Samsung WEP200 - WEP 200 - Headset User manual

English
1
Contents
Thank you ................................................................................ 2
Drive safety .............................................................................. 2
Headset overview ...................................................................... 3
Checking phone compatibility ...................................................... 4
Charging Bluetooth headset ........................................................ 4
Turning the headset on/off.......................................................... 7
‘Pair’ to your Bluetooth phone ..................................................... 9
Wearing the headset .................................................................. 11
Making a call............................................................................. 11
Ending a call ............................................................................. 12
Answering a call ........................................................................ 12
Adjusting the volume ................................................................. 12
Using Enhanced features ............................................................ 13
Switching off the microphone ...................................................... 14
Frequently asked questions......................................................... 15
Storage of the headset ............................................................... 17
Certification and safety approvals ................................................ 18
Warranty and parts replacement.................................................. 22
Correct Disposal of This Product .................................................. 24
Glossary................................................................................... 25

2
Thank you
Thank you for purchasing the Samsung Bluetooth Headset
WEP200, we hope you will be delighted with its operation.
Please read this user’s guide to get started and to make best
use of the headset’s many features.
Drive safety
Using a mobile phone while driving creates a distraction to the
driver which may increase the likelihood of an accident.
When using the phone while driving, keep conversations short
and do not make notes or read documents. Before answering
calls consider your circumstances. Pull off the road and park
before making or answering calls when driving conditions
require (e.g. bad weather, high traffic density, presence of
children in the car, difficult junctions or manoeuvres.)
Remember, driving comes first, not the call!
Abide by local laws.

English
3
Headset overview
Charging socket
Volume Control
Button
Blue Indicator
Light
Microphone
Multi-Function
Button

4
BEFORE USING YOUR HEADSET
Checking phone compatibility
The Samsung Bluetooth headset WEP200 is compatible with
most Bluetooth
1
(see Glossary ) phones that are compliant
with Bluetooth version 1.2 or higher specification and support
the headset and/or hands-free profile(s)
2
. Ensure that your
phone has Bluetooth capability by visiting your phone
manufacturer’s web site.
Charging Bluetooth headset
Samsung Bluetooth headset WEP200 uses a rechargeable
battery that must be charged fully before you use the headset
for the first time.

English
5
1 Put the headset in the case supplied with the headset and
close the case.
2 Plug the AC charging adaptor into the case's charging
socket.
3 Plug the AC adaptor into the electrical outlet.

6
4 Charge your headset until the red light turns to green light
on the headset.
5 The headset will be fully charged in approximately 2 hours.
6 Remove AC charging adaptor from the case. You are now
ready to ‘pair’ headset to your mobile phone. If the
headset has already been paired to your phone, then you
can begin using it.
WARNING
Do not attempt to charge the headset with
anything other than the AC adaptor
provided. Using another AC adaptor may
damage or destroy the headset.
IMPORTANT
The red indicator light will be on while
charging and will turn green when
charging is complete. Removing the
charger from the case during charging will
put the headset into Standby mode and
stop the charging sequence.
IMPORTANT
IMPORTANT: The headset cannot be used
while charging.
Read the glossary at the end of this document to familiarise
yourself with important terms used in this guide.

English
7
BASIC OPERATIONS
Turning the headset on/off
To Press and hold You can hear You can see
Turn i ng the
headset on
the Multi-Function
Button for 4 seconds
until you see a
burst of 4 flashes
on the blue indicator
light, then release.
Single tone. The blue indicator
light will flash
while the power is
on (see Status of
the blue
indicator light ).
Turn i ng t he
headset off
the Multi-Function
Button for 4 seconds
until you see a
burst of 2 flashes
on the blue indicator
light, then release.
Series of 2
tones.
The blue indicator
light will stop
flashing.

8
Status of the blue indicator light
Status You can hear Headset is in the
Flashes every 8
seconds.
Quick series of 2
tones
- (when Active mode
starts)
Active Mode
3
• Call in progress
• Up to 4 hours of talk-time
*
*. Depending on the phone type and usage, the actual time may
vary.
Flashes every 3
seconds.
Quick series of 2
tones
- (when Standby
mode starts)
Standby Mode
4
• Waiting for call
• Up to 100 hours of standby
time *
Red flashes
instead of Blue.
5 tones every 20
seconds
Low Battery
• about 1 minute of talk time
left
IMPORTANT
Do not hold the Multi-Function button down
for more than 4 seconds when turning the
headset on or else it may go into pairing
mode, and the blue indicator light will turn
on. If that happens, turn off the headset,
wait 3 to 5 seconds, and repeat process for
turning the headset on.

English
9
‘Pair’ to your Bluetooth phone
Pairing
5
will create a unique and encrypted wireless link
between two Bluetooth enabled devices such as your
Bluetooth phone and Bluetooth headset.
1 Ensure the headset is off (see Turning the headset on/
off
).
2 Press and hold the Multi-Function Button until the blue
indicator light turns on (approximately 8 seconds), then
release.

10
3 Set your Bluetooth phone to ‘discover’ the headset by
following your phone’s instruction guide. Typically, the
steps involve going to a ‘setup’, ‘connect’, or ‘Bluetooth’
menu
on your phone and then selecting the option to
‘discover’ a Bluetooth device.
4 Your phone will find the ‘Samsung WEP200’ headset and
ask if you want to pair with it. Confirm this by pressing
‘yes’ or ‘ok’.
5 Enter passkey or PIN
6
= 0000 ( 4 zeros ), then press
‘yes’ or ‘ok’.
IMPORTANT
If pairing was successful, the blue indicator
light will flash 10 times rapidly before going
to flashing every 3 seconds. If
unsuccessful, the light remains on, and you
will need to reattempt pairing.