Samsung SCD-5020 User manual

Super High Resolution Dome Camera
User Manual SCD-5020

Super High Resolution Dome Camera
User Manual
Copyright
©2014 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
•If the system behaves abnormally because you run a program irrelevant to the system operation.
•Deteriorated performance or natural worn-out in process of time
Design and specifications are subject to change without prior notice

Before operating the camera, confirm the camera model and correct input power voltage. To help you
understand this manual thoroughly, we'll introduce our model description.
■ SCD-5020 SERIES
• NTSC MODEL • PAL MODEL
SCD-5020N SCD-5020P
■ MODEL DESCRIPTION
• SCD-5020X
_
 •SIGNAL SYSTEM
N→NTSC MODEL
P→PAL MODEL
SIGNAL SYSTEM

4_ safety information
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is
present within this unit.
This exclamation point symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING
yTo prevent damage which may result in fire or electric shock hazard, do not expose this appliance to
rain or moisture.
yTo prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.Using any other
adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock,
or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat

English_5
●safety information
generation or fire.
4. Securely plug the power cord into the power receptacle. insecure connection may cause fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with
water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling
objects.
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately
disconnect the power source and contact the service center. continued use in such a condition may
cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify
this product in any way. (samsung is not liable for problems caused by unauthorized modifications or
attempted repair.)
10.When cleaning, do not spray water directly onto parts of the product. doing so may cause fire or electric
shock.
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to
excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature (over 55°C), low temperature (below -10°C), or
high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then move or
reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause
fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the
CMOS image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10.Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.

6_ safety information
safety information
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may cause undesired
operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment
Regulations of ICES-003.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.

English_7
●safety information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.
13.Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination
to avoid injury from tip-over.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the
environment, and is taking a number of steps to provide customers with more environment-friendly
products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and
indicates that the product satisfies the EU RoHS Directive.
important safety instructions

8_ contents
INTRODUCTION
9
9Features
10 Components and Accessories
11
Component names and functions
INSTALLATION
12
12 Before Installation
12 Installation
14 Adjusting the monitoring direction for
the camera
CONNECTION
15
15 Connecting to Monitorr
15 Connecting to Power
16 Using Coaxial Communications
CAMERA OPERATION
18
18 Menu Configuration
18 Menu Setup
TROUBLESHOOTING
33
33 Troubleshooting
SPECIFICATIONS
34
34 Specifications
37 Dimension
contents

English_9
●INTRODUCTION
FEATURES
yHigh Resolution
Use of a 1.3 mega pixel CMOS device provides clear pictures with a horizontal resolution of 1000.
yExcellent Sensitivity
The built-in high sensitivity COLOR CMOS produces a clear image.
- 0.09Lux (F1.8, 50IRE), 0.002Lux (1sec, F1.8, 50IRE)
0.05Lux (F1.8, 30IRE), 0.001Lux (1sec, F1.8, 30IRE)
ySSNR4 (Samsung Super Noise Reduction) Function
High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a
vivid, high definition video even in the dark place.
yDay&Night
This camera has a function that automatically selects the mode that is appropriate for daytime
or night-time conditions. The COLOR mode operates in daytime conditions to provide optimum
colors, and B/W mode operates in night-time conditions to enhance the definition of the image.
ySSDR (Samsung Super Dynamic Range)
If an object has a large variance between bright and dark areas, it will keep bright areas bright and make
selected dark areas bright, so that the overall brightness can be maintained.
yPROFILE
You can set a mode according to the camera installation conditions.
- BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER
yDIS (Digital Image Stabilizer)
The DIS function compensates for any camera movement, to produce more stable pictures.
yMiscellaneous Functions
HLC(High Light Compensation), REVERSE , D-ZOOM, SHARPNESS and PRIVACY functions are
provided.
introduction

10_ introduction
yCommunication
Coaxial communication methods are supported.
- Coaxial Communications : Pelco Coaxitron
yOSD
The camera’s OSD is complimented by 17 languages.
- English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, Polish,
Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
COMPONENTS AND ACCESSORIES
Check if the following items are included in the product package.
iv{{vt
SET
Quick Manual SCD-5020
zGoGyGkGj
SCD-5020 Quick Manual Screws
Video Output Cable
introduction

English_11
●INTRODUCTION
➊
➌
➋
➐
➎
➏
➍
➒
➑
BOTTOM
SET
➊Dome Cover
2Rotate Base : Control rotating angle of camera.
➌Pan Base : Control panning angle of camera.
➍Tilt Base : Control tilting angle of camera.
➎Video Output Terminal to Monito
➏
Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm
status or after changing a selected item.
➐Lens Module : f=3.6mm, F1 .8
➑Power Input Terminal
❾Video Output Jack
COMPONENT NAMES AND FUNCTIONS

Latch Unlocking direction
(Anti-clockwise)
Locking direction
(clockwise)
Dome cover
12_ installation
installation
BEFORE INSTALLATION
Ensure you read out the following instructions before installing the camera:
yYou have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
yDon’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it
may cause a breakdown or fire.
yBefore installing your camera, you have to adjust the lens focus, zoom, and switch settings.
yWhen installing your camera, don’t allow any person to approach the installation site.
INSTALLATION
1. Separate the dome cover by turning anti-clockwise.
BOTTOM
SET

●installation
English_13
tapping screw
Ceiling bracket
tapping
screw
Pan Base
fixation
screw
M
`The installation should be done by qualified service personnel or system installers.
`If the ceiling material is not strong enough to hold the installation screws, the camera
may fall off. Reinforce the ceiling as needed.
`To change the position of the cable, take away the Hole Cover and pass the cable
through.
2. Hold the ceiling bracket (located where the arrow points to) and separate it from the main body
of the camera by rotating it anti-clockwise.
3. Place the separated ceiling bracket so that the “Front” side faces the area to be monitored and
install it with the M4 tapping screws.
4. To combine the main body with the ceiling bracket, make sure that the pan base fixation screw
face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.
5. Adjust the camera lens to face the area to be monitored and fix the main body and the dome
cover by rotating the body clockwise.
BOTTOM
SET

