Samsung SCC-ZM395 User manual

Version 1.1
- 1 -
www.samsungsecurity.com
Color Camera Module
SPECIFICATIONS
MODEL SCC-ZM395
DATE Nov. 01. 2009
CUSTOMER
APPROVED
SUPPLIER CUSTOMER
SAMSUNG ELECTRONICS Co., Ltd.
VSS Business Team
416, Maetan-3dong, Yeongtong-gu, Suwon-City, Gyeonggi-do, 443-742, Korea
Tel : [phone], 3381, 3980, 3676

Version 1.1
- 2 -
Table of Contents
-Revision History
1. Features --------------------------------------------- 4
2. Precautions ---------------------------------------- 5
3. Specifications
Camera Module Spec. -------------------------------- 6
Spectral Response Spec. ----------------------------- 7
Hardware Spec. ------------------------------------------ 8
Interface Circuit ------------------------------------------ 9
Reliability Zoom Lens ---------------------------------- 10
Dimension -------------------------------------------------- 11
Packing Spec. -------------------------------------------- 12
4. Function
OSD Menu Structure ----------------------------------- 13
Function (OSD) ------------------------------------------- 14
5. Communication ----------------------------------- 24

Version 1.1
- 3 -
-Revision History
Date Version Description
'09. 09. 13
'09. 10. 01
'09. 11. 01
0.1
1.0
1.1
Establishment (for R&D sample)
Mass Production
Protocol changed and fixed

Version 1.1
- 4 -
1. Features
■1/4" 410K/470K Sony Ex-View-HAD Double Scan CCD
PowerZoomOptical39x (3.4~132.6mm), Digital 12x(0.1step)
Minimum illumination 1.2 Lux (F1.6/WIDE, 50 IRE, Color, Sens-Up Off)
S/N Ratio 52 dB
■High Resolution :more than 560(Color)/600(BW) TV Lines
This camera has realized high resolution of 560(Color)/600(BW) TV lines using the top-notch
full digital image processing, 12 Bit A/D serial signal processing and special algorithm
technologies.
■WDR (Wide Dynamic Range)
WDR extends the contrast range as it takes apicture of each of dark and bright areas
before compositing the two, which is useful if you take apicture of windows inside abuilding.
Namely, it improves the picture quality of the outdoor scenery as well as indoor.
The contrast enhancer sustains the effective contrast range and expands Dynamic Range up
to 128x[NTSC] and 160x[PAL]
■DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating adistinct and clear image.
This camera DNR function utilizes both an adaptive 2D filter reducing noise in the brightness
of the image and an adaptive 3D Filter reducing noise caused by movement.
■DAYNIGHT (with DAYNIGHT Filter Assy)
This camera has the DayNight function which outputs the filter changing signal with
detecting the illumination condition.
DayNight operation feature an ‘auto’mode which switches between day and night mode
automatically based upon the level of illumination on the scene.
And also, the COLOR mode operates in daytime conditions to provide optimum colors,
and B/W mode operates in night-time conditions to enhance the definition of the image.
■CCVC (Camera Control Via Coaxial cable)
This is aremote control function that overlaps the coaxial cable (for atransfer of the video
signal) with the control signal. In installation or repair, this helps you control the
communication controller (optional) without additional cabling. ※Coaxial Controller (Option)
■Intelligent Video (Moved/Fixed)
This Camera provides built-in capability for video content analysis. Operational modes include
fixed mode (appear the object) and moved mode (disappear the object).

Version 1.1
- 5 -
2. Precautions
■Avoid aiming the camera directly towards extremely bright objects such as sun,
as this may damage the CCD image sensor.
■Do not use the camera in the extreme environments.
-Extremely hot or cold place such as radiators, heat registers
(Operating condition -10℃~+50
℃,under 90% humidity)
-Close to generators of powerful electromagnetic radiation.
-The place which is subject to light reflections, unstable lighting conditions,
strong vibration.
■Remove dust or dirt on the surface of the CCD with ablower.
■Do not apply excessive voltage. (Operating Power Input :DC 9V ~ 15V)
■The following phenomena that may appear in images are specific to CCD.
They do not indicate malfunctions.
-White Flecks :The fleck especially tend to be seen when operation at ahigh
environmental temp. or when you have raised the master gain and
use in sense-up function.
-Vertical Smear :When an extremely bright object, such as astrong spotlight or
flashlight, is being shot, vertical tails may be produced on the screen,
or the image may be distorted.
-Alias :When fine patterns, stripes, or lines are shot, they may appear or flicker.
■Do not drop objects on the product or apply strong blows to it.
■Do not install the unit in humid, dusty, or sooty locations.
Doingsomaycausefireorelectricshock.

Version 1.1
- 6 -
3. Specifications
3-1. CAMERA Module Spec.
Items Sub-items SCC-ZM395N SCC-ZM395P
CCD Device SONY 1/4" ExView-HAD
PS CCD (ICX-448) SONY 1/4" ExView-HAD PS CCD (ICX-449)
Total 811 x 508 795 x 596
Effective 768 x 494 752 x 582
Sync. Inter. H/V 15,734/59.94Hz 15,625/50Hz
LL H/V 15,750/60Hz 15,625/50Hz
Performance
Horizontal/Verical Resolution more than 560(Color)/600(BW) TV Lines
Minimum illumination
(F1.6/Wide)
Color mode 50 IRE 25 IRE 15 IRE
Sens Off 1.2 Lux 0.6 Lux 0.36 Lux
Sens x256 0.004 Lux 0.002 Lux 0.001 Lux
BW mode 50 IRE 25 IRE 15 IRE
Sens Off 0.12 Lux 0.06 Lux 0.036 Lux
Sens x256 0.0004 Lux 0.0002 Lux 0.0001 Lux
S/N Ratio 52dB
Lens
focal length, Fnumber f=3.4~132.6mm, F1.6(Wide)/F3.7(Tele)
Drive Type Auto (DC)
M.O.D. Wide: 0.2m , Tele: 0.8 m
View Angle Tele: 1.56˚(H) x1.16
˚(V), Wide: 57.54˚(H) x 44.44˚(V)
Functions
OSD E/F/S/J/P, (E/K) E/F/G/S/I, (E/R/Po/T/Cz),
(Chinese)
Privacy Zone 12ea (Square)
Day&Night COLOR/BW/AUTO (with D/N Filter Assy)
Motion Detection Off/On(1ea) ※Mask Area 4ea
D-Zoom x1~x12 (x0.1STEP)
High Speed Shutter 1/60(1/50) ~ 1/10Ksec
Flickerless Off/On
Sens Up (Low Shutter) x2 ~x256
BLC Off/On (Area Setting)
AGC Off/On (Max.Level Setting)
ALC (Auto Level Control) Auto(DC)/Manual(Level Control)
Line Lock Off/On (Phase Control)
Camera ID Off/On (Max. 54ea/2Line)
White Balance ATW1/ATW2/AWC/MANUAL
(ATW1: 2,500 ~ 9,500°K, ATW2: 2,000~10,000°K)
DNR Off/On (Adaptive 3D+2D)
DIS Off/On
PRESET Off/On (256ea)
WDR Off/On (x128/NTSC, x160/PAL)
Intelligent Video Yes (Moved/Fixed)
Etc. Function Detail, Reverse(H/V), Posi/Nega, PIP
In/Output Alarm Output 1ea(Open Collector) Remote Control UART(Txd/RXd, 3.3Vp-p), CCVC(with SCX-RD100)
Video Output VBS 1.0V p-p (75ohm Terminated)
Power Power Input DC+9V ~15V
Power Consumption about Normal~Max. 280~330mA (DC12V)
Operating Temperature Absolute :-10
˚C~+50 ˚C
Operating Humidity Less than 90%
Dimension, Weight 51.0(W) x 55.0(H) x 98.0(D) mm, about 230g

Version 1.1
- 7 -
3-2. Spectral Response Spec.
CCD (ICX448AK/449AK)

Version 1.1
- 8 -
3-3. Hardware Spec.
Rear View
①CN207 :I/O Connector-1
Pin NO Pin Name Description Normal Active I/O
1RxD Read Data
CMOS 5V (Low: Max 0.8V, high:min.3V) I
2TxD Send Data
CMOS 3.3V (Low: Max 0.1V, high:min.2V) O
3GND Ground (for TxD/RxD) -
4DC IN Power input (DC +9V ~ +15V) I
5GND Ground (for DC IN) -
6VBS Composite Video Output O
7GND Ground (for VBS) -
8LPULSE Line Lock Control Clock I
9GND Ground (for VBS) -
Molex 52207-0960
②CN3 :Connector for upgrading Camera Program (※used for factory only)
Pin NO Pin Name Description Normal Active I/O
1FSPE JTEG Upgrade Mode Setting +3.3V 0 I
2DSPSCK JTEG Upgrade Clock I
3DSPSDO JTEG Upgrade Data Output O
4DSPSDI JTEG Upgrade Data Input I
5DSPSTB JTEG Upgrade Chip Selector I
6GND Board Ground -
7V+3.3V JTEG Jig Power Supply(Max 0.2A) O
Yeonho Electronics, 12505WS-07A00
③CN208 :Connector for communication (※used for factory only)
Pin NO Pin Name Description Normal Active I/O
1V+5V Jig Power Supply(Max 0.2A) O
2TXD UART (Txd) O
3RXD UART (Rxd) I
4GND Board Ground -
Yeonho Electronics, 12505WS-04A00
①
Zoom Lens
Tele/Wide Switch
②
③987654321
1234
7
6
5
4
3
2
1

Version 1.1
- 9 -
3-4. Interface Circuit
①Video Amp Block
②Communication (TXD/RXD) Block :TTL Level
③ Power Input Block
④ Lpulse (External sync) Block
DSP
EXT_SYN
3.3 Vp-p
※ NTSC: 60Hz ± 0.3Hz
PAL: 50Hz ± 0.3Hz
※Min.1msec

Version 1.1
- 10 -
3-5. Reliability Zoom Lens
①Zoom Operation :more than 500,000 times
Tele
side
Wide
side 1sec
1 moving
5 moving
1Cycle
5sec holding
2000step ↑ +1000step ↑
-1000step ↑
960pps (1-2phase)
Reset
Position
②FocusOperation :more than 500,000 times
Near
side
Reset
Position
1Cycle
∞
side
1sec holding
1sec
960pps (1-2phase)
360pps Woblling 5 cycle
3step
3step -400step ↑
+400step ↑
1sec holding
③AUTO IRIS Operation :more than 500,000 times
④Day/Night Operaion :more than 50,000 times
Night
DAY
1 cycle
30 sec 30 sec
OPEN
CLOSE 1.5sec 1 sec 1.5sec 1sec
1 cycle

Version 1.1
- 11 -
3-6. Dimension
Front Left Side
RearRight Side
Top Side Bottom Side
Diagonal H : 20.9 mm
Horizontal H : 18.9576mm
Vertical H : 18.4620mm
Lens Effective Angle

Version 1.1
- 12 -
3-7. Packing Specifications (1 Carton =10ea)
MODEL NAME
Zoom Module
CARTON BOX
LABEL
CUSHION PANEL
(2 x 5)
BAG CAP Test
Report

Version 1.1
- 13 -
4. Function
4-1. OSD MENU Structure
MAIN MENU Description
CAMERA SET Camera related functions and data.
INTELLIGENCE Motion detection, and more.
PRIVACY ZONE Privacy related settings
PRESET SET Preset position and Preset ID
OTHER SET Configure for Factory Defaults, and more.
COMMUNICATION Communication set.
SYSTEM INFO Displays the system information.
LANGUAGE Select alanguage on the OSD menu.
CAMERA SET Description
CAMERA ID ON/OFF, Make the camera ID and set the place. 54 characters.(2 line)
IRIS ALC/MANUAL Iris select. Setting the BLC and WDR function.
AGC(MOTION) Setting the Max Gain under the low light.
DNR Digital Noise Reduction fucntion
SHUTTER Set the shutter speed. (High shutter speed)
SENS-UP Set the shutter speed. (Slow shutter speed)
FLICKERLESS Shutter speed :NTSC(1/60 →1/100sec), PAL (1/50 →1/120sec)
DAY/NIGHT DayNight Mode (COLOR/BW/AUTO), Level set.
WHITE BAL White Balance Mode (ATW1/ATW2/AWC/MANUAL)
Select the Focus Mode: MF, ONEAF, AF
FOCUS MODE
ZOOM SPEED ZOOM Speed set
DISPLAY ZOOM ZOOM RATIO display
DIGITAL ZOOM Digital Zoom ratio set (x1 ~x12:x0.1 step)
DETAIL Aperture gain set
V-SYNC Internal/Linelock mode set
AGC COLOR SUP Color suppression amount at the AGC function
REVERSE Horizontal/Vertical Reverse
POSI/NEGA Positive or Negative Video output set
PIP Picture In Picture at Digital Zoom operation
DIS Digital Image Stabilization set
INTELLIGENCE Description
MOTION Motion detection function
ADVANCED Advanced Motion detection function (Moved/Fixed)
MASK AREA Set the motion detection exception area
DISPLAY Motion Detection display ON/OFF
SENSITIVITY Motion Detection sensitivity
RESOLUTION Motion Detection resolution
ALARM OUT Alarm out set
PRIVACY ZONE Description
PRIVACY SET Set the privacy zone
STYLE Set the privacy style (Mosaic, Color, etc)
PRESET Description
PRESET SET Set the preset (0~255)
OTHER SET Description
FACTORY DEFAULTS Set the Factory default setting
OSD COLOR OSD menu color set
COMMUNICATION Description
PROTOCOL, BAUD RATE, ADDRESS Protocol set
SYSTEM INFO Description
SYSTEM INFO Camera setting Information
LANGUAGE Description
LANGUAGE select the language of OSD menu

Version 1.1
- 14 -
4-2. Function (OSD)
□USING ICONS IN THE MENU
◆If these icons appear in the left and right corner of amenu item, you can use
the joystick to move to the previous or next menu.
◆(EXIT)
Exit the menu setting. Before you exits the menu setting, select SAVE to save your
settings, or select QUIT to cancel.
◆(RET)
Return to the previous menu.
◆(HOME)
Return to the main menu.
◆(SAVE)
Used to save your settings of MASK AREA, PRIVACY ZONE and more. Once you save
your settings, they will remain even if you select QUIT in the menu.
◆(DEL)
Used to delete your settings of MASK AREA, PRIVACY ZONE and more. Once you delete
your settings, they will not be restored even if you select QUIT in the menu.
◆This icon appears in the right of amenu containing sub menu items.
□MAIN MENU
◆CAMERA SET
Configure Camera related functions and data.
◆INTELLIGENCE
You can configure the settings of motion detection
and more.
◆PRIVACY ZONE
You can configure the privacy related settings.
◆PRESET
You can set the PRESET POSITION.
◆OTHER SET
You can configure for Factory Defaults, and more.
◆COMMUNICATION
Configure the settings regarding the UART communication.
◆SYSTEM INFO.
Display the system information including the camera version and communication settings.
◆LANGUAGE
Select apreferred one from the supported languages.

Version 1.1
- 15 -
4-2-1.CAMERA SETUP
You can configure the general settings of the module.
Select <MAIN MENU> →<CAMERA SET>.
The Camera Setup menu appears.
Change the settings as necessary, or select an item
to check.
●CAMERA ID
The CAMERA ID menu is used for you to assign aunique
name to acamera.
Use ▲▼▶◀_to select adesired character, then press
[ENTER]. In the lower input box of the screen, the selected
character will be entered.
-You can enter up to 54 characters including
alphabets, numbers and special characters.
-LOCATION :Specify the display position of the
camera ID.
When done, press [ENTER]. The camera ID will be displayed
in the specified position.
●IRIS
The IRIS menu is used if you want to adjust the intensity of radiation incoming
to the camera.
◇ALC (Automatic Light Control)
Adjust the open and close of the iris.
-LEVEL :Select an overall brightness level.
The LEVEL menu is used to adjust the overall brightness,
where “+” will increase the brightness and “.” will decrease
it.
-BLC :With <BACKLIGHT> set to <BLC>, you can specify
the BLC area. With AREA set to <USER>, you can specify
the position and size.
If you use an ordinary camera in ascene with an intensive
back light, the object will be displayed dark on the monitor
affected by the back light. To solve this problem, you can
use the BLC(Back Light Compensation) function to improve
the sharpness of the image in such ahigh contrast scene.

Version 1.1
- 16 -
-WDR :If you set <BACKLIGHT> to <WDR>, you will see
amenu where you can set the WDR options. specify the
shutter speed in WDR LEVEL, and the composition level in
<WEIGHT>. Select OUTDOOR, or INDOOR in <WHITE
BAL>. The WDR feature provides an extension of the gain
range, which is useful, especially if you work on pictures
both indoors and outdoors from inside of abuilding.
Namely, it improves the sharpness of the picture in outdoor
scenery as well as indoor.
◇MANUAL Adjust the iris level manually.
The overall brightness target of acamera will be set to ALC
level 0, while the iris can be adjusted manually.
●AGC(Auto Gain Control) /MOTION
With AGC active, if the signal strength falls below the
standard level, AGC will amplify the video signal to
automatically improve the sensitivity.
If <SENS-UP> is set to <OFF> or <FIX> mode, the
<MOTION> menu will switch to <AGC>.
With the USER ()submenu selected, press [ENTER] to
display the corresponding screen. In this mode, you can select
from VERY LOW to VERY HIGH in 16 levels, enabling deeper,
wider choices to your convenience. With the FIX ()submenu
selected, press [ENTER] to display the corresponding screen.
In this mode, you can select an individualized mode in 16
levels, regardless of the brightness.
※As long as the DAY/NIGHT menu is set to AUTO in
Camera Setup, the AGC menu is not available.
※As long as FLICKERLESS is set to ON, the AGC mode
is not available.
※If you set BACKLIGHT to WDR, the AGC fix mode is not
available.
※If the DAY/NIGHT menu of the CAMERA SET is set to
AUTO, the AGC menu will be deactivated.
※If FLICKERLESS is set to ON, the AGC FIX mode will
be disabled.
You can specify alevel of AGC for controlling the camera motion. This is available only of
the SENSE UP menu is set to AUTO. Select F.FAST if you want to monitor avery fast
moving object in alow contrast scene, and S.SLOW if monitoring avery slow moving,
inanimate object in the same condition.
※As long as DAY/NIGHT is set to <AUTO>, the <MOTION> menu is not available.

Version 1.1
- 17 -
●DNR (Digital Noise Reduction)
Reduces the noise on the screen. This is especially useful for aseverely distorted screen.
You can set the level if you set DNR to USER.
This module use the motion adaptive DNR algorithm. This is mixed 2D & 3D method data
depends on motion.
●SHUTTER
The SHUTTER menu is used to set the fixed high-speed electronic shutter, auto high speed
electronic shutter and external high speed electronic shutter(EXT).
You can select one of 7options from 1/100(PAL:1/120) to 1/10K for the fixed high speed
electronic shutter, which is mostly used for imaging afast moving object.
※As long as SENSE UP is set to AUTO, FIXED /FLICKERLESS to ON /BACKLIGHT
to WDR, the SHUTTER menu is not available.
●SENS-UP (Low Speed shutter)
Automatically detects the ambient level of darkness in the dark or low contrast scene to
extend the accumulated time, keeping the image bright and sharp; It can be also used as
FIX mode.
※If the SHUTTER menu is set to fixed electronic shutter mode, the SENSE UP menu
will not be available.
If FLICKERLESS is set to ON, or BACKLIGHT to WDR, the FIX mode of the SENSE
UP menu is not available.
●FLICKERLESS
If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent
possible screen distortion due to amismatch between the vertical sync frequency and the
blinking frequency of the lighting.
※If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS>
menu is not available.
●DIS (Digital Image Stabilization)
Digital Image Stabilization will set the anti-shake compensation.
※If you set DIS to ON, the compensation area will be enlarged as set in the digital
zoom factor.
If you set the digital zoom factor to greater than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.
●DAY/NIGHT
◇DAY
Fixed to DAY mode, regardless of the scene.
◇NIGHT
Fixed to NIGHT mode, regardless of the scene.
If BURST is set to <ON>, the burst signal will be output
long with the black and white composite video signal.
◇AUTO
According to the luminance, this will switch DAY to NIGHT mode, or vice versa.
※If you use an infrared light source while in AUTO mode, this may cause afailure in
AUTO SWITCH or AUTO FOCUS.

Version 1.1
- 18 -
-BURST :If set to <OFF>,theburstsignalwillnotbe
output in NIGHT mode.
-DAY→NIGHT BRIGHTNESS :Specify the brightness level
switching from COLOR to BW filter. Adjusting from HIGH
toLOWwillcausetoswitchthefilterinadarker screen.
-DAY→NIGHT DWELL TIME :Time required to determine
the filter switch.
-NIGHT→DAY BRIGHTNESS :Specify the brightness level
switching from BW to COLOR filter. Adjusting from HIGH
toLOWwillcausetoswitchthefilterinadarker screen.
-NIGHT→DAY DWELL TIME :Time required to determine
the filter switch.
-MASK AREA :If there exists abright spot light source in
anight scene, you can specify the size and position as
needed. This will prevent an error in switching filter, or
failure to determine the filter switch in anight scene
where abright spot light source exists.
Any excessively bright area in anight scene will be
masked.
※You can specify MASK 1and 2simultaneously.
※If <BACKLIGHT> is set to <BLC>, the MASK AREA
function is not available.
●WHITE BAL
If you need to adjust the color according to the ambient
illumination, you can use the <WHITE BAL> function.
-DAY :You can set the RED, and BLUE value in DAY
mode. The screen will be displayed in colors according
to your settings.
You can set the R-GAIN, and B-GAIN value only in
<AWC> mode.
-NIGHT :You can set the <WHITE BAL> according to the
ambient illumination. If NIGHT mode is set to <OFF>,
the <WHITE BAL> will operate in amode specified in
DAY mode at all times; otherwise, the screen will switch
to amode specified in <DAY/NIGHT>.
You can set the RED, BLUE and BRIGHTNESS value in
DAY mode. The screen will be displayed in colors
according to your settings.

Version 1.1
- 19 -
According to the specified recording mode, select a< WHITE BAL> mode with
necessary options.
-ATW1,2 :The camera can automatically adjust the color temperature in real time,
according to the ambient conditions.
(Color temperature range ATW1: 2500K ~ 9500K, ATW2 : 2000K ~ 10000K)
-AWC :Pressing [ENTER] on adesired item will perform ATW once.
※You can set the R-GAIN/B-GAIN value.
- 3200K : Set the color temperature to 3200K.
- 5600K : Set the color temperature to 5600K.
-RED :Adjust the strength of the red color.
-BLUE :Adjust the strength of the blue color.
-R-GAIN/B-GAIN :Specify the current color temperature manually. (only in AWC state)
-BRIGHTNESS :Specify abrightness level switching from DAY mode to NIGHT mode set.
●FOCUS MODE You can select afocus mode according to the angle that
you adjusted for camera recording.
-AF :This will monitor the screen continuously to focus
automatically. If you adjust the focus manually, that will
operate the same as in <MF>. This will also restore
focus after the operation of zoom.
-ONEAF :Restores focus after the operation of zoom,
and operates the same as in <MF> unless the operation
of zoom is executed.
-MF :You can adjust the focus manually.
※While you are working on the following objects, <AF> may not work properly.
If this is the case, use <MF> instead.
-Very bright object, or dominant object in adark scene
-Object against the rear side of amoist or dirty glass
-Ascene where nearby and distant objects co-exist
-White wall or single-colored object
-Venetian blinds and other horizontally striped objects
●ZOOM SPEED
You can adjust the zoom operation speed.
The zoom speed is the fastest when the value is 4.
●DISPLAY ZOOM
You can set to display the zoom status on the screen.
It will disappear in about 3seconds if the zoom factor has no further change.
●DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of
x39. If you set DIGITAL ZOOM to x12, you can take ashot at up to x468 (39x12).
When you set DISPLAY ZOOM as on, you may see zoom value on the screen.

Version 1.1
- 20 -
●DETAIL
Controls the horizontal or vertical distinction.
●V-SYNC
Select the vertical sync mode for INT or LINE.
IfyouselectINT,thecamerawilluse the internal synchronization.
If selecting LINE, the camera will use the external power source frequency for the
synchronization. The LL-PHASE can be adjusted as appropriate.
※No input the L-Pulse signal will fix V-SYNC to INT, which can not be changed.
●AGC COLOR SUP (AGC Color Suppression)
Adjust the color scheme according to AGC operation value.
●REVERSE
Mirrors video signals horizontally, vertically, or both.
●POSI/NEGA :+,-
Output as it is or mirror the video brightness signal.
●PIP (Picture In Picture)
Displays asub image together with the main image on the same screen using the Picture
In Picture function.
※If more than one PRIVACY ZONE is specified, and PRIVACY SET to <ON>,
the PIP function is not available.
As long as SENSE UP is set to FIXED, PIP menu is not available.
According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.
4-2-2. INTELLIGENCE SET UP
You can set the motion detection and tracking in the
INTELLIGENCE menu.
※In following situations, motion detection and tracking
function may not work properly.
-When there is sudden changes of brightness
-When the device moves
-When acertain object’s movement fills most of the
framing area
-When there is difficulties in distinguishing the moving
object and background.
●MOTION
-TRACKING :Detects and tracks amoving object.
-DETECTION :Detects amoving object.
●ADVANCED
If an object on the screen suddenly disappears or an object comes out of nowhere and
stays for acertain time, the area will be displayed.
※In following situations, FIXED/MOVED detection may not work properly.
-When multiple motions continue arbitrarily.
-When the object that is fixed continues to move in the same position.
-When anewly appearing object conceals another object that is moving.