Samsung SRM-872 Installation guide

1
NETWORK VIDEO RECORDER
QUICK MANUAL
SRM-872

2
Cautions before Startup system
1. This system must be installed inside of vehicle.
2. Power supply should be connected to vehicle battery directly.
3. To extend power cord, use AWG(American Wire Gauge) 18 or thicker.
4. All installed cable should be fixed.
5. The guaranteed operating temperature range of this product is -25°C ~ 50°C (-13°F ~ 122°F).
6. The built-in HDD in the product, its guaranteed temperature range is 0°C ~ 60°C (32°F ~
140°F) and this may not properly work in low temperature. Mind keeping temperature of
system Use industrial use ‘Micro SD’(not included).
7. Set password for your wireless network if you use the product with a wireless router. Being
not protected with password or using the default wireless router password may expose your
video data to potential threat.
Package Contents
The following components are included in product box
NVR Main unit IO BOX Control Box
Power cable(1ea) RS232 connect cable(2ea) RJ45 UTP cable (2ea)
GPS Antenna Remote Control & Battery CD (User manual)
Quick Guide HDDfixscrewandKey Rear cover
Part color and design may differ due to the manufacture

3
Product Installation
Place GPS Antenna evenly out of vehicle toward the sky. If antenna installation is wrong, it
receives unstable data
VCC/ACC input range is 12Vdc ~ 24Vdc.
VCC power pin should be connected to battery on vehicle and connect ACC power pin to
accessory power on vehicle
ACC. Power means the power on when turn key at ‘ACC’ mode

4
Log in
1. Connect power on system.
2. System displays initial screen and start initializing.
3. It shows login screen.
4. To log in, select ‘admin’ and press ‘OK’. No password is configured at initial time.
*if there’s configured password, click password field and use virtual keyboard.(see picture)
5. System logs in as ‘Administrator’.
Note : password can be set up to 8 numbers with combination of number 0 to 9. Special
character (& # < > ` ~) are not allowed. To enter new password, go to ‘Menu->System->User’
page.
Shutdown system
1. Press ‘Menu’ and select ‘Shutdown’ system
Note:Only allowed user can shut down system.
Single Channel Live view
Enlarge selected channel as single full screen.
1. Move mouse to desired channel and double click left mouse button and enlarge selected
channel.
2. Double click again back to previous mode.
Move to Search mode
1. Click ‘Playback’ button on remote controller
2. Or Click Right mouse button on live mode and open contextual menu.
3. Select ‘Playback’ mode.

5
Emergency Recording
Record immediately on live mode
1. Press ‘Emergency Rec’ button on control box. It turns red.
2. Or use contextual menu (click right mouse button) and select ‘Emergency Rec’.
Playback control
R.Play: Reverse Playback (1x->2x->..64x -> 1x)
Step Backward: Go to the previous image
Pause: Freeze or Stop current image
Step Forward: Go to the next image
Play: Play the data at normal speed (1x->2x->..64x -> 1x)
Enter Setup menu
1. Click ‘Menu’ button on remote controller
2. Or Click ‘Menu’ button and enter setup mode
3. Or use contextual menu and select ‘Setup Menu’.
Backup
1. Click ‘Backup’ button on remote controller
2. Or Click right mouse button and open contextual menu.
3. Select ‘Backup’ on menu and set storage and duration to archive
4. Press ‘start’ to backup.

6
IP camera setup
Enter IP camera information and authorize it to check its working status.
1. Press ‘Settings’ on camera menu.
2. Enter IP, ports and ID/Password of desired IP camera.
3. Check ‘Authentication’ and press ‘Connect’ to check IP camera connection status.
4. Once ‘Log in’ success message means it connects normally.
If it fails, check information again.
5. Press ‘OK’ to save information.
Recording Setup
1. Press Menu and move to ‘Record->Record’.
2. Check ‘Overwrite’ option. *If not selected, system *Configured option will be applied to
whole channels.
Time Record is continuous recording
Event record is record only when event triggered.
Emergency Record: Activated by Emergency Rec. signal from outside
3. Press ‘Ok’ to save changes.
PROFILE SETUP
Network camera generally provides single or multiple profiles and user can select details such as
live, recording and network transmit profiles.
System shares added profiles. Once you edit profile on live, record or Network, it updates other
profiles.
Live Profile : ‘Menu->Device->Camera->Live profile’
Record Profile : ‘Menu->Recording->Recording->Record profile’
Network Profile : ‘Menu->Network->Transmission->Network profile’
Add profiles
1. Select one of profiles from Live, Recording and Network and move to that menu.
2. Press ‘Edit’ button on right and it shows current profile details.
3. To add new profile, press ‘+’ button below and set profile name, codec, resolution, fps and
Kbps information.
May differ available profiles by camera
4. Press ‘OK’ to save changes.

