Samsung YP-ST5V User manual

Location of Controls
1
YP-ST5 Quick Guide
Recording Button Play/Pause Button
Hold Switch
Loop Repeating Button
USB Cable
Connection Port
ENC Jack
Neck strap Hook
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button
Display
Earphone Jack
Battery Cover
Microphone
Turning Power On and Off Playing Music
Pausing Music
●Power On : Press the button to turn on the power.
●Power Off : Press and hold the button to turn off the power. Press the button.
●Playback starts.
Press the button to pause playback.
●If no buttons are pressed within 10 seconds(changes depending on settings),
the yepp automatically powers off.
●While in Pause mode, briefly press again to resume playback.
Disconnecting the USB cable
After completing the file transmission, you must disconnect the cable in the following way:
4AH68-01618B (Rev 0.0)
N
No ot te e : :
● The green arrow is not displayed on the Task Bar in Windows 98.
If a “READY” message is shown in Display window, disconnect the USB cable.
1Double-click on the green arrow in the taskbar
on the bottom right of the window.
2When the [Stop a Hardware device] message appears,
press the [OK] button and disconnect the USB cable.
k

Downloading/Uploading files
3
1
2
N
No ot ti ic ce e : :
● The “WRITING/READING” message will appear during file download or upload.
Disconnecting the USB cable while “WRITING/READING” is displayed may cause
malfunction of the unit.
● Files willl not necessarily play back in the order displayed in the Removable Disc in
Windows Explorer.
Connect the player to your PC.
Open Windows Explorer on PC.
●Removable Disc is displayed in Windows Explorer.
3Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
Connecting the USB cable
➤Before connecting the yepp to PC, make sure to install USB driver.
Insert the Installation CD into the CD-ROM drive and then click [Install yepp USB Driver].
Complete the installation by the instructions in the order as they appear in the windows.
2
Connect a USB cable to the USB port on the
computer.
Connect the other end of a USB cable to the USB
cable connection port on the bottom of the player.
●If you disconnect the USB cable from your PC while
implementing a command or initializing during USB
driver installation, your PC may not function correctly.
2
Upon installation of the USB driver
"Samsung yepp YP-ST5 USB Device" will appear
in the [System Properties] ➝[Device Manager].
4
1
The USB driver is installed with a message
saying that it is searching for a new device. You
may not see the display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
3
USB connect cable