14_ installation
installation
ADJUSTING THE MONITORING DIRECTION FOR THE CAMERA
`Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called
Tilt, and turning the lens on its axis is called Rotation.
-The effective range of pan is a total of 352 degrees.
-The effective range of rotation is a total of 348 degrees.
-The effective range of tilt is a total of 70 degrees.
`Methods of adjustment
1. After installing the camera, adjust the panning angle in consideration of the monitoring
direction.
2. Set the horizontal angle so that the image is not reversed.
3. Adjust the tilt angle so that the camera faces toward the monitoring object.
BOTTOM
SET
Pan
Tilt
Lens rotation

●connection
English_15
CONNECTING TO MONITOR
Connect the Video Output jack to the VIDEO-IN jack of monitor.
yAs the connecting method varies with the instruments, refer to the manual supplied with the
instrument.
yOnly connect the cable when the power is turned off.
CONNECTING TO POWER
You can connect power as shown in the following figure.
Power Input Terminal
connection
CCTV Camera
Monitor
iv{{vt
SET
----
iv{{vt
SET

16_ connection
connection
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG)
#24 (0.22mm2)#22 (0.33mm2)#20 (0.52mm2)#18 (0.83mm2)
Resistance (Ω/m) 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
yAs shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the camera may affect
the performance of the camera.
※ Standard voltage for camera operation : DC 12V±10%
※ There may be some deviation in voltage drop depending on the type of wire and the manufacturer
`Be sure to connect power only after all the installation is complete.
`Note that DC adaptor is not supplied with camera.
M
USING COAXIAL COMMUNICATIONS
yCoaxial Communications System
yOSD Control method
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT

●connection
English_17
-Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable, shown
below : If the distance between the camera and the monitor exceeds the recommended
maximum, please use an auxiliary video amp.
1234
5678
9101112
13 14 15 16
ALARMHDDNETWORKBACKUP REC
DVDRECORDER
REC
ZOOM
MODE
FREEZE
AUDIO
BACKUP
ALRAM
SEARCH
TELE WIDE VIEW PRESET
MENU
RETURN
USB
OPEN/CLOSE
DVR
• : BNC
iv{{vt
SET
` It is recommended that pure copper coax cable is used and not copper coated steel, as
this will cause issues with the communication over the coaxial cable.
` To ensure picture quality, only single-channel video output connector can be used while
camera connected to other video equipments.
M
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)

18_ setup
setup
MENU CONFIGURATION
MAIN SETUP
PROFILE
● BASIC ● DAY/NIGHT ● BACKLIGHT
● ITS ● INDOOR ● USER
SSDR
● ON ● OFF
WHITE BAL
●ATW ●OUTDOOR ●INDOOR
●MANUAL
●AWC →SET ● MERCURY
EXPOSURE
● BRIGHTNESS ● SHUTTER ● AGC
● SSNR4 ● RETURN
BACKLIGHT
● OFF ● USER BLC ● HLC
SPECIAL
● DISPLAY ● COMM ADJ ● IMAGE ADJ
● DAY/NIGHT ● DEFOG ● PRIVACY
● DIS ● VIDEO ANALYTICS ● RETURN
EXIT
●SAVE ●NOT SAVE ●RESET
MENU SETUP
Use the Function Setup switch within the camera.
Function Setup switch
SET

●setup
English_19
MAIN SETUP
▶1. PROFILE BASIC
2. SSDR ON
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
Change the status
using the Function
Setup switch.
Select the function
using the Function
Setup switch.
1. Press the Function Setup switch.
yMain SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
yPlace the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
M
`An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the
Function Setup switch.
`An item with the --- icon is unavailable due to function settings.
PROFILE
1. When the SETUP menu screen is displayed, select ‘PROFILE’ by using the Function Setup
switch so that the arrow indicates ‘PROFILE’.
2. Select a desired mode using the Function Setup switch according to the picture display you
want.

20_ setup
setup
yBASIC : The most common environment is set
to meet.
yDAY/NIGHT : It will be set automatically so
it optimizes to the day or night
conditions, respectively.
yBACKLIGHT : It will be set automatically so
you can distinguish the object
from the background in a severe
backlighting scene.
yITS : It will be set automatically so you can easily
check the traffic conditions.
yINDOOR : It will be set automatically to help you take a picture in a regular indoor lighting
condition.
yUSER : Automatically configures the camera to your custom settings.
1) Select USER for Simple Setup mode.
2) Configure the menu options to your USER settings.
3) The settings are automatically saved as USER mode.
4) Profile user mode don't initialize when menu resets.
3. In the PROFILE menu, you can confi gure the following camera settings at once.
BASIC DAY/NIGHT BACKLIGHT ITS INDOOR USER
SHUTTER 1/5~1/12000 1/5~1/12000 1/5~1/12000
1/200~1/12000 A.FLK -
AGC HIGH HIGH HIGH HIGH HIGH -
WHITE BAL ATW ATW ATW OUTDOOR INDOOR -
BACKLIGHT OFF OFF USER BLC OFF OFF -
SSNR4
ON ON ON ON ON -
DAY/NIGHT AUTO AUTO AUTO AUTO AUTO -
M
`If you select the ITS, the shutter will be set to 1/200 sec. Noise can be detected at
night.
MAIN SETUP
▶1. PROFILE BASIC
2. SSDR ON
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE