Samsung SRM-872 User manual

1
NETWORK VIDEO RECORDER
User Manual
SRM-872

2
Network Video Recorder
User Manual
Copyright
ⓒ2013 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no
formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the
user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without
prior notice.
 Design and specifications are subject to change without prior notice.
 The initial administrator ID is “admin” and the password should be set when logging in for the first time.
Set password for your wireless network if you use the product with a wireless router. Being not protected with
password or using the default wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect personal information and to prevent the
damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging
a password

3
Overview
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/ apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
STANDARD APPROVALS
This equipment has been tested and found to comply with FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense..

4
BEFORE START
This manual provides operational information necessary for using the product and contains a description about
each component part and its function as well as menu or network settings.
You have to keep in mind the following notices :
• SAMSUNG retains the copyright on this manual.
• This manual cannot be copied without SAMSUNG's prior written approval.
• We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
• Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be
removed from the unit.
• Before adding a hard disk drive or external storage (USB memory, USB HDD, etc), check if it is compliant with
this product. For the compatibility list, contact the retailer.
• Use industrial use ‘Micro SD’(not included). It saves data on SD in lower temperature and changes to HDD
when HDD reaches operational temperature.
• Place GPS Antenna evenly out of vehicle toward sky. If antenna installation is wrong, it receives unstable data.
Normal GPS error distance is 16m in stop, 30m in moving.
WARNING
Caution
• Power off before installation to extend power cord, use AWG(American Wire Gauge) 18 or thicker.
• When Install GPS antenna, attach it on flat place outside of vehicle with accessories. GPS antenna must head
to the air. Wrong installation causes unstable data receiving. GPS error range is 16m when stops, 30m when
moving. When install GPS antenna in the vehicle, purchase and use ‘Active Antenna(2.85V)’.
• Must use vehicle use batteries. Fuse may be broken when you connect to ‘always on’ power supply.
• Battery lifecycle can be shorten if battery status not good. Use good status batteries.
• Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the
Instructions.
System Shutdown
Turning off the power while the product is in operation, or undertaking improper actions may cause damage or
malfunction to the hard drive or the product.
To safely cut off power, unplug the power cable.
You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected
power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

5
Operating Temperature
The guaranteed operating temperature range of this product is -25°C ~ 50°C (-13°F ~ 122°F).
This product may not work properly if you run right after a long period of storage at a temperature below the
guaranteed one.
Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at
room temperature for a period.
Especially for the built-in HDD in the product, its guaranteed temperature range is 0°C ~ 60°C (32°F ~ 140°F).
Likewise, the hard drive may not work at a temperature below the guaranteed one.
Ethernet Port
This equipment is indoor use and all the communication wirings are limited to inside of the building.
Security Precautions
The initial administrator ID is “admin” and the password should be set when logging in for the first time. Set
password for your wireless network if you use the product with a wireless router. Being not protected with
password or using the default wireless router password may expose your video data to potential threat. Please
change your password every three months to safely protect personal information and to prevent the
damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by
Mis-managing a password.

6
Contents
p3 Overview
8 Product Features
9 Package Contents
10 Front & rear view and details
12 IO Box
13 Control Box
p14 Installation
14 Disassemble Brackets
14 Mount product
15 Install IO & Control box
16 Vehicle installation
p17 Surveillance
Start / END system
17 Log in
17 Shutdown system
18 Live monitoring screen
19 OSD icons
19 Contextual Menu on Live
20 Live screen division
20 Single Channel Live view
20 Backup
21 Live Monitoring
21 Recording Status
21 Emergency Recording
21 Move to Search mode
21 Enter Setup Menu
p22 System Setup
22 System Information
25 User Setup
27 Device
29 Profile SETUP
30 Audio
31 Alarm
32 Display
34 Record Setup
36 Network
40 Event

7
p42 Playback(Search)
p44 Backup
p45 Web Client Access
p47 Smartviewer Auto v1.0
52 Smartviewer AUTO v1.0 Setup
p55 Callback
p56 Mobile viewer iPolisAuto
p58 Appendix
58 System Specification
60 Default Configurations
62 IO BOX Installation
63 Connector Pin Map
66 FAQ

8
Product Features
• Provide Ultimate reliability with embedded linux System
• Dedicated Database structure for more stability.
• CMS(Central Monitoring System) support
• Use same UI on NVR, CMS and web viewer.
• Web monitoring, Searching and setup available.
• Built in Media Player for backup playback
• USB support for Mouse and external storage.
• HDD/SSD and Micro SD support
• Mobile device support (IPhone and Android)
• Digital zoom
• Compact size for vehicle installation
• Backup storage support such as USB memory stick
• Built in GPS – E-Map support
• Industrial standard in Enduring Temperature limit
• Built in power support (PoE).
• Apply military product level test in vibration and shock test.
• I/O Box (Sensor, Alarm, G-Sensor, Status LED)
• Event detection through G-sensor in I/O Box
• Control Box (IR input, Emergency Button, Status LED, Audio-Out)

9
Package Contents
The following components are included in product box
NVR Main unit IO BOX Control Box
Power cable(1ea) RS232 connect cable(2ea) RJ45 UTP cable (2ea)
GPS Antenna Remote Control & Battery CD (User manual)
Quick Guide HDD fix screw and Key Rear cover
 Part color and design may differ due to the manufacture

10
Front & rear view and details
Front
Name Description
1 WiFi / 3G USB Connect USB module when use WiFi or 3G
communication(optional)
2 USB port Use for mouse connection or external storage.
3 Audio output Sound output as line output
4 Video output Connect VGA monitor to view display
5 HDMI output Connect HDMI monitor
6 RESET switch Use when restart system
7 Micro SD Slot Insert Micro SD for recording
8 IR sensor Receives signals from remote controller
9 LED Display NVR status
10
Lock Key Lock HDD device. This must be locked to start system.
①
②③④⑤⑥⑦ ⑧ ⑨
⑩

11
Rear
Name Description
1
Poe Camera Connect IP cameras. System supports power over Ethernet when
use PoE IP camera
2
NETWORK Connect network cable for CMS and Web view
3
CONTROL BOX Connect to control box
4
IO BOX 1 Connect to IO box
5
PWR Connect power supply from vehicle
6
GPS Connect GPS Antenna (SMA type)
①
②
③ ④
⑤
⑥

12
IO Box
Front
*For more details, see page 62 ‘IO BOX Installation’.
Rear
name
Description
1
LED Display Display following status.
-Link : Shows connection status of IO BOX
2
Dip Switch Set moving direction of vehicle.
name
Description
1
GND Ground connection. Connect to vehicle body
2
IO BOX 1 Connect to main unit’s port.
3
ALARM Connect to speed pulse of the vehicle. This port can be used for
RS232/485.
4
SENSOR Connect Alarm output to External devices. Additional power
required. (Open-collector type)
①
②
①
③
④
②

13
CONTROL BOX
Front
Rear
name
Description
1
Emergency Start Emergency Recording with this button.
2
LED lights
POWER
Display power on status of control box
Light on when storage(HDD, SD) storage is available
Light on when storage (HDD, SD) is not available.
Light on GPS position fixed after receiving data
Light on when ‘Shutdown delay’ is processing.
Light on when alarm output is working
3
IR receiving ports Receives IR signals from remote controller
name
Description
1
Audio out Audio Line out
2
Control box Connect to main unit’s control port
①
②
③
①
②

14
Installation
Disassemble Brackets
1. Open box and take out product.
Then separate bottom bracket
with screw(1) in picture.
2. Place ‘bottom bracket’ on even
place and assemble main unit
and bracket with screw(2) in
picture.
3. Assemble rear cover and main
unit with screw(3) in picture.
The cables must be passed
through rear cover hole as
following picture.
4. Tied up installed cables firmly.
Mount product
Use 6 screws as following picture and mount brackets on installation place.
(ST : 15kgf ~)
 ST = screw tightening power
 Tighten screw with recommended torque

15
Install IO & Control box
* Connect IO box and Control box with provided cable as above picture.
 ST = screw tightening power
 Tighten screw with recommended torque

16
Vehicle Installations
When install on the bottom, fix the brackets on main unit to the bracket which installed on bottom
with 6 screws.
Caution: When installed on bottom, it may cause HDD shock issues. For the torque of screws, see
the pictures on previous page. * ST = torque of screws.
Each tool has differ torque, you should follow guided torque when installation.

17
Surveillance
Start/End system
Before install on vehicle, user should set system first. Connect VGA or HDMI monitor If monitor
doesn’t display because of resolution, press and hold ‘zoom’ key on remote controller for 5seconds. It
adjust system resolution automatically.
Log in
1. Connect power on system.
2. System displays initial screen and start initializing.
3. It shows login screen.
4. To log in, select ‘admin’ and press ‘OK’. No password is
configured at initial time.
*if there’s configured password, click password field and
use virtual keyboard.(see picture)
5. System logs in as ‘Administrator’.
Note : password can be set up to 8 numbers with combination of
number 0 to 9. Special character (& # < > ` ~) are not allowed. To
enter new password, go to ‘Menu->System->User’ page.
Shutdown system
1. Press ‘Menu’ and select ‘Shutdown’ system
Only allowed user can shut down system.

18
Live Monitoring screen
Monitoring system with VGA or HDMI output on control box after installation on Vehicle.
Name Description
1
Menu Open NVR menu.
2
HDD status Display HDD used status with percentage.
3
Status
Icons
Turn on when archiving data
Turn on when sequencing mode works
Turned on when HDD is set as overwrite mode
Turned on system receiving GPS data
Turned on network connected
Turned on when alarm is activating
Turned on with G-Sensor detects events
Turned on Emergency Recording is on.
4
Time & date info. Display time & date information
5
Remote controller
Turned on when IR remote controller is activating. Remote
controller can control system regardless of system id If system ID
is set ‘0’,
①
②
③
④
⑤

19
OSD Icons
Following status icons displayed on each channels.
 Displays when it’s over than following recorded size and it shows 1fps speed. (4
division 1280x720 60fps, 9 division : 1280x720 30fps)
Contextual Menu on Live
Press right mouse button to see Contextual menu. Frequently used features are in this menu box.
Right click mouse button on live screen
name
Description
name
Description
No Recording(greed) Pre Event Rec.(blue)
Recording (Red)
Motion Detection
Emergency Recording
Sensor Detection
Event Recording (red)
IP Camera event
Detection
High Resolution
Playback*
name
Description
1 Camera Select camera and display
2 Layout Select screen mode.
3 Live Monitoring Display IP camera images
4 Record Monitoring Display real time recording status
5 OSD OSD display options.
6 Sequence Sequence live channels
7 Zoom Run Digital zoom. Only available on single channel mode.
8 PIP Run PIP feature. Only available on single channel mode
9 Freeze Freeze current screen.

20
* The Audio sound output in live mode is based on the channel configuration in ‘Menu-Audio’. It
has not same as current selected channel.
Live Screen division
Display live screen as 9 division (3x3), 4division (2x2), and single screen mode.
3x3 (9 Division) 2x2 (4 Division) Single screen mode
To change layout, click right mouse button on live mode and select
camera or ‘Lay out’ menu.
Single Channel Live view
Enlarge selected channel as single full screen.
1. Move mouse to desired channel and double click left mouse button and it display single
channel view of selected channel
2. Press desired channel number on remote controller and it display single channel view of
selected channel
3. Click right mouse button on live view and select ‘Camera’ then select desired channel.
4. Double click again back to previous mode.
Backup
1. Click ‘backup’ button on remote controller
2. Click right mouse button and open contextual menu.
3. Select ‘Backup’ on menu and set storage and duration to archive
4. Press ‘start’ to backup.
10
Audio Select audio channel
11
Backup Playback recorded data
12
Playback Move to search playback mode.
13
Emergency Rec. Start emergency recording.
14
Log Display current system log
15
Setup Open setup menu