Samsung YP-60H User manual

YP-60 Sports Function
Quick Guide
AH68-01486B (Rev 1.0)
<Measuring Calories Consumed >
●Measure your heart rate before and after exercise to find out the
calories consumed.
1. Press the button to turn on the power.
2. Before starting exercise, press the Sports Function button
on the right side.
3. In SPORTS FUNCTION screen, use the , button to move to
the CALORIE COUNTER and then press the button.
4. When the following screen appears, put your finger on the sensor on the top of
the device as shown in the figure and press the button.
●Heart rate is measured for about 10 seconds.
8. If you want to save the data, select CREATE.
●Measured data will be saved.
5. When this first measurement finishes,
measured heart rate will be automatically
saved and " " appears in the screen.
6. Start exercise.
7. When you finish exercise, press the Sports Function button on the
right side and measure the heart rate once more as shown in steps No. 3~4.
●Following screen will appear.
●The unit of calories is kcal(kilo calorie).
S76 E95
: 50
NN
NNoo oott ttee ee
●Since the results of measurement data are statistical values, they may slightly
differ from the actual results.
●If you measure the calories without exercise, the calories consumed indicates
basal metabolic rate.
NN
NNoo oott ttii iicc ccee ee
●To obtain an accurate reading, be sure to measure your heart rate within 30
seconds after exercise.
- 4 - - 5 -
CALORIE COUNTER
USER
1st Check
START
CALORIE
Try It
SPORTS FUNCTION
EXIT
CALORIE COUNTER
HEART RATE
CALORIE COUNTER
Place your finger
on sensor and
press button
CALORIE COUNTER
Measuring 95bpm
002
Hit Song
Nor
01:36
NOR
P
M
00:00:14
Heart rate before exercise Heart rate
after exercise
Calories consumed by
exercise

1. Press the button to turn on the power.
2. Press the Sports Function button on the right side.
3. In SPORTS FUNCTION screen, use the , button to move to
HEART RATE and then press the button.
4. When the following screen appears, put your finger on the sensor on the
top of the device as shown in the figure and press the button.
●Heart rate is measured for about 10 seconds.
●When abnormal measurement graph appears, measure the heart rate again
from the beginning.
●When the measurement is complete, the heart rate measured will appear.
●Normal heart rate is 60~80bpm.
❉Cautions when measuring heart rate
- Do not press the sensor too hard when you place your finger on the sensor
- Do not move your finger during measurement.
- Do not measure while you move.
- Do not measure while your finger is dirty or oily.
- Do not expose directly to the sun when you measure.
- Display during measurement -
Measuring Heart Rate <Setting the User>
1. Press the button to turn on the power.
2. Press the Sport Function Select button on the lower right part.
3. In SPORTS FUNCTION screen, use the , button to move to
HEART RATE and then press the button.
❉Set the user first before
measuring the calories consumed.
4. In PROFILE screen, select TRY IT and then enter your
age, sex, height and weight.
●, : Move to the next setting.
●, : Change the setting value.
5. When setting is complete, move to
CREATE and then press the button.
●Setting will be saved..
Measuring Calories Consumed
- 1 - - 2 - - 3 -
SPORTS FUNCTION
CALORIE COUNTER
HEART RATE
PROFILE
HEART RATE
USER
Try It
SPORTS FUNCTION
EXIT
CALORIE COUNTER
HEART RATE
SPORTS FUNCTION
HEART RATE
PROFILE
DATA BASE
EDIT PROFILE
HEIGHT : 1m71
CREATE CANCEL
WEIGHT : 060kg
SPORTS FUNCTION
EXIT
CALORIE COUNTER
HEART RATE
EDIT PROFILE
NAME : GUEST
GENDER : MALE
AGE : 23
PROFILE
EXIT
TRY IT
HEART RATE
Place your finger
on sensor and
press button
HEART RATE
Measuring 76bpm HEART RATE Measuring 76bpm
Normal measurement Abnormal measurement