Samsung SyncMaster 750DFT User manual

SyncMaster 750DFT
Color Monitor
Owner’s
Instructions

Safety Instructions
1
Before connecting the AC power
cord to an outlet, make sure the
voltage designation on your monitor
corresponds to the local electrical
supply.
2
Never insert anything metallic into
the monitor openings. Doing so may
create the danger of electric shock.
3
To avoid electric shock, never touch
the inside of the monitor. Only a
qualified technician should open the
monitor’s case.
4
Never use your monitor if the power
cord has been damaged. Do not
allow anything to rest on the power
cord, and keep the cord away from
areas where people can trip over it.
5
Be sure to hold the plug, not the
cord, when disconnecting the
monitor from an electric socket.
6
Openings in the monitor cabinet are
provided for ventilation. To prevent
overheating, these openings should
not be blocked or covered. Also,
avoid using the monitor on a bed,
sofa, rug, or other soft surface.
Doing so may block the ventilation
openings in the bottom of the
cabinet. If you put the monitor in a
bookcase or some other enclosed
space, be sure to provide adequate
ventilation.
7
Put your monitor in a location with
low humidity and a minimum of dust.
8
Do not expose the monitor to rain or
use it near water (in kitchens, near
swimming pools, etc.). If the monitor
accidentally gets wet, unplug it and
contact an authorized dealer
immediately. You can clean the
monitor with a damp cloth when
necessary, but be sure to unplug the
monitor first.
9
Place the monitor on a solid surface
and treat it carefully. The screen is
made of glass and can be damaged
if dropped, hit or scratched.
10
Locate your monitor near an easily
accessible AC outlet.
11
If your monitor does not operate
normally – in particular, if there are
any unusual sounds or smells
coming from it – unplug it
immediately and contact an
authorized dealer or service center.
12
High temperatures can cause
problems. Don’t use your monitor in
direct sunlight, and keep it away
from heaters, stoves, fireplaces, and
other sources of heat.
13
Unplug the monitor when it is going
to be left unused for an extended
period of time.
14
Unplug your monitor from the AC
outlet before any service.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

English 1
FrançaisEspañolDeutschItaliano EnglishPortuguese
Your New Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Speaker Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting Your Monitor & Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Control Viewing Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Multimedia Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Direct Access Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
On Screen Display (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Monitor function control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Horizontal Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Vertical Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Horizontal Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Vertical Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Pincushion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trapezoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Parallelogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Pinbalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
V-Linearity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
H- Moiré . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
V- Moiré . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Video Input Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Color Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Halftone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Degauss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Display Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OSD Lock/Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PowerSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inside back cover
Table of Contents

English 2
Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Left output cable
DC input cable
Stereo input cable
Manual
Power Cord
Warranty Card
(Not available in all locations)
Driver Installation Diskette
(Not available in all locations)
Speaker Assembly
Monitor
Stand Feet
Your New Monitor

English 3
FrançaisEspañolDeutschItaliano EnglishPortuguese
Speaker Assembly
1
Prepare left and right speakers for each side of the monitor.
(Note: Left and right speakers are not identical.)
2
Install the two retainers ( a, b ) at the two front-most holes on left and right side of the
monitor and then put a third retainer ( c ) in the rear-most hole on left and right side of
the monitor.
3
Verify proper speakers fit and then lock the speakers onto both sides of the monitor by
pushing down on the rear lever.
4
When disassembling, lift the lever up and take the speakers off the monitor.
a
bc
1. Monitor side view
2. Monitor
Speaker side view
3. Monitor side view
Your New Monitor

English 4
Connecting Your Monitor & Speakers
Caution : Turn the power off to the monitor, computer and speakers before connecting or
disconnecting the speakers.
1
Signal cable
Connect the end of the signal cable to
your computer’s video port. If you are
using a Macintosh computer, connect
the cable to a Macintosh adapter, and
set the pins on your adapter (adapter
not included). A PC-compatible
computer does not need an adapter.
2
Stereo input cable
Connect this cable to your sound card
or computer
3
DC input cable
Connect this cable to DC output port
on the back of your monitor.
4
Left output cable
Connect this cable to L- input port on
the back of the left side speaker.
5
L-input port
Connect the left output cable from
right speaker here.
6
Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
7
DC output port
Connect DC input cable here.
8
Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
9
Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
10
Install the monitor driver
•
Ins
ert the provided diskette into the
A drive.
•
Double click the “install.exe” file.
Your New Monitor

English 5
FrançaisEspañolDeutschItaliano EnglishPortuguese
Control Viewing Angle
Control the viewing angle to allow the user optimum viewing. (This monitor can tilt up and
down from 4 to 11 degrees.)
Control
1
Turn the stand feet underneath the monitor to control viewing angle.
Refer to the illustrations above.
2
Turn left to lower viewing angle and turn right to raise viewing angle.
Your New Monitor

English 6
Multimedia Speakers
Right Speaker
1
Power button
Push the power button to turn sound on/off for
the multimedia speakers.
2
BBS button
Push the BBS (Bass Boost Sound) button to
amplify a specific frequency band for audio. (The
BBS purpose is to amplify 6-8 dB at 100 Hz band.
Therefore, the amplification provided by the BBS
is dependant on input signal.)
3
Volume
Use this button to control the sound volume
when speakers are on.
4
Headphone port
To listen in privacy, connect headphones here.
5
Stereo input cable
6
DC input cable
7
Left output cable
Left Speaker
8
L - input port
Connect the left output cable from right speaker
here.
Your New Monitor

English 7
FrançaisEspañolDeutschItaliano EnglishPortuguese
Front Panel
1
EXIT ( ) button
Closes the on screen display. It is
also used to return to the previous
menu when using the on screen
display.
2
The / ( / ) buttons
These buttons allow you to select
and adjust items using the on screen
display. When adjusting an item
using the on screen display, the
button lowers the value of the
selected function. The button
raises the value of the selected
function. These buttons are also
direct access buttons for the
Contrast and Brightness feature
controls. (See the section below on
Direct Access Buttons.)
3
MENU ( ) button
Opens the on screen display. It is
also used to select a highlighted
function, open a sub-menu, or move
between menus when using the on
screen display.
4
Power button
The power button turns the monitor
on and off. The power indicator light
glows green during normal operation,
see page15.
1 3
4
2
Your New Monitor

English 8
Direct Access Buttons
Most of the adjustments you make to your monitor will be accessed through the on screen
display described in the next section. The Contrast and Brightness features can also be
accessed directly from the front of your monitor.
1
With the menu off, press the or button on the front of your monitor. The
button accesses the Brightness feature. The button accesses the Contrast feature.
2
Push the button to increase or the button to decrease the value of the
selection.
3
Press the EXIT button twice to exit the on screen display.
Your New Monitor

English 9
FrançaisEspañolDeutschItaliano EnglishPortuguese
Operation
On Screen Display (OSD)
Your monitor has an On Screen Display, accessed by the buttons on the front of your
monitor, that allows you to adjust characteristics of the screen image. Display changes are
indicated by on-screen adjustment icons. Some functions have sub-menus.
1
Push the menu button to display the main menu.
Function icons are arranged across the top of the on-screen display.
2
Push the or button to move through the icons.
The name of the function will appear below the rows of function icons.
3
To select a function or open a sub-menu, push the button. The screen will display
the options for adjustment. If there is a sub-menu, use the or button to
highlight the feature you want to adjust, then push the button to select it.
4
Use the and buttons to make adjustments. increases values and
decreases values. On-screen calibration numbers show the effect of your
adjustment. If you are in a sub-menu, use the EXIT button to return to the previous
menu.
5
Push the EXIT button to exit and save your changes
.
:
:
Function
selection and
Menu navigation
Function icons
Active function
Adjustment icons
Brightness
Access Function
Exit Menu

English 10
Operation
Icon Monitor Function Control
Brightness
Background brightness of screen.
– Decreases brightness
+ Increases brightness
Contrast
Contrast of screen image.
– Decreases contrast
+ Increases contrast
Horizontal Position
Horizontal screen position.
– Moves screen left
+ Moves screen right
Vertical Position
Vertical screen position.
– Moves screen down
+ Moves screen up
Horizontal Size
Horizontal screen size.
– Decreases size
+ Increases size
Vertical Size
Vertical screen size.
– Decreases size
+ Increases size
:
Brightness
Access Function
:
Contrast
Access Function
:
H-Position
Access Function
:
Access Function
V-Position
:
Access Function
H-Size
:
Access Function
V-Size

English 11
FrançaisEspañolDeutschItaliano EnglishPortuguese
Operation
Icon Monitor Function Control
Pincushion
Straightens screen vertical edges.
– Curves image inward
+ Curves image outward
Geometry
Trapezoid
Width of top and bottom of screen.
– Widens bottom of screen
+ Widens top of screen
Parallelogram
– Skews screen image left
+ Skews screen image right
Rotation
– Rotates entire screen left
+ Rotates entire screen right
Pinbalance
– Curves vertical lines to left
+ Curves vertical lines to right
V-Linearity
– Compresses image at top of screen
+ Compresses image at bottom of screen
1.
2.
:
Pincushion
Access Function
:
:
Geometry
Access Function
Exit Menu
+ - :
:
Trapezoid
Select Function
Previous Menu

English 12
Operation
Icon Monitor Function Control
Language
– and + scroll through on-screen
language options.
(English/ Deutsch/ Français/ Italiano
Português/ Español/ Svenska/ Russian/
Korean)
Advanced
H- Moiré
Corrects for on-screen moiré
pattern.
– and + clear Horizontal Moiré
V- Moiré
Corrects for on-screen moiré
pattern.
– and + clear Vertical Moiré
Video Input Level
Selects the video signal level
– Select 0.7 V
+ Select 1.0 V
Color Temperature
– 9300k more blue
+ 6500k more red
Halftone
– Off
+ On
1.
2.
:
:
1 2 3 4 5 6 7 8 9
Language
Access Function
Exit Menu
English
:
:
Advanced
Access Function
Exit Menu
+ - :
:
H-MoirŽ
Select Function
Previous Menu

English 13
FrançaisEspañolDeutschItaliano EnglishPortuguese
Operation
Icon Monitor Function Control
Zoom
– Reduces view of display area
+ Enlarges view of display area
Degauss
Removes color distortion caused by
magnetic fields. Do not use more than
once in 30 minutes.
Recall
Returns monitor to original settings.
– No
+Yes
Display Timing
Monitor display settings.
– Factory timing
+ User timing
OSD Lock/Unlock
Allows you to secure the current control
settings so that they cannot be
inadvertently changed. You can unlock
the OSD controls at any time by using
the same procedure.
n
Push and hold the Menu ( ) button
for 10 seconds or more to Lock or to
Unlock.
OSD Lock/Unlock
:
Zoom
Access Function
:
Degauss
Access Function
:
Recall
Access Function
:
Display Timing
User Mode
Control Lock
Locked

English 14
Troubleshooting
Before calling for service, check the information in this section to see if you can solve the
problem yourself. If you do need assistance, please call the phone number on the warranty
card, the phone number on the back cover of this manual, or contact your dealer.
Caution
This product may generate howling in monitor screen when the volume of speaker is turned
up. It is not a defect of this product, but a temporary phenomenon due to characteristics of
CDT. If your screen shows howing, try to turn down the volume. If this phenomenon is
continued even after you turn down the volume of your speaker, take out the speaker and
install it at a place far away from the monitor.
There is no screen image
n
Check to see that both the monitor and the computer are plugged in and turned on.
“No Connection, Check Signal Cable” appears
n
Check the signal cable connection between the computer and the monitor.
“Sync. Out of Range” appears
n
The input signal frequency is over or under the synchronization range of the monitor, see
“Specifications” on page 16.
The screen image is too light or too dark
n
Adjust the brightness or contrast settings, see page 10.
The screen image is too large or too small
n
Adjust the size settings, see H-size and V-Size on page 10.
n Adjust the Zoom setting, see page 13.
The colors are distorted with dark or shadowed areas
n
Activate the degauss feature, see page 13.
n
Adjust the color temperature, see page 12.
The power indicator light is blinking green
n
The monitor is using its power management system, see “PowerSaver” on page 15.
You need the monitor driver software
n
Download the driver from the internet at
http://www.samsung-monitor.com
http://www.samsungmonitor.com(USA only)

English 15
FrançaisEspañolDeutschItaliano EnglishPortuguese
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The monitor automatically returns to normal operation when you
move the computer's mouse or press a key on the keyboard. For energy conservation, turn
your monitor OFF when it is not needed, or when leaving it unattended for long periods.
The PowerSaver system operates with a VESA DPMS compliant video card installed in your
computer. Use a software utility installed on your computer to set up this feature.
NOTE: This monitor is EPA
E
NERGY
S
TAR
®
compliant and NUTEK compliant when used with a computer
equipped with VESA DPMS functionality.
Display Modes
State Normal Operation
Power Saving function mode EPA/NUTEK
Standby mode Suspend mode
Position A1 Power-off Mode Position A2
Power
Indicator Green Green, Blinking (0.5 sec. interval) Green, Blinking (0.5 sec. interval) Green, Blinking (1 sec. interval)
Power
Consumption 90 W (Maximum) 75 W (Nominal) 55 W (Nominal) Less than 15 W Less than 3 W
Display Mode Horizontal Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
(MHz)
Sync.
Polarity
(H/V)
IBM, VGA2, 720 x 400
IBM, VGA3, 640 x 480
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
31.469
31.469
37.500
43.269
46.875
53.674
60.023
68.677
70.087
59.940
75.000
85.008
75.000
85.061
75.029
84.997
28.322
25.175
31.500
36.000
49.500
56.250
78.750
94.500
–/+
–/–
–/–
–/–
+/+
+/+
+/+
+/+

English 16
Specifications
Specifications Model: SyncMaster 750DFT
Picture Tube • 17” (43 cm) Full square type [16” (40.6 cm) Viewable]
• Flat face, 90
° Deflection
• Dot pich: 0.20 mm (H) / 0.14 mm (V)
• Silica coated with anti-electrostatic properties
(TCO: Multilayer coating)
• Medium-short persistence phosphor
Synchronization • Horizontal: 30 kHz to 70 kHz
• Vertical: 50 Hz to 160 Hz
Display Color • Unlimited
Maximum Resolution • 1280 Dots x 1024 Lines
Active Display • Horizon tal: 12.3 ± 0.16 inch (312.0 ± 4 mm)
• Vertical: 9.2 ± 0.16 inch (234.0 ± 4 mm)
Input Signal,
Terminated
•
Analog: 0.7 Vpp positive at 75 ohms
•
Separate Sync.: TTL level, positive or negative
Maximum Pixel Clock • 110 MHz
Power Supply • AC 100-240 V ± 10%, 60 Hz / 50 Hz ± 3 Hz
Power Consumption • 90 W maximum
Dimensions/Weight
(WxDxH)
• Unit (Without Speakers): 16.53 x 16.81 x 15.86 inch / 37.5 lbs.
(420 x 427 x 403 mm / 17.0 kg)
(With Speakers): 20.19 x 16.81 x 15.86 inch / 39.7 lbs.
(513 x 427 x 403 mm / 18.0 kg)
• Carton (With Speakers): 20.19 x 22.51 x 20.86 inch / 46.3 lbs.
(513 x 572 x 530 mm / 21 kg)
Tilt • Min: 4
° • Max: 11 °
Environmental
Considerations
• Operating temperature: 32 ° F to 104 ° F (0 ° C to 40 ° C)
Humidity: 10% to 80%
• Storage temperature: -4
° F to 113 ° F (-20 ° C to 45 ° C)
Humidity: 5% to 95%
Design and specifications are subject to chang e without notice.
750DFT(E)2.fm Page 16 Tuesday, October 17, 2000 4:49 PM