58
Appendix
System Specification
Video
SRM-872
N/W Camera Inputs Up to 8CH
Resolution CIF, VGA, 4CIF, 1.3M, 2M, 3M
Protocols ONVIF
Installation Camera Setup Resolution, Frame rate, bit rate setup.
Viewer Built-in Webviewer
Multi Screen
Monitor display 1/4/9
Performance
OS Embedded Linux
Recording Compression H.264, MJPEG
Rec. bit rate 64Mbps
Record Rate Up to 240fps @1280 x 720 (1.3M)
Record Mode Emergency, Schedule (Time/Event)
Overwrite modes
Continuous, Auto Deletion w/ Retention duration
Pre-alarm Up to 30 sec.
Post-Alarm Up to 6 hour.
Event Source Sensor, MD, V-Loss, G-Sensor, IP camera event
Network
Ethernet Gigabit Ethernet x 1, FE x8 w/PSE
Transmission
speed Up to 1Gbps.
Max. Remote
users Live (10)/ Search(3)/ Setup (1)
Protocol support TCP/IP, DHCP, SMTP, NTP, HTTP, DDNS, RTP, RTSP
Monitoring CMS, Webviewer, Smart-phone Viewer.
Connection Mode
Static/DHCP
Storage Internal HDD 1 HDD(2.5”) or 1 SSD
Removable Micro SD(Industrial, Max 32GB)
Backup USB 2 USB Ports (use 2 ports below)
File Format STRG(NVR Player), EXE(Include Player), AVI
Search
Backup Viewer Search Playback on Google Map
Function 8ch Search/Playback, GPS information, G-Sensor
Interface
Video Inputs 8 RJ-45 (PoE Support)
Output 1 HDMI, 1 VGA, Up to 1080p
Audio
Inputs Network Camera audio input, up to 8CH
Compression G.711, G.726
Ext. Audio Output
1 Phone Jack (main unit), 1 RCA Connector(Control BOX)
Alarm Inputs Terminal 8 inputs, NO/NC
Outputs Terminal 8 outputs, NO/NC
Others Ethernet 1 RJ45 (10/100/1000 Base-T Ethernet)
USB 3 USB(2.0 High Speed)
GPS 1 SMA
Functions

59
Power
Management Shutdown Delay 1 Min. ~ 30 Min. (User selectable)
General
Electrical Input Voltage 12V ~ 24V DC
Power
consumption Max. 30 W
Camera Power
Output Max. 8 W per channel, Total 64W(PoE, IEEE 802.3af )
Environmental
Operating
Temp./Humidity -25°C to +50°C (-13°F to +122°F) / 20% to 85% RH
Mechanical Dimension
(W x H x D)
ㆍSYSTEM : 225.5(W)x 59(H) x 312.2(D) mm
ㆍI/O Box : 155(W) X 44(H) X 70(D) mm
ㆍControl Box : 121(W) X 32(H) X 75(D) mm
Weight
(With Out HDD)
ㆍSYSTEM : 2.17 Kg
ㆍI/O Box : 0.35Kg
ㆍControl Box : 0.18Kg
Approvals EMC/Safety CE, FCC, cUL, e-Mark, KCC, EN50155
Shock, Vibration MIL STD-810F method 514.5, EN61373

7

8
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsung techwin R&D Center, 701,Sampyeong-dong, Bundang-gu,Seongnam-si,Gyeonggi-do, Korea, 463-400
TEL : [phone]~60 FAX : [phone]
SAMSUNG TECHWIN AMERICA Inc .
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : [phone] Direct : [phone]
Fax : [phone]
www.samsungcctvusa.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : [phone] FAX : [phone]
www.samsungtechwin.com
www.samsungsecurity.com
www.samsungipolis.com