Samsung Service Centre.
• Do not bite or suck the device. Children or animals can choke on small parts.
• Do not store your device in very hot or very cold areas. It is recommended to
use your device at temperatures from 5 °C to 35 °C. Extreme temperatures can
damage the device and reduce the charging capacity and life of your device and
battery.
• Do not use your device while it is charging or touch your device with wet hands.
• Keep your device dry. Humidity and liquids may damage the parts or electronic
circuits in your device. Water damage to your device can void your manufacturer’s
warranty.
• Do not use your device outdoor during a thunderstorm. Doing so may result in
electric shock or device malfunction.

4
Getting started
Your headset overview
Volume button
Mode button 3.5 mm audio jack
Microphone
Indicator light
Power switch
Talk button
Multifunction jack
Control button
• Make sure you have the following items: travel adapter, headset,
3.5 mm stereo headphone, and user manual.
• The supplied items may be changeable depending on your region.

English
5
Button functions
Button Function
Power
Switch • Slide up or down to turn the headset on or o.
Talk
• Press and hold for 4 seconds to enter Pairing mode.
• Press to make or answer a call.
• Press to end a call.
• Press and hold to reject incoming call.
• Press and hold to place a call on hold.
• Press and hold to switch between calls.
Volume • Press to adjust the volume.
• Press and hold to turn the microphone on or o.
Mode • While listening to music, press to change the
SoundAlive mode.
• Press to control the music les.

6
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make sure
the headset is fully charged before using it for the rst time. To check the battery
level, see page 7.
1Connect the charger to the multifunction jack.
2Plug the charger in to the wall outlet. During
charging, the indicator light will turn red. If
charging does not begin, unplug the travel
adapter and plug it in again.
3When the headset is fully charged, the red
indicator light changes to blue. Unplug the travel
adapter from the wall outlet and the headset.
• Use only Samsung-approved chargers. Unauthorised or non-Samsung
chargers could cause damage to the headset or in extreme circumstances
an explosion, it could also invalidate any warranty on the product.
• Never make or receive calls while charging, always disconnect your headset
from the charger and answer the call.

English
7
• Repeatedly charging and discharging of the headset, over time will cause
the battery performance to diminish. This is normal for all rechargeable
batteries.
• To save energy, unplug the charger when not in use. The charger does not
have a power switch, so you must unplug the charger from the electric
socket when not in use to avoid wasting power. The charger should remain
close to the electric socket and easily accessible while charging.
When the headset battery is low
The headset beeps and the indicator light ashes red. If the headset powers o
during a call, the call will be automatically transferred to the phone.
Checking the battery level
To check the battery level, hold down the Volume down button and the Talk button
at the same time. Depending on the battery level, the indicator light ashes 5 times in
one of the following colours:
Battery level Indicator light colour Voice prompt
Above 80% Blue “Headset battery level is high”
80 ~20% Violet “Headset battery level is medium”
Below 20% Red “Headset battery level is low”

8
Wearing the headset
Use the supplied 3.5 mm stereo headphone.
1Connect the headphone to the headset.
2Clip the headset to your clothes using it’sshirt
clip.
Using your headset
This section explains how to turn the headset on or o, pair and connect the headset
to the phone, and use various functions.
• Activated functions and features may dier depending on the phone type.
• Some devices, especially those that are not tested or approved by the
Bluetooth Special Interest Group (SIG), may be incompatible with your
headset.

English
9
To ensure you get the best performance from your headset
• Keep the distance between your headset and device as small as possible and
avoid placing your body or other objects in thesignals path.
• If you usually use your mobile phone with your right hand, wear theheadset on
your right ear.
• Covering your headset or device could eect its performance sokeep contact to
a minimum.
Turning the headset on or o
To turn the headset on
Slide down the power switch. The blue indicator light ashes 4 times and you will
hear “Power on”.
If the headset is turned on for the rst time, you will hear “Thank you for using
the Samsung Bluetooth headset. Press both volume buttons simultaneously to
conrm language”.
To turn the headset o
Slide up the power switch. The indicator light ashes blue and red then turns o and
you will hear “Power o”.

10
Using voice prompts
Voice prompts will inform you about the current status of the headset and usage
instructions. If you can’t hear any voice prompts, make sure the voice prompt feature
is turned on.
Changing the language for the voice prompt
The headset provides the following languages: English, Spanish, French, German and
Chinese. The default setting is English.
• In Pairing mode, press both volume buttons simultaneously to select language.
Toenter Pairing mode, see page 12.
Turning the voice prompt on or o
To turn voice prompts on
In Pairing mode, press and hold the Volume up button for 4 seconds. You will hear
“Voice prompt is on”.
To turn voice prompts o
In Pairing mode, press and hold the Volume down button for 4 seconds. You will
hear “Voice prompt is o”.