Index
A
Access, 8
B
Brightness, 7, 10
C
Color temperature, 12
Connecting your monitor & Speakers, 4
Contrast, 7, 10
D
Degauss, 13
Dimension, 16
Display modes, 15
Display timing, 13
Driver software, 14
F
Frequency, 15
Front panel, 7
G
Geometry, 11
H
Halftone, 12
H- Moiré, 12
Horizontal position, 10
Horizontal size, 10
Humidity, 16
I
Install, 4
L
Language, 12
M
Menu, 7
Monitor function control, 10, 11, 12,13
O
Operation, 9, 10, 11, 12, 13
On Screen Display, 9
OSD Lock/Unlock, 13
P
Parallelogram, 11
Pinbalance, 11
Pincushion, 11
Picture tube, 16
Power button , 7
Power consumption, 15, 16
Power cord, 4
Power port, 4
Power Saver, 15
R
Recall, 13
Resolution, 16
Rotation, 11
S
Speaker, 3, 6
Specification, 16
Synchronization, 16
T
Temperature, 16
Tilt, 5, 16
Trapezoid, 11
Troubleshooting, 14
V
Vertical position, 10
Vertical size, 10
Video input level, 12
Viewing angle, 5
V-linearity, 11
V- Moiré, 12
W
Weight, 16
Z
Zoom, 13
English 17

Regulatory Information
FCC Information
User Instructions
The Federal Communications Commission Radio
Frequency Interference Statement includes the
following warning:
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television receptions, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and
receiver.
n Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
n Consult the dealer or an experienced radio/TV tech-
nician for help.
User Information
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
If necessary, consult your dealer or an experienced
radio/television technician for additional suggestions.
You may find the booklet called How to Identify and
Resolve Radio/TV Interference Problems helpful. This
booklet was prepared by the Federal Communications
Commission. It is available from the U.S. Government
Printing Office, Washington, DC 20402, Stock Number
004-000-00345-4.
Warning
User must use shielded signal interface cables to
maintain FCC compliance for the product.
Declaration of conformity for products
Marked with FCC Logo
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
85 West Tasman Drive
San Jose, CA 95134 USA
Tel) 408-544-5124
Fax) 408-544-5191
Provided with this monitor is a detachable power
supply cord with IEC320 style terminations. It may be
suitable for connection to any UL Listed personal
computer with similar configuration. Before making the
connection, make sure the voltage rating of the
computer convenience outlet is the same as the
monitor and that the ampere rating of the computer
convenience outlet is equal to or exceeds the monitor
voltage rating.
For 120 Volt applications, use only UL Listed detachable
power cord with NEMA configuration 5-15P type
(parallel blades) plug cap. For 240 Volt applications use
only UL Listed Detachable power supply cord with
NEMA configuration 6-15P type (tandem blades) plug
cap.
IC Compliance Notice
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations of ICES-003.
Cet appareil Numérique de classe B respecte toutes les
exigences du Règlemont ICES-003 sur les équipements
produisant des interférences au Canada.
MPR II Compliance
This monitor complies with SWEDAC(MPR II)
recommendations for reduced electric and magnetic
fields.
European Notice
Products with the CE Marking comply with both the
EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC)
and the Low Voltage Directive (73/23/EEC) issued by
the Commission of the European Community.
Compliance with these directives implies conformity to
the following European Norms:
n
EN55022:1998 – Radio Frequency Interference
n
EN55024:1998 – Electromagnetic Immunity
n EN61000-3-2:1995 + A1 + A2 – Power Line Harmonics
n EN61000-3-3:1995 – Voltage Fluctuations
n
EN60950 – Product Safety.