English
11
The following voice prompts are available depending on the status:
Status Voice prompt
When you turn the headset
on or o
“Power on” or
“Power o”
When you select
alanguage for the voice
prompt
“Language name selected”
When you enter
Pairingmode
“Ready to pair. Search for the headset from
theBluetooth menu. Enter 0000 if prompted foraPIN”
When you turn the voice
prompt on or o
“Voice prompt is on” or
“Voice prompt is o”
When you turn Multi-point
feature on or o
“Multi-point mode is on” or
“Multi-point mode is o”
When you connect the
headset to the devices
“Device is connected” or
“Two devices are connected”
When you disconnect the
headset from the device “Device is disconnected”

12
Status Voice prompt
When you reject or end
acall “Call terminated”
When you check the
battery level
“Headset battery level is high” or
“Headset battery level is medium” or
“Headset battery level is low”
Even though the voice prompt feature has been turned o, you can always
hear the following voice prompts.
• “Language name selected”
• “Voice prompt is on” or “Voice prompt is o”
Pairing and connecting the headset
Pairing means unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough to each other.

English
13
Pairing and connecting the headset with a phone
1Enter Pairing mode.
• With the headset turned on, press and hold the Talk button for 4 seconds.
The blue indicator light stays lit and you will hear “Ready to pair. Search for
the headset from the Bluetooth menu. Enter 0000 if prompted for aPIN”.If you
can’t hear any voice prompt, make sure the voice prompt feature is turned on.
Toturn the voice prompt on or o, see page 10.
• If the headset is turned on for the rst time, it will go into Pairing mode
immediately and the Pairing mode stays for 3 minutes.
2Activate the Bluetooth feature on your phone and search for the headset
(seeyour phone’s user manual).
3Select the headset (HS3000) from the list of devices found by your phone.
4If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the
headset to your phone. You will hear “Device is connected”.
• Your headset supports the Simple Pairing feature which allows the headset
to be paired with a phone without requesting a PIN. This feature is available
for phones that are compliant with Bluetooth version 2.1 or higher.
• If your phone supports Advanced Audio Distribution Prole (A2DP), you
can also listen to music with your headset.
The headset can also be paired via the Active Paring feature. See page 16.

14
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2 Bluetooth
phones at the same time.
1Connect with the rst Bluetooth phone.
2Press and hold the Talk button for 4 seconds to enter Pairing mode.
3Press and hold the Volume up button to activate Multi-point feature.
4Activate the Bluetooth feature on the second Bluetooth phone and search
for the headset (see your phone’s user manual).
5Select the headset (HS3000) from the list of devices found by the second
Bluetooth phone.
6If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to
the second Bluetooth phone.
7Reconnect to the headset from the rst Bluetooth phone. You will hear
“Twodevices are connected”.
Some phones may not be able to connect as a second Bluetooth phone.

English
15
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button.The blue indicator light
ashes twice and you will hear “Multi-
point mode is on”.
To turn Multi-point feature o
In Pairing mode, press and hold the
Volume down button. The red indicator
light ashes twice and you will hear
“Multi-point mode is o”.
Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an MP3
player. The process of connecting to a music device is the same as for connecting
with a phone. When connected to both devices (phone and music device) you can
make or receive a call on the phone while listening to music from the music device.
For more information about control functions, see page 21.
Disconnecting the headset
Turn o the headset or use the Bluetooth menu on your phone to remove the device
from your pairing list.
Reconnecting the headset
To reconnect to the paired phone
Press the Talk button on the headset or use the Bluetooth menu on your phone.

16
To reconnect to the paired music device
Press button on the headset or use the Bluetooth menu on your music device.
Your headset will attempt to automatically reconnect each time you turn iton. If the
Multi-point feature is activated, your headset will attempt to reconnect to the two
most recently connected devices.This feature may be unavailable on some devices.
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth
device within range and tries to make a connection with it.
1The phone’s Bluetooth visibility option must be set to on.
2Place the headset and phone close to each other to avoid pairing with other devices.
3In Pairing mode (solid blue indicator light), press and hold the Talk button on
the headset. The indicator light color changes to violet. The headset will attempt
active paring for up to 20 seconds. To enter Pairing mode, see page 12.

English
17
• This feature may not be available on some devices.
• The Bluetooth phone you want to connect with must not be paired with
other devices. If the phone is already connected to another device, end the
connection and restart the Active pairing feature.
• When the headset pair with your phone, a connection is made through the
Hands-Free Prole. To make a connection through another prole, such as
Advanced Audio Distribution Prole (A2DP), check the phone’s user manual
on how to pair the Bluetooth device.
Using call functions
Available call functions may dier from phone to phone.
Making a call
Redialling the latest number
To redial the latest number on the primary phone:
• Press the Talk button.

18
To redial the latest number on the secondary phone:
• Press the Talk button twice.
For some phones, pressing the Talk button opens the call log list. Press the Talk
button again to dial the selected number.
Dialling a number by voice
Press and hold the Talk button and say a name.
This function is only available on the primary phone using the Hands-Free
prole.
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.
• If you receive calls on both connected devices at the same time youcan
only answer the call on the primary phone.
• When you are listening to music, the music stops during a call.
Ending a call
Press the Talk button to end a call. You will hear “Call terminated